Military Engineer Services-MES has published Tender For Comprehensive Br Repairs To Flooring, Plastering, Sanitary Fittings, Roof Sheeting And Periodical Services Etc At Certain Buildings Inside Tech Area, Launch Complexes, Site A, B, C Under Age Br Ii Chandipur. Submission Date for this Tender is 21-06-2023. Shed Construction Tenders in chandipur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | NOTE (Applicable for all items) :- The bidders/contractorsare advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. |
| 2 | Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) |
| 3 | Demolition of brickwork or stone boulder masonry built in cement or cement lime mortar |
| 4 | Demolition of cement concrete (Reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 5 | M&L for fly ash brickwork with modular flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete. |
| 6 | M&L for fly ash brickwork with modular flyash bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete. |
| 7 | M&L forreinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 8 | Form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exceeding 200mm thick rough finished |
| 9 | M&L for Mild steel TMT bars (Fe 500 D) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 10 | M&L for Mild steel TMT bars (Fe 500 D) 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 11 | M & L hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces |
| 12 | M&L for Plain cement concrete C-1 type 1:3:6 (20mm graded aggregate)75mm thick as in plinth protection/path. |
| 13 | M&L 40 mm thick, Cement concrete 1:2:4,type B1 using 20 mm graded stone aggregate as in pavings,and similar work finishing cement concrete surface even and smooth without using extra cement. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. |
| 15 | M&L for 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as directed. |
| 16 | M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate to receive tiles. |
| 17 | M&L for10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados complete all as specified and as directed. |
| 18 | M&L for joint free non skid colouredceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding0.06 Sqm but not exc 0.11 sqmin floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles |
| 19 | M&L for joint free non skid colouredceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding0.11 Sqm but not exc 0.18 sqmin floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles |
| 20 | M&L for joint free Glazed ceramic coloured tilesin vertical surfaces (450 x 350mm) 7mm/ 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match, with backing coat 10mm thick in CM 1:4. |
| 21 | M&L Vitrified light shade tiles 8-9mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc jointed in neat slurry and pointed in white or coloured cement to match |
| 22 | All as per Sl item No 20 above but as in skirtings/ dado. |
| 23 | Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. |
| 24 | M&L for15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall |
| 25 | Supply only intergral water proofing compound (liquid admixture) (Makes : pidilite Industries/ Impermo/Snowcem India Ltd/Sika) |
| 26 | M&L for15mm thick in cement plaster CM 1:6on brick or concrete surfaces finished even and smooth without using extra cement on wall |
| 27 | M&L for10mm thickin cement plaster 1:3 on brick or concrete surfaces finished even and smooth without using extra cement on ceilings |
| 28 | M&L for three coats of white wash as in ceilings on newly plastered surfaces including preperation |
| 29 | M&L for prepartion of newly plastered surfaces and priming plastered surfaces with alkaliresistant primer paint and applying two coats of oil bound distemper on walls. |
| 30 | M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 31 | M&L for applying one coat of acrylic weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation all as specified and directed. |
| 32 | M & L for preparation of old decorated surface of walls incl washing, rubbing down and stopping and applying one coat of oil bound distemper(White or tinted) complete all as specified and directed. |
| 33 | M&L for reparation of old decorated surface of walls incl washing, rubbing down and stopping and applying two coats of distemper oil emulsion,white or tinted ,complete all as specified . |
| 34 | M & L for preparation of old painted surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 35 | M & L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 36 | Dismantlingof stone slab and tiles laidbedded and pointed in any mortar of any description or thickness in floors, approons etc |
| 37 | M & L Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick Screed bed or backing coat for laying floor finishes in CM 1:6 complete all as specified and as directed. |
| 38 | Supplying and Laying CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 20 mm including taking down complete all as specified. |
| 39 | Supplying and Laying CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 25 mm including taking down complete all as specified. |
| 40 | Cutting, chases for concealed water tubing and making good in CM 1:3 cutting not exceeding 10 cm girth in brick wall. |
| 41 | S&F in repairs wash down water closet (pedestal pattern) complete white withplastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete |
| 42 | Supply and fix Vitreous china Squatting panOrissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding in repairs |
| 43 | Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and32mm PVC flush pipe in repairs. |
| 44 | Supply and fix PVC connection 15mm size with PTMT nuts of length 450mm. |
| 45 | S&F vitreous china wash basin, white, flat back size 600x480mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets in repairs |
| 46 | S &F in repair Vitreous China urinals,full stall type white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws,pointing around urinal back in cement; grating and Union for discharge pipe and Waste coupling 32mm dia menimum weight 45 gms. |
| 47 | S&F in repair pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high presure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs |
| 48 | S&F Stop valves in repair cast copper alloy fancychromium plated with long shank and cup( concealed) long shank 15mm bore fixed in repairs |
| 49 | S&F in repairs 15 dia fancy type chromium platedbib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron/pvc pipe |
| 50 | S & FTwo way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron/pvc pipe and fixed in repair etc complete |
| 51 | S & Fin repair CP Health faucet with 8mm dia, 1.2 Meter long flexibletube & wall hook all as specified & directed by Engineer-In-Charge. |
| 52 | S&FUrinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weigt 60gm) |
| 53 | S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 litre including HDPE Nipple anddismantling of Old water tank any type |
| 54 | S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 litre including HDPE Nipple anddismantling of Old water tank any type |
| 55 | S&F in repair Ball valves in repair high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to20mm bore pipe. |
| 56 | Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 & n.exc 500 ltr and from mouths of circulating pipes, etc. |
| 57 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore in repairs |
| 58 | S&F tubular towel rail 20mm dia brass chromium platedD type 60cm long between flanges |
| 59 | S&F 110mm PVC (SWR) pipes single sockected in any length with rubber ring joints fixed to walls including demolition of 100mm AC pipe |
| 60 | S&F PVC (SWR) bends any radius of bore 110mm with access door. |
| 61 | S&F PVC(SWR) junction duble (Double T) equal or unequal of bore 110mm bore incl provided with access door. |
| 62 | S&F 75mm PVC (SWR) pipes single sockected in any length with rubber ring joints fixed to walls including demolition of 75mm AC pipe. |
| 63 | S&F Grating doom 125mm dia with waste hole of PTMT(mInimun weight 40gm) |
| 64 | S&F in repairs seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device |
| 65 | S&F sinks with draining board made of stainless steel 1mm thick kitchen with plug washers & wastes incl bedding in cement mortar, fixing cantilever brackets & connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x160 mm. |
| 66 | M/L 600x450 beveled edge mirror of selected quality glas, mounted on 6mm thick AC building board. |
| 67 | S&F in repair door closer hydraulically regulated, designation No.3 universal typedoor shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed ® 09155, (aluminium body ) suitable allas specified and as directed . |
| 68 | S&F in repair 15 mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipeand fixed |
| 69 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length 140 mm of cover plate |
| 70 | S &F in repair Vitreous China urinals,half stall type white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws,pointing around urinal back in cement; grating and Union for discharge pipe and Waste coupling 32mm dia menimum weight 45 gms. |
| 71 | Dismantling wall and ceiling boards (E-board, insulation, perforated particle board, laminated board, gypsum boardetc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, aluminium snap grid, hangers etc. |
| 72 | S&F anodised aluminium snap gridsize 605 x 605 mm frame work for false ceiling and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 600 mm long complete all as directed . |
| 73 | M&L 4mm thick e-boards size 600 x 600 mm fixed or laid/inserted to timber/GI/aluminium frame work with screws in ceiling flat or sloping including two coats of oil bound distemper complete all as directed . |
| 74 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings |
| 75 | M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified. |
| 76 | M&L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified. |
| 77 | Dismantling structuralsteel work. |
| 78 | S&F steel work in tubular for columns, roof truss, purlins, rafters and battens etc incl special shaped washer etc complete using ERW or induction but welded tube conforming to IS :1161-1979 Gde St-240 completely providing in any curvature and as of any shape etc complete all as specified. |
| 79 | M&L two coats of synthetic enamel paint over a coat ofred oxideprimer including preparation of new treated steel surfaces. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
