National Hydroelectric Power Corporation Limited has published Tender For Repairing, Painting And Devlopment Of Recreation Center And Its Surrounding Areas Of Rangit Power Station. Submission Date for this Tender is 22-06-2023. Building Repair Tenders in rangit Sikkim. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) dressing of sides and ramming of bottoms, lift up to 1.5 includinggetting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 3 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:3:6 (1cement, 3coarse sand, 6 graded stone aggregate of 20mm nominal size) |
| 4 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 5 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.1:4 Mix |
| 6 | Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 7 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)-Floor slab, roof slab, landing, balcony and access platform. |
| 8 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)-Square columns |
| 9 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge). |
| 10 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 15 mm nominal outer dia Pipes pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia pipes |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal outer dia Pipes pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 13 | Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) With imported timber from outside the state all types of frames complete. |
| 14 | Providing fitting and fixing in position of fully paneled shutters 32mm thick panel door in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete. |
| 15 | Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 16 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 17 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed ( loreno, bronzo,colubia or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 18 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 19 | Providing and painting with ready mixed Enamel paints of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 20 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc. and sand papering and filling the scratches complete on New surface. |
| 21 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc. complete. |
| 22 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete:100 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 23 | Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes:100 mm dia. Supreme / Prince. |
| 24 | Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:100 x 100 x 100 x 100 mm Supreme / Prince. |
| 25 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European Bidets standard CAT NO 30001 |
| 26 | Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Orissa pan) 580mm size with 100mm SCI (Sand cast iron) P or Strap, 10 ltr low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe, cutting and making good the wall and floor etc complete. Long type or Orrisa type pan.Orissa Pan 58x44 White CAT NO 20042 |
| 27 | Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltr automatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete: Range of two urinal basins with |
| 28 | Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete. |
| 29 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) PILLAR COCK 15 MM DIA |
| 30 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) ANGULAR STOP COCK 15 MM DIA |
| 31 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL)BIB COCK LONG BODY 15 MM DIA |
| 32 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) CONNECTING PIPE |
| 33 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) SHOWER ROSE WITH ARM |
| 34 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe: 32mm Dia |
| 35 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete, Brass (Chromium Plated). |
| 36 | Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete., 125x31x4mm |
| 37 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete, Brass (Chromium Plated). |
| 38 | Providing and fixing Tower bolt 150x10mm with necessary screws etc complete, Brass (Chromium Plated) |
| 39 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 40 | Providing, fitting, fixing of 24 BWG GCI sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete. |
| 41 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 42 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level uspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash asteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. (i) With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. |
| 43 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 44 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 |
| 45 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 46 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 47 | Loading and unloading of stone boulder/stone/aggregates/sand/ kanker/moorum. |
| 48 | Loading and Unloading of Cement or Steel by Manual Means and stacking. |
| 49 | Cost of haulage excluding loading and unloading- Surfaced road:-Non-stock & stock materials |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
