Military Engineer Services-MES has published Tender For Spl Repair To Or Md Accn Bldg No P-25/341-360 (20 Qtrs) And Addition Alteration Of Existing Water Pipe Line And Sewage Pipe Line At Rwa-10(Bsc) At Patiala Mil Stn. Submission Date for this Tender is 27-06-2023. Building Work Tenders in patiala Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for cement plastering 15mm thickin cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer"s instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement directed complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 6 | Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 7 | Applying wall care putty inwalls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior/internal painting complete all as specified and directed. |
| 8 | M & L for Applying two coats of oil bound distamper white or tintedwith putty over a coat ofprimer on walls incl one coat of primer over & incl preparation of old/New surface of wall all specified and directed by Engineer-in-Charge. |
| 9 | Preparation of new/old plasteredsurfaces of ceiling and applying three coat of white wash on ceiling surfaces all as specified and directed. |
| 10 | Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 11 | M & L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 12 | M & L for Preparation of new wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 13 | Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer"s instructions and all as specified. Note : Theapplication of rust removal shall be gotdone through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 14 | Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer"s instructions and all as specified. Note : Theapplication of Cementitious Coating for Corrosion Protection shall be gotdone through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 15 | Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer"s specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereeverrequired and as per directions of Engineer-in-charge. Consumption: 0.5 kg/m2. complete all as per manufacturer"s instructions and all as specified. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. Note : Theapplication of Epoxy Bonding Primer shall be gotdone through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 16 | Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in25 mm thickness. Yield: approx. 0.84 ltr/kg. System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79. Consumption of 2.1 Kg/Sqm/mm Note : Theapplication of Polymer repair Mortar shall be gotdone through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 17 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 18 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 19 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing t, supply & fixing in opening as per specification & drawing complete all as specified and directed. |
| 20 | S&F Powder coated Pressed steel frames size 105x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 21 | S&F Powder coated Pressed steel frames size 125x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 22 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing along with necessary aluminium mongaries for fixing of door,complete all as specified and directed by Engineer-in-Charge. (a) Stainless Steel (304 Grade) Butt Hinges 150mm -3 nos per leaf (b) Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Aluminium Handles 150 mm - 2 nos per leaf |
| 23 | S&F factory made flush shutters 35 mm thick, solid core construction, with particle board core and plywood face panels, commercial type on both sides with both faces are covered with decorative face veneer with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250mm- 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 nos per leaf ( Note :- Cost of butt hinge for shutter fixing with new chowkhats is included in item above .) |
| 24 | S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated including prepration of new wood surface ,applying two coats of synthetic enamel paint over a coat of pink primer all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm- 1 nos per leaf(e) 200 mm long MS rat tail pattern spring hinge including roller and roller plate - 01 No per leaf ( Note :-Cost of butt hinge for shutter fixing with new chowkhats is included in item No 3 & 4 above . Cost of butt hingesfor shutter fixing with old chowkhats is catered in this item including removal of existing damaged butt hinge .) |
| 25 | S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including fixing like welding etccomplete all as specified and directed. |
| 26 | Steel window box type usning ERW hollow "P" section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, etc. all as shown all as shown on drawing No TD-191 (R) sheet 1/4 to 4/4 complete all as specified and directed by Engr-in-Charge. |
| 27 | Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcherwith cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. |
| 28 | Demolition of cement concreteun -reinforced in ground floors and pavings n.exc 15cm thicknesscomplete all as specified and directed. |
| 29 | Material and labour for plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed. |
| 30 | Material and labour for Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measered sepretly complete all as specified and directed. |
| 31 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. Make as approved consistingof a coat of bitumen primer @ 0.40 Ltr/Sqm by the samemembrane manufacturer ofdensity 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, thelayer membrane shall be laid using butane torch and sealling alljoints etc after the surface complete as per standard practice as per manufacturers instructions. |
| 32 | Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified and directed. |
| 33 | Providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed. |
| 34 | S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F for 4mm thicck Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each panecomplete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F stainlessHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc for curtain rod incl all fixing complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F stainless steel sink with drainage board,1.00 mm thick, glossy finish, for kitchen with plugs washers and waste couplingof 32mm diaand including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed. |
| 38 | S&F Sink Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect complete all as specified and directed. |
| 39 | M&L for un-polished kota stone slabs of sizes not less than 600X1800 mm, fixed in position as per required size, machine cut as in shelves/partitions of cupboards and the like works, 20-22 mm thick including bull-nose the front length, set and jointed in cement mortar (1:4) and complete fixed in position complete all as specified and as directed. Note : Single piece should be used in shelves top/partitions of cupboards. |
| 40 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises |
| 41 | M & L for Non-skid coloured glazed ceramic tiles 7 to 8 mm thick (square or rectangular) are of each tile exc. 0.18 sqm but n. exc 0.36 sqm(unchamfered/ Jointless) in floor etc. set and jointed in neat cement slurry @ 3 Kg per SQM and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 42 | M&L for ceramic glossy finish, joint free premium quality coloured tiles 450 x 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering. |
| 43 | M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors, steps, cills etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 44 | Providing machine cut Kota stone slab flooring 18-20 mm thicklaid over 20mm thick cement mortar 1:3 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position complete all as specified and directed. |
| 45 | S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete all as specified and directed. |
| 46 | S&F 15 mm dia Bib Tap cast copper alloy fancy type CP withcrutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 47 | S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs complete all as specified and directed. |
| 48 | S & F 15 mm dia Stop cock cast copper alloy fancy type CP withlong shank and cup (concealed type) , screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 49 | S&F Stop valves, fancy type, CP with long shank and cup (concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position in repairs, complete all as specified and directed. |
| 50 | Vitreous china squatting pan of Orissa patten size 580 x 440 white with ( P trap long size) joint run and leadfront or back inlet with integral footrest including connection to trap and to flushing pipe, etc, fixed in repair complete and making good to floor in CM 1:3 incl taking down existing all as directed and specified. |
| 51 | S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and with flush pipe32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.and taking down existing of any description/size complete all as specified and directed. |
| 52 | S&F vitreous china premium/1st quality wash basinwhite/ivory/off white, flat back, size 500x400mm or 550x440 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. waste pipe and coupling or connections incl all necessary accessories for fixing, packing, union completein all respect as per manufacturer"s instructions and taking down existing of any description/size complete all as specified and directed. |
| 53 | S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 54 | S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed. |
| 55 | S&F doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect CPVC to PVC tankincl taking down existing complete all as specified and directed. |
| 56 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and directed. |
| 57 | S&F PVC connections 15mm size with brass nuts of length 450mm complete all asspecified and directed. |
| 58 | S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and directed. |
| 59 | S & F of cast iron soil, waste and vent pipe,100mm bore, sand castin any length, with or without ears, with leadjoints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connectionscomplete all as specified includingtaking down of existing unserviceable pipe complete all as specified and directed. |
| 60 | M&L Cast iron multifloor trap 110mm dia and 600mm long including jointing with solvent cement in repair complete all as specified and directed. |
| 61 | Cast iron bend duck foot or heelrest, radius for 100mm bore pipe, as in repairs, complete all as specified and directed. |
| 62 | S&F cast iron juction combination "T" equal or unequal for 100mm bore with access door as in repair complete all as specified and directed. |
| 63 | S & F for Cast iron bends/Tee duck foot or heel rest, radiusfor 100 mm bore pipe, complete all as specified and directed. |
| 64 | S&F CI nahani trap incl jointing to waste pipe in neat cement 100mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed. |
| 65 | M&L for cast iron cowl of 100mm dia complete all as specified and directed. |
| 66 | Salt glazed stone-ware gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type "P" or "S" incl CI grating fixed in repair complete all as directed and specified. |
| 67 | Demolitionofbrickworkorstone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed. |
| 68 | M&Lforbrickworkincementmortar(1:6) usingsubclass"B"bricksstaightorcurved on plan exc 6.0 m mean raidus complete all as specified and directed. |
| 69 | M & L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection, basse for tanks etc 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed. |
| 70 | Demolition of cement concreteun -reinforced of any description and in any position complete all as specified and directed. |
| 71 | M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks,as in base of floors and other similar items complete all as specified and directed. |
| 72 | M&L 25mm thick cement concrete Type B1 1:2:4 (12.5mm graded aggregate)as in floor finished rough to recieve floor finishes etc complete all as specified and directed. |
| 73 | M & L for Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed |
| 74 | Taking up or down existing steel tubing and connections, 15mm or 20 mm bore complete all as specified and directed. |
| 75 | S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified and directed. |
| 76 | S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified and directed. |
| 77 | S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction,fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged CI rain water pipe complete all as specified and as directed including P or S Tees traps complete all as specified and directed. |
| 78 | S&F PVC (SWR) bends/tees of any radius for 110mm bore with access door as in repair complete all as specified and directed. |
| 79 | S&F Raking out joints/pointing to brick work or brick tiles, laid flat in floors,surface channels, roofs etc. and M&L for flush pointing in CM 1:3 to bricks laid flat or brick tiles in pavings, aprons etc complete all as specified and as directed. |
| 80 | Excavation in trenches for taking out, laying of pipes not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out in soft/loos soil complete all as specified and directed. |
| 81 | Returning filling in trenches, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. (Surplus soil if any shall not be removed but left proud over the trench) |
| 82 | Taking up/out HDPE pipe of 40/50 mm dia including all fittings complete all as specified and directed. Fitting such as three waytee if in servicaeble condition should be reused. |
| 83 | Taking up or down steel water tubing / thin walled Flexible Quite coupling galvanised steel /ZRW/HFW pipe of size 25 mm (1") complete all as specified and directed. |
| 84 | Relaying, jointing and testing serviceable GI tubing 25 mm bore as retrieved here-in-before in any length including cleaning, cutting, necessary fittings, laid in trenches or fixed to wall, floor complete all as specified and directed. (Excavation & earth work shall be measured and paid separately). |
| 85 | Supply and fix in replacement Galvanized steel water tubing, medium grade of pipe 40 mm bore , screwed and socketed joints with and including all required fittings as in trenches, floors, on walls etc complete all as specified and directed. |
| 86 | Taking up Gun metal gate valve 40 mm dia along with demolition of valve pit chamber complete all as specified and directed. |
| 87 | Supply and fix gun metal glove or gate valve with iron wheel head, screwed both ends for iron pipe and fixed in wall of 25 mm dia including required fittings complete all as specified and directed. |
| 88 | All as per item no. 80 but before exceeding 1.5 Mtr and not exceeding 3.00 Mtr depth complete all as specified and directed. |
| 89 | Removing of excavated Material n.exc 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed . |
| 90 | M & L Brick work with sub class "B" bricks straight& curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 91 | M&L PCC (1:4:8) type D2(using 40 mm graded stone aggregates) as in foundation,filling andmass concrete complete all as specified and directed. |
| 92 | M&L RCC (1:2:4) type B-1 using 20mm graded mechanically crusted stone aggregate as in benching of manhole coping plinth coarse bands stops etc including necessary form works complete all as specified and directed. |
| 93 | M&L Reinforced concrete pipes, class NP2 grade A laid in trenches and jointed in cement mortar (1:1) complete with collars bore in pipes 150 mm, complete all as specified and directed. |
| 94 | M&L Reinforced concrete pipes, class NP2 grade A laid in trenches and jointed in cement mortar (1:1) complete with collars bore in pipes 200 mm, complete all as specified and directed. |
| 95 | M & L for RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in precast slabs for covers of manholes and placed in position necessary from work hand placing of manhole cover on varsion complete duly emboshed month and year all as specified and directed. |
| 96 | M & L for TMT bars 6 to 8mm dia cut to length bent to shape required incl cranking bending, spirally , hooking ends and binding with mild steel wire not less than 0.9mm dia (annealed) complete all as specified and as directed. (Note : The payment shall be made only after placing of cover on manholes) |
| 97 | M&L Cuttinginto existing manhole for connecting new drain pipe (200mm dia), making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc. complete all as specified and directed. |
| 98 | M&L for cement concrete bed to drain pipes incl packing under and haunching against the sides of pipe aftr they are laid &tested for 150mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complte all as specified and directed |
| 99 | M&L for cement concrete bed to drain pipes incl packing under and haunching against the sides of pipe aftr they are laid &tested for 200mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complte all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
