New Delhi Municipal Council-NDMC has published Tender For A R And M O Building In Bm Iii Division During 2023 24. Sh Providing And Fixing Signage Steel Railing Red Sand Stone Flooring Ms Work And Other Miscellaneous Civil Work At Psoi Cub Chanakyapuri.. Submission Date for this Tender is 16-06-2023. Building Work Tenders in New Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Welding by gas or electric plant including transportation of plant at site etc. Complet |
| 4 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 5 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 6 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stone |
| 7 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 10 | Providing and fixing S.S board including frame of grade 304 pipes with braces of S.S. grade 304 and rectangular section / round section including cutting, organ welding, grading, making circumstances polishing, buffing etc. complete with necessary holes, nuts & bolts, caps & anchor plates of S.S. grade 304 ASTM groove latters as per drawing & instructions of the Engineer-in-charge excluding the cost of RCC/CC and earth work. |
| 11 | Providing and fixing Display Name Plate and boards (S.S. 304 grade)as per design / art work / logo etc. complete as per direction of Engineer -in- Charge. |
| 12 | Rubbing and polishing the kota stone, marble stone, marble chips flooring, skirting, dado, stepes and risers etc. with wax polish by machine & hand filling the joints with pigments etc. wherever required complete as per direction and entire satisfaction of Engineer - in - charge. |
| 13 | Providing and fixing 10mm thick toughened glass in wooden door, window, ventilators and partitions etc. with required size, designmoulding etc. complete as per direction and entire satisfaction of Engineer - in - charge. |
| 14 | Providing and fixing cast iron designer/ ornament tomb type cap with base complete set over 16mm square bar ( The weight shouldnot beless than 0.825 Kg/Each) |
| 15 | Providing and fixing cast iron designer/ ornament tomb type cap with base complete set over 16mm square bar ( The weight shouldnot beless than 0.300 Kg/Each) |
| 16 | Providing and fixing FRP sheets 3mm thick (approximate weight 3kg/m2) on existing M.S. grill over boundary wall and other similar location with necessaryscrews and fixture in required colour as per direction and instruction of Engineer-in-charge. |
| 17 | Providing and fixingStainless steel hinges on toughend glass door after taking out damaged old hinges from door all complete as per direction and entire satisfaction of Engineer-in-charge. |
| 18 | Providing and fixing Awning with powder coated aluminium frame of required colour and pattern in Dickson Fabric or equivalent make of approved shade & design (includingremoving of old existing damaged awning if required) etc. complete as per direction and entire satisfaction of Engineer -in - charge. |
| 19 | Providing and fixingC.P. Brass Health faucet with 8 mm dia. 1.2 mtr long flexible tube & wall hook of Jaquar make(Cat No.-ALD-573) or equivalent make etc. complete as per direction and entire satisfaction of Engineer-in-charge. |
| 20 | Providing and fixing 200X200mm Square Overhead ShowerofJaquar (Cat No.OHS-1619) make or equivalent make etc. all complete as per direction and entire satisfaction of Engineer-in-charge. |
| 21 | Providing and fixingExposed Part Kit of Single Lever in-Wall Diverterof Jaquar Make (Cat No.-VGP 81065NK) with Concealed Body for Single Lever Diverter 40mm Cartridge with Button Assembly, Cartridge Sleeve (Button On Top)ofJaquar Make (Cat No.-ALD- 065N) or equivalent make fixed in existing G.I. Pipelines with necessary cutting and chasing in brick masonary wallsetc. complete as per direction and entire satisfaction of Engineer-in-charge. |
| 22 | Purchase and taken away the dismantled unserviceable materials and issued to the contractor. The rates are mentioned below:- Dismantled Stainless steel hinges |
| 23 | Dismantled Health faucet, Exposed Part Kit Wall Diverter |
| 24 | DismantledOverhead Shower, Concealed Body of wall diverter |
| 25 | DismantledS.S. Board |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
