|
| 1 | M.S. Chain of 5/8\" (16 mm) Grade 30 (Tested & Calibrated) smooth, electric welding calibrated high tensil as per ISD 2429/II 1970. The chain should supplied with test and examination certificate as mentioned in the IS specification and should be with proper identification and inspection marking. |
| 2 | M.S. Chain of 1/2\" (12.5 mm) Grade 30 (Tested & Calibrated) smooth, electric welding calibrated high tensil as per ISD 2429/II 1970. The chain should supplied with test & examination certificateas mentioned in the IS specification and should be with proper identification and inspection markingexamination certificate |
| 3 | Galvanised D\" Shackeles of 5/8\" (Inside 1\") |
| 4 | Galvanised Wire Clip ID/14 mm (9/16mm) |
| 5 | Galvanised D\"Shackles of 1/2\" |
| 6 | Galvanised D\"Shackles of 1/4\" |
| 7 | Galvanised Wire Clip 1/8\" |
| 8 | Galvanised D\"Shackles 5/16\" |
| 9 | Alied Packing 3mm |
| 10 | Spring Washer 1/2 (12.5mm) |
| 11 | U.N.F Nuts & Bolts 1/2 x 41/2 (Half thread) make-TVS |
| 12 | Hose Clamps 1/4\" |
| 13 | Hose Clamp 1/2\" |
| 14 | Gland Packing 1/2\" / Grphite packing 1/2 for marine use black |
| 15 | Rubber packing 3mm (Black) |
| 16 | Rubber Packing 3mm (White) |
| 17 | Taflon Tape 3/4\" (19mm x 10 mts long |
| 18 | M. Seal 100 gms |
| 19 | H.T.Bolt M12 x 30 Hy.Gear (Gr 10-TVS) |
| 20 | Cutting Wheel 4\" (100 mm) (105 x 1 x 16mm) |
| 21 | Grinding Wheel 4\" (100 mm) (105 x 1 x 16mm) |
| 22 | M.S Nuts & Bolts 1/2 x 8\" (full thread) |
| 23 | M.S Washer 1/2\" |
| 24 | G. I Plain Sheet of 18 Gauge (8ft x 4ft) Make Tata/Jindal |
| 25 | White Cement Bags of 1 kg |
| 26 | Galvanised Buckets of 15 lts |
| 27 | Gland Packing 5/8\" (16mm) |
| 28 | Rubber Canvas Belt 2\" (Width 5mm) |
| 29 | U.N.F Half Threaded Hex Bolt and Nuts 3/8 x 2 1/4\" |
| 30 | P.V.C Pipe 5/16 for ferryboats (diesel Gauge Pipe) |
| 31 | White Colour cotton waste with cotton fibres and should be free from article fibres and cloth pieces (Sample to be submitted) |
| 32 | Polyproplene Rope 36mm dia 3 strands with ISI marking confirming to IS 5175 of 1992, Length of coil 220 mts weight per coil 129 kgs. |
| 33 | Nylon Rope 10 mm (for Ring buoys) |
| 34 | U.N.F Nuts& Bolts 1/2\" x 5\" (half Threaded) Make - TVS |
| 35 | Hose Pipe Clips 1 1/2\" |
| 36 | S. S. Nuts & Bolts 5/8 x 1\" (BSW) (Full thread) |
| 37 | B.S.F Nut & Bolt 1/2 x 2\" (Half Thread) Make-TVS |
| 38 | Galvanised Wire Rope 1/8\" (Accelerator Cable) |
| 39 | Hose Pipe Clip 2 1/2\" |
| 40 | Hose Pipe Clip 3\" |
| 41 | Hose Pipe Clips (S.S) 1 1/4\" |
| 42 | Spring Washer 8mm |
| 43 | Spring Washer 9/16\" |
| 44 | Spring Washer 5/16 |
| 45 | G. I. Wire Rope thimble 5/8\" |
| 46 | Rubber Packing 20 mm x 44 mm |
| 47 | G. I. Fire Bucket Round Bottom as per IS Specification |
| 48 | Iron Hings 4\" (Gate Hooks) |
| 49 | U.N.F Nuts & Bolts 1/2 x 6\" (12mm x 150 mm) Make-TVS dia 12-Half Thread |
| 50 | S.S. Nuts & Bolts 1/2 x 5\" (B.S.W) |
| 51 | B.S.F Nut and Bolts 1/2 x 2 1/2\" (Half Thread) |
| 52 | S. S. Nut & Bolt 3/8 x 3\" (BSW) |
| 53 | S.S. Nut & Bolt 3/8 x 5\" (B.S.W) |
| 54 | S.S Nut & Bolt 5/8 x 2 1/2\" (BSW) |
| 55 | H.T Bolt 8 x 60 mm Make- TVS |
| 56 | H.T Bolt M1 x 40 mm (Pitch 1.5 mm) (Make TVS) |
| 57 | Spring Washer 10 mm |
| 58 | S. S. Pipe 1\" (4 mts long) Type 304-SCH 40S OD-33.40 mm,ID-26.64 mm For water cooling pipeline. |
| 59 | S. S. Bend 1\" (Short) -25 mm (type 304) |
