|
| 1 | Civil Work ItemsDemolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. HSR 5.7 5.7.4 In cement mortar |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. HSR 5.235.23.2 Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : HSR 5.29 5.29.1 Of area 3 sq. metres and below |
| 4 | 5.29.2 Of area beyond 3 sq. metres |
| 5 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : HSR 5.305.30.1 Of area 3 sq. metres and below |
| 6 | Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. HSR 5.42 |
| 7 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. HSR 5.43 5.43.1 For thickness of tiles 10 mm to 25 mm |
| 8 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. HSR 5.44 |
| 9 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. HSR 5.49 |
| 10 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. HSR 5.70 |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR 6.16.1.61:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR 6.16.1.21:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) HSR 6.86.8.2 40mm thick |
| 14 | 12 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded: HSR 6.116.11.1 Vertical |
| 15 | 6.11.2Horizontal |
| 16 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : HSR 6.146.14.1 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 17 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). HSR 6.16 |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for HSR 6.306.30.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | 6.30.3 Suspended floors, roofs, landings, balconies and access platform |
| 20 | Edges of slabs and breaks in floors and walls HSR 6.30.166.30.16.1 Under 20 cm wide |
| 21 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level HSR 6.33Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.6.33.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 22 | Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : HSR 7.227.22.2 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 23 | Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level. HSR 7.287.28.2 Cement mortar 1:4 (1 cement :4 coarse sand) |
| 24 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. HSR 7.30 |
| 25 | GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece. HSR 9.47.2 |
| 26 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 10.5010.50.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 27 | Providing and laying of screedof50mmthickcementconcrete 1:8:16 to be laid below the topping. HSR 10.4 |
| 28 | Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 HSR 10.7 |
| 29 | Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 HSR 10.8 |
| 30 | Providing and fixing granite stone in all shades 15mm to 18 mm thickin skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade ofGranite including labour for fixing cramps pins and dowels etc. HSR 10.51 |
| 31 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. HSR10.57 |
| 32 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. HSR 10.58 |
| 33 | Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. HSR 10.7010.70.2 Size of Tile 600x600 mm |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR 10.62 |
| 35 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. HSR 10.6310.63.2 Size of Tile 600x600 mm |
| 36 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. HSR 10.6710.67.2 Size of Tile 600x600 mm |
| 37 | 12 mm cement plaster of mix : HSR 11.511.5.3 1:4 (1 cement: 4 fine sand) |
| 38 | 11.5.4 1:6 (1 cement: 6 fine sand) |
| 39 | 15 mm cement plaster on the rough side of single or half brick wall of mix : HSR 11.611.6.2 1:6 (1 cement: 6 fine sand) |
| 40 | Cement rendering on plaster 1 mm thick HSR 11.52 |
| 41 | Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR 11.58 |
| 42 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. HSR 11.6611.66.2 Two coats |
| 43 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : HSR 11.6711.67.1 Water thinnable cement primer |
| 44 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. HSR 11.6911.69.2 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 45 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR 11.76 |
| 46 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. HSR 11.77 |
| 47 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR 11.78 |
| 48 | Wall painting with (bio grade)plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) Generally used in hospital buildings etc. complete as per Specifications. HSR 11.123 |
| 49 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) HSR 12.7 12.7.2 Kiln seasoned and chemically treated Hollock wood12.7.2.230 mm thick shutters |
| 50 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: HSR 12.3712.37.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 51 | Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : HSR 12.5612.56.2 100x75x3.50 mm |
| 52 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR 12.9812.98.2250x16 mm |
| 53 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.9912.99.2250x10 mm |
| 54 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.10212.102.1125 mm |
| 55 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fastenersto be paid for separately) : HSR 12.15712.157.1For fixed portion12.157.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 56 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. HSR 12.15812.158.2 Pre-laminated particle board with decorative lamination on both sides |
| 57 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): HSR 12.15912.159.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 58 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. HSR 12.16012.160.1 With stainless steel cover plate minimum 1.25 mm thickness |
| 59 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. HSR 12.164 |
| 60 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. HSR 13.2 |
| 61 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: HSR 13.313.3.1 Profile B13.3.1.1 Fixing with adjustable lugs with split end tail to each jamb |
| 62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :HSR 30.2830.28.1One or more coats on old work |
| 63 | Providing& fixing of Pantry Box/CB2\"-0 deep made up of water proof , terminte treatment ,WPC 18 MM thick board MIN DENSITY OF 650 KG/CUMof Reputed BrandsforSides , Top , Bottom& Horizontal & Vertical shelves of box & drawer complete as per drawings. External surface pantry box covered with 1mm thick laminated sheet of appoved colour & make. The exposed edge of shutter & shelves shall be coveredwith edge binding tapematching with laminate colour . The shuttershall be fixed to the CupboardBoxwithS.S. ContinousHinges 3/4\"X3/4\" . The item shallIincludeallAccessories S.S. Handle,S.S. TowerBolts, lock and 40mmX40mm (6 NO.) S.S. Studs etc. Complete in all respects as per drawing/ Direction of Engineer-in-charge (only front area of the cupboard shall be measured for payment) (NS) |
| 64 | Blinds for door and windows having any size Materials-Polyester & Polyester Blend,Brand -ZEBRA BLINDS,Mounting Type- Inside Mount, Outside Mount.Luxurious metal hardware profiles deliver long lasting, high quality product Multi-level light control, multi-level privacy control Lightweight fabric to allow maximum light diffusion.Excellent UV protection, insulation and energy savings. Fabric treated to resist stains and minimize dust built up.(NS) |
| 65 | Public Health Work ItemsDismantling disjointing, removal andcarriage tostores, G.I. pipelines, specials, valves and fittings. HSR 20.5020.50.115 mm internal diametre of the pipeline |
| 66 | 20.50.220 mm internal diametre of the pipeline |
| 67 | 20.50.325 mm internal diametre of the pipeline |
| 68 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: HSR 22.122.1.2 White vitreous chinaware Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 69 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : HSR 22.1022.10.2 Kitchen sink without drain board22.10.2.2 610x460 mm bowl depth 200 mm |
| 70 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : HSR 22.1022.10.1 Kitchen sink with drain board22.10.1.3 510x1040 mm bowl depth 200 mm |
| 71 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. HSR 22.1422.14.2 Flexible pipe22.14.2.1 32 mm dia |
| 72 | Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint HSR 22.16 |
| 73 | Providing and fixing 100 mm sand cast Iron grating for gully trap. HSR 22.19 |
| 74 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: HSR 22.2222.22.1 White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 75 | Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : HSR 22.2322.23.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 76 | Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : HSR 22.2622.26.3Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern |
| 77 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : HSR 22.3622.36.1 White solid plastic seat with lid |
| 78 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. HSR 22.38 |
| 79 | Providing and fixingpartitions for different type of urinals. HSR 22.5022.50.1 Vitreous Chinaware Partition plate.22.50.1.2 Large size 835mm x 355 mm22.50.1.2.1 White |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. HSR 22.86Concealed work, including cutting chases and making good the walls etc.22.86.2 20 mm nominal outer dia Pipes |
| 81 | 22.86.3 25 mm nominal outer dia Pipes |
| 82 | 22.86.4 32 mm nominal outer dia Pipes |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. HSR 22.87External work22.87.325 mm nominal outer dia Pipes |
| 84 | 22.87.4 32 mm nominal outer dia Pipes |
| 85 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : HSR 22.8922.89.220 mm dia nominal bore |
| 86 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): HSR 22.9422.94.220 mm nominal bore |
| 87 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : HSR 22.9822.98.125 mm nominal bore |
| 88 | Providing and fixing Unplasticised PVC connection pipe with brass unions : HSR 22.10122.101.245 cm length22.101.2.115 mm nominal bore |
| 89 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : HSR 22.10322.103.325 mm nominal bore |
| 90 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : HSR 22.10422.104.115 mm nominal bore |
| 91 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. HSR 22.10722.107.115 mm nominal bore |
| 92 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 HSR 22.10822.108.115mm nominal bore |
| 93 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. HSR 22.109 |
| 94 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : HSR 22.17322.173.1 With common burnt clay non-modular bricks of class designation 7.5 |
| 95 | Supplying and fixing C.I. cover without frame for manholes :HSR 22.20022.200.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg |
| 96 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. HSR 22.209 |
| 97 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. HSR 22.22222.222.1.2 110mm o/d SWR UPVC pipe lines laid complete |
| 98 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. HSR 22.22222.222.1 Single Socket Type A22.222.1.1 160mm o/d SWR UPVC pipe lines laid complete |
| 99 | Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-in-charge. HSR 22.21622.216.1 25 Litres capacity |
| 100 | Electrical Work ItemsWiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required.( HSR 23.3.6)23.3.6.1 1 run of Size 1.50 Sqmm(1/1.40mm) |
| 101 | 23.3.6.6 2 run of Size 1.50 Sqmm(1/1.40mm) |
| 102 | Wiring for Light/Fan/callbell point with modular type switch/socketand GI box, Modular type face plate etcin 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. (HSR 23.4.1)23.4.1.1 Group A |
| 103 | Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch (HSR 23.4.3)23.4.3.1GROUP -A |
| 104 | Wiring in PVCconduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing1 no 5/6 Amp 3/5 pin Modulartype socketand 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required (HSR 23.4.4)23.4.4.1 Group A |
| 105 | Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required (HSR 23.4.5) 23.4.5.1 Group A |
| 106 | Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceilingetc. includingthecostof PVCbends,inspectionboxes,iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. (HSR 23.7.6)23.7.6.2 PVC pipe of 25 mm dia. |
| 107 | 23.7.6.3PVC pipe of 32mm dia. |
| 108 | 23.7.6.4PVC pipe of 40 mm dia. |
| 109 | Providing and fixing GI concealed sheet metal boxes with inner and outer face plate includingconcealingthe box in wall and fixing in positionwith inner plate and face plate with all labour and material required for the job complete in all respects. HSR 23.8.1023.8.10.11 & 2 ModulesincludingcombinedplateforTelephoneand data |
| 110 | 23.8.10.23 Modules |
| 111 | 23.8.10.58 Modules |
| 112 | 23.8.10.612 Modules |
| 113 | Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. HSR23.8.1123.8.11.1 5 amp 1 way switch |
| 114 | 23.8.11.3 15 amp 1 way switch |
| 115 | 23.8.11.4 5 amp Socket |
| 116 | 23.8.11.515 amp 6 pin Socket |
| 117 | 23.8.11.7 step type Fan Regulator 2 modules 300 watt |
| 118 | 23.8.11.8 Telephone Socket outlet modular type |
| 119 | 23.8.11.10 Blanking plate |
| 120 | 23.8.11.11 RJ 45 computer data socket outlet for cat 6 or cable modular type |
| 121 | Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panelincluding bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. HSR 23.22.123.22.1.9 4 pole MCCB 6 amp to 100 amp , 25 KA |
| 122 | MCCBEnclosuremadeofSheetSteelsuitableformountingMCCBof following ratings HSR 23.22.223.22.2.1 MCCB up to 125 A FP |
| 123 | Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- (HSR 23.22.5)23.22.5.16 amp. to 32 amp Single Pole |
| 124 | 23.22.5.3 6 amp. to 32 amp. double pole |
| 125 | 23.22.5.840 amp to 63 amp. MCB\"s FOUR POLE |
| 126 | Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. (HSR 23.22.4)23.22.4.1 SPN DBDouble Door 4 way |
| 127 | 23.22.4.5 TPN DB Horizantal type double door type 4 way |
| 128 | 23.22.4.6 TPN DB Horizantal type double door type 6 way |
| 129 | Supply and erection of MS cable tray , duly pained as required including erectionof the sameon wall or ceilingwithnecessaryfixtureand other materialrequiredtocompletethejobinallrespectuptotheentire satisfaction of Engineer-in Charge of the work HSR 23.23.623.23.6.1 MS perforated cable traypainted with powder coating 100 X 50 X 2 mm |
| 130 | Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work.(HSR 23.23.8)23.23.8.1 2 pair telephone wire |
| 131 | Lying and fixing of cable on surface /cable tray etc as required (HSR 24.2.5)24.2.5.2 16 sqmm to 35 sqmm 2 to 4 core |
| 132 | Supply and erection of suitable compression type brass cable glands for underground Cable :-(HSR-24.2.7)24.2.7.325 sqmm to50 sqmmCable 2 to 4 Core |
| 133 | Supply of following size XLPE/PVC insulated LT cables (i) 4 corex 25 sqmm Aluminum conductorarmoured cable MAKE- Havells/KEI/Filonex /Poly Cab (N.S) |
| 134 | Supply,installation, Testing & commissioning of false ceiling LEDLuminaires15 watt Make- Havells /Philips with LED driver including connections with 0.75 sqmm PVC insulated copper conductor 2 core flexible circular cable upto 3 metre complete the job in all respects up to entire satisfaction of engineer-in-charge of the work (N.S.) |
| 135 | S/E/I/T/C of following sizes of heavy duty exhaust fan suitable for single phase 230 volts, 50 Hz AC supply complete with motor, capacitor, louvers / shutters , and required size 12mm thick ply sheet with 2 coat paint etc. complete as required. Make- Orient / Crompton/ BajajN.S. 3(i) 300mm sweep size 1440 RPM |
