|
| 1 | Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60 meters. |
| 2 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shadecomplete. |
| 3 | Dismantling ofold wooden railingworkincluding stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). |
| 4 | C.P. teak wood wrought framed and fixed including simple mouldings, straight works as in Chaukhats, including supply of all materials, labour and T&P etc.required for proper completion of work. |
| 5 | French spirit polishing Two or more coats on new works including a coat ofwood filler including cost of materials labour T&P etc complete |
| 6 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 7 | Two track two panels sliding window made of (small series)frame 52 x 44 mm &sash 32 x 60 mm both having wallthickness of 1.9 ± 0.2 mm and single glazing bead ofappropriate dimension. (Area of window upto 1.75 sqm) |
| 8 | Designing, fabricating, testing, installing and fixing in position l with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: |
| 9 | Providing & fixing of 3d Acrylic letter size 500mm hight with led Signage ligts complete as per 3d design.Hindi font 13nos,3d Acrylic logo on glow sign board size 550x550 mm complete as per 3d design |
| 10 | Retro reflective sitting type 4 with 4 mm thick ACM single side providing and fixing are reflective sign with a corijan resistant 4 mm thick with 0.420.5 mm both side aluminium skin aluminium composite panel phase 2B fully covered with high intensity prismatic seating type 4 age per IRC 67 2012,Retro reflecting sitting with bag frame MS angle of 35 * 35 * 5 mm legends later numerals and border etc should be age for more specification number 801.3.7 the seating sel have a pressure sensitive adhesive of the aggressive leg type recovering no heat solvent other preparation for addition to a smooth cleaning surface in a man recommended by the seating manufacturers the ACM aluminium composite material Selvi fixed on the back frame MS angle with ribting |
| 11 | Angle iron for signage stand |
| 12 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 13 | Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. |
| 14 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete |
| 15 | Sand filling in plinth excluding supply of necessary quantity of sand from a distance not exceeding 8 Kms from the side of work and including watering dressing etc. required for proper completion of work (Lead upto 30m & lift 1.5m) |
| 16 | Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. (coarse sand not less than in 1.25 FM) |
| 17 | Treatment of soil under existing floors using chemical emul-sion @ one litre per hole, 300 mm apart including drilling12 mm diameter holes and plugging with cement mortar 1 :2(1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1%concentration |
| 18 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 19 | Reinforced cement concrete work in SLAB having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 20 | Class-150 (Non Modular) brick work in 1:4cement and Coarse sandmortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 21 | Providing and laying D.P.C. 25mm thick with Cement concrete Consisting of One Part Cement, 1.5 Part of Coarse Sand and three part of approved 10mm grade stone grit and including water proofing material as directed by the Engineer-In-Charge in the proportion as specified by the manufacturer. |
| 22 | Painting on D.P.C. with two coats of air blown bitumen VG-10 grade @ 1.70Kg/Sqm approximate including cost of fuel if any. |
| 23 | Class-150 (Non Modular) brick work in 1:4 cement and Coarse sandmortar in Super structure including supply of all materials, labour and T&P etc. required for proper completion of the work.230 mm |
| 24 | Reinforcement of Reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level.(TMT Bars) Fe-500 |
| 25 | 15mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (II) 1 cement : 4 Coarse sand |
| 26 | 15mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (II) 1 cement : 6 Coarse sand |
| 27 | 12mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor to level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (II) 1 cement : 6 Coarse sand |
| 28 | Supply of fixing 6mm (1/4\") thick china white glazed tile in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labour for proper completion of the work. |
| 29 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 12.5mm nominal size) laid in one layer finished with floating coat of neat cement (25mm thick floor) |
| 30 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge 4.0 MM THK GLASS |
| 31 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), |
| 32 | Supply of M.S. Steel 18 gauge (1.25mm) pressed steel door chaukhat including S/F of iron hinges of 100x3 mm I.S.I. Mark with drilling holes for L-drop and pipes 15x12mm cleats for tower bolt and 40x6 mm hold fast 230mm long including supply of all materials, labours T&P carriage upto site required for proper completion of work as per direction of E/I.(a) Section 120x50mm for double revet door chaukhat with 12 hinges. |
| 33 | Supply and fixing of flush doors commercial quality conforming to I.S. 2202 Part I (1483) including fixing of wooden cleats and stoppers and including ixing and adjustment of hinges, bolts,locks, handle, springs and other fittings but excluding their supply and including painting with two coats of Black Japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. (a) 35mm thick |
| 34 | Providing & Fixing 1.00mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding uality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 35 | Wall painting (Two coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing the surface clean all of dirt, grease loose pieces and prepare smooth. |
| 36 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 37 | Finishing walls with Putty approved brand and manufacture and of required shade and undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. TWO COAT |
| 38 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:hite Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar tapsSOIL WASTE & VENT PIPES AND FITTING -II |
| 40 | Providing and fixing soil, waste and vent pipes.Providing and fixing PVC pipe conforming toIS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings 100mm dia. |
| 41 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 42 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors |
| 43 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. external of work a) 15mm dia nominal bore |
| 45 | a) 20mm dia nominal bore |
| 46 | a) 25mm dia nominal bore |
| 47 | d) 32mm dia nominal bore |
| 48 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) short body bib cock |
| 49 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete a) 15 mm nominal bore |
| 50 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter. |
| 51 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:150 x 100 mm size P type |
| 52 | Supply and installing of 300 mm width x 50 mm depth x 1.6 mm thickness perforated Hot dipped galvanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with GI suspenders including GI bolts & nuts etc as required. DSR4.6.4 (25% less of 963.00) |
| 53 | Supply and installing of 150 mm width x 50 mm depth x 1.6 mm thickness perforated Hot dipped galvanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with GI suspenders including GI bolts & nuts etc as required. DSR4.6.2 (25% less of 716.00) |
| 54 | Supply and wiring of submain with two number2.5sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit,complete in all respect. SI No. 1301C |
| 55 | Supply and wiring of submain with two number4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable iin 20mm dia. heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit,complete in all respect. SI No. 211C |
| 56 | Supply and wiring of submain with two number16 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable iin 32mm dia. heavy duty (2mm thick) PVC conduit with one number 10 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit on surface,complete in all respect. SI No. 214C |
| 57 | Supplyandlayingof 10 sq. mm 4 core aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SI No. 501 (h)-507 |
| 58 | Supply and fixing of 10 sqmm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SI No. 504 c |
| 59 | Supply and fixing of 16 sqmm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SI No. 504 d |
| 60 | Supply and fixing of 10sqmm 4 core brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge. SI No. 503 h |
| 61 | Supply and fixing of 32 mm dia. 2mm thick PVC conduit pipe (PVC casing caping to be use) on surface with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction ofEngineer in charge. SI No. 150A -186B - 188A (87.00 - 10.00 - 4.00) |
| 62 | S & F surface/Flush mounting 4ways TPN distribution board with additional metal doorwithout MCB complete in all respect,as directed at site byEngineer in charge. SI No. 1026A Cat B |
| 63 | S & F surface/Flush mounting 12 ways SPN distribution board with additional metal doorwithout MCB complete in all respect, asDirect by Engineer in Charge SI No. 1025 A Cat B |
| 64 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve SI No. 1002 Cat A |
| 65 | S&F of6 Amp. to 32Amp. DP MCB (10 KA) C Curve SI No. 1009 Cat A |
| 66 | S&F of 63 Amp. 4 pole MCB(10 KA)C Curve SI No. 1020A Cat A |
| 67 | Supply and fixing of batten / angleholder complete in all respect. SI No. 405 |
| 68 | UTP 4 pair CAT 6 LAN Cable DSR 1451 |
| 69 | 2 pair 0.5 mm dia annealed copper conductor FRLS PVC insulated unarmoured telephone cable. DSR 1112 |
| 70 | Supply of ceiling fans (BEE 5 Star rated-1200mm sweep) with fan motor of A.C permanent insulation,capacitor rating confirming BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltge 220/240 volts, 50Hz, 1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. SI No. 1501 (i) |
| 71 | Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect. SI No. 1116 |
| 72 | Wiring point for light with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cablein PVC casing / caping on surface, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside,GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic laminated backalite sheet etc complete in all respect as directed including matching colour wash.SI No. 121C-188A |
| 73 | Wiring point for plug with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cablein PVC casing / caping on surface, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside,GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic laminated backalite sheet etc complete in all respect as directed including matching colour wash.SI No. 124C-188C |
| 74 | Supply and fixing of power plug with 15A/250 voltflush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. SI No. 340 |
| 75 | Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. SI No. 1203A |
| 76 | Supply and fixing ofLED Tube Light batten fittingsuitable for up to 1 X 22 watt LED tube light on surface complete in all respect. SI No. 1413A Cat AA |
| 77 | Supply and fixing ofwater tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in allrespect. SI No. 1417 Cat AA |
| 78 | Supply and fixing ofrecess/ Surface/ Pendentmounting round10 to 15 Watt LED Down Lighter having Powder coateddie cast aluminium housing withheat sink, diffuser/ Reflector and driver set complete in all respect. SI No. 1402 Cat AA |
| 79 | Supply and fixing of recess/Surface/Pendentmounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing withheat sink, diffuser/ Reflectorand driver set complete in all respect. SI No. 1401 Cat AA |
| 80 | Supply and fixing ofrecess/surfacemounting round24 Watt to 32 WattLED Down Lighter having Powder coateddie cast aluminium housing withextended heat sink, diffuser/ Reflector and driver set completed in all respects. SI No. 1404 Cat AA |
| 81 | Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. SI No. 1421 Cat AA |
| 82 | LED Bulb 9W (EESL) |
| 83 | Amount For GST |
