Military Engineer Services-MES has published Tender For Repair Maintenance Of Roof Treatment Work Replacement Of Ac/Cgi Sheet False Ceiling Aluminium Work Rolling Shutter Gate And Certain Misc Work In Certain Places At Af Stn Arjangarh Under Ge Af Gurgaon. Submission Date for this Tender is 28-06-2023. Shed Construction Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-06-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling/removingold damaged worn out APP of any thicknessincluding screed bed or plastering of anythickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc at any distance complete all as specified and as directed. |
| 2 | Material and labour, for 15 mm thickcement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately. |
| 3 | Material and labour, for 10 mm thickcement plaster in CM (1:3)on brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed. |
| 4 | Material and labour for water proofing treatment of roof consisting as under:- (a) Applyinga tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces. (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and as directed. |
| 5 | All as per Srl item No. 05here-in-before but on vertical surfaces, using hot blown bitumen having penetration value 30/40 applied @ 1.20 Kg/ Sq.m over primer @ 0.30 litre/ Sq.m, complete all as specified and as directed by Engineer-in-Charge. |
| 6 | M&L for Providing, cement concrete type B-0 1:2:4 ( 12.50 mm graded stone aggregate as in benching,roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and as directed. |
| 7 | Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 8 | Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 9 | S & F 15mm dia tubes medium grade, galvanized, with all ISI marked fittings such as sockets, bends, elbows, tees, union etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed. Note : Cutting chases as required shall be measured and paid seperately. |
| 10 | S & F 20mm dia tubes medium grade, galvanized, with all ISI marked fittings such as sockets, bends, elbows, tees, union etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed. Note : Cutting chases as required shall be measured and paid seperately. |
| 11 | Refixing of old steel tubing and connections 15mm dia in new or old position (walls, ceiling, floors etc) using ISI marked fittings complete all as specified and as directed. |
| 12 | Refixing of old steel tubing and connections 20mm dia in new or old position (walls, ceiling, floors etc) using ISI marked fittings complete all as specified and as directed. |
| 13 | S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F 20 mm Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, including taking down existing tank complete all as specified and as directed. |
| 14 | All as per Srl item No 13 above but except water storage tank. |
| 15 | S&F Rotational moulded polyethylene water storage tank 1000 litres capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms, including all fittings and 20mm size gate valves with iron wheel head including taking down existing tank complete all as specified and as directed. |
| 16 | All as per Srl item No 15 above except water storage tank |
| 17 | S&F in repairs 15mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engr in Charge. |
| 18 | S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engr in Charge. |
| 19 | Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed. |
| 20 | M&L for Brick work with sub class "B" Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and as directed by Engineer - in - Charge . |
| 21 | M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished fair and even, complete all as specified and as directed. |
| 22 | M&L for use and waste ofform work to soffits of suspended slab such as roof slab, floor slab landings and similar work not exceeding 200 mm thick for finish complete all as specified and as directed by Engineer in charge . |
| 23 | M&L for RCC 1 : 1.5: 3, Type A–1 using 20mm graded aggregates for slabs supported on walls, beams, columns and in shelves, the like all as specified and as directed by Engineer - in - Charge. |
| 24 | S&F TMT bars 10mm dia and over cut to length bent to shape required cranking, bending spirally for hooping for columns hooking ends and bindings with and including mild steel wire (Annealed) not less than 0.9m dia or securing with clips, all as specified and as directed by Engineer - in - Charge. |
| 25 | Dismantling Asbestos cement sheets (corrugated ,semi corrugated etc) in roof coverings incl ridges etc complete all as specified and as directed by Engr in Charge. |
| 26 | M&L for Pre-painted galvatume aluminum zinc coating GI based corrugatedsteel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsallas specified and as directed. |
| 27 | S&F false ceiling with exposed GI system using “SILHOUETTE XL 15 mm (Nominal) designer Grid "Armstrong"white or Global white with black reveal and 600 x 600 x 15 mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette). Making necessary framework for AC ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level and incl dismantling old unservicable false ceillingcomplete all as per manufacturer’s instructions, specified and as directed. |
| 28 | S&F in repairs steel rolling shutter 1.25 mm thickness of laths without ball bearing as specified incl top cover archoring rod, hasp & staple and shop coat of primer erected in position as indicated complete push pull or manual type including taking down of old shutter completeall as specified and as directed by engineer in charge. |
| 29 | All as per item No 28 hereinbefore but gear operated type with bevel gear box and crank handle. |
| 30 | S&F sefty lever lock MS with 04 levers for rolling shutters complete all as specified and as directed by Engineer in charge. |
| 31 | S&F ball bearing for rolling shutters complete all as specified and as directed. |
| 32 | M&L for greasing and servicing (overhauling) of steel rolling shutter of manual type of any size incl greasing and survives of ball bearing,hood cover anchoring rod hasp and staple completeall as specified and as directed by Engineer in charge. |
| 33 | M&L for greasing and servicing (overhauling) of steel rolling shutter of gear operated type of any size incl greasing and survives of ball bearing,hood cover anchoring rod hasp and staple completeall as specified and as directed by Engineer in charge. |
| 34 | Dismantling wrought iron or mild steel work of any description all as specified and as directed by Engineer - in - Charge . |
| 35 | S & F steel work in mild steel trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 (grade st-240) complete all as specified and as directed by Engineer - in - Charge. |
| 36 | S&F Framed work as in doors orgates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook sand hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engr in Charge. |
| 37 | S&F 1.00mm thick mild steel plain black sheets as in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. complete all as specified and as directed by Engr in Charge. |
| 38 | M&L for Preparation new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and as directed by Engr in Charge. |
| 39 | Material and labour for preparation of old painted surfaces of steel of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed by Engr in Charge. |
| 40 | Demolition of stone slabs andtiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed by Engr in Charge. |
| 41 | Material and labour for 18-20 mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishingincl dismantl ing damaged stone slab of any description complete all as specified and as directed by Engr in Charge. |
| 42 | Material and labour for machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed by Engr in Charge. |
| 43 | S&F powder coated aluminium frame work fordoors, windows,partition s etc incl grill for windows for windows etc with one or more rebated section incl jointing cleats for fixingetc complete all as specified and as directed by Engr in Charge. |
| 44 | S&F powder coated anodised aluminium door shutters, partition wall, aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubber neoprene packing, handles two Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and as directed by Engr in Charge. |
| 45 | S&F powder coated anodised aluminium window and ventilator shutters , side hung type without sash bars aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubberpacking, aluminium anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1Nos0, hinges type B-21 100 mm long(2Nos) suitable handles (1Nos) complete all as specified and as directed by Engr in Charge. |
| 46 | S&F 12mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete.all as specified and as directed by Engineer - in - Charge . |
| 47 | S&F 5.5 mm thick selected quality tinted sheet glass and glazing clip in square fixed with PVC/neoprene gasket in aluminium frame work compelte. all as specified and as directed by Engineer - in - Charge . |
| 48 | S&F double action floor spring hydraulic regulated made up of min 1.25 mm thick aluminium sheet foundation box, main body with stainless steel cover, govering pivets made of brass, other part made up of mild steel heavy duty complete. all as specified and as directed by Engineer - in - Charge . |
| 49 | S&Fbrass six lever dead lock suitable for aluminium doors manufactured by Harrison Locks or Godrej as approved complete all as specified and as directed by Engr in Charge. |
| 50 | Taking down aluminium door shutter of any size upto 4 Sqm each and replacement of defecting pivot with new pivot & refixing in position complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Taking down aluminium door shutters of any size upto 4 Sqm each replacement of defecting floor spring with new floor spring complete all as specified and as directed by Engr in Charge. Make : Amar/Sandhu. |
| 52 | S&F in repair dead lock6 lever brass for aluminium door shuttercomplete all as specified and as directed by Engineer-in-Charge. |
| 53 | Taking down old broken glass from aluminium door, window or partition panel by removing glass clips and S&F glass ordinary 5.0mm thick in any size and refixing the glass clips in position after replacing rubber gasketcomplete all as specified and as directed by Engineer-in-Charge. |
| 54 | S&F in repair Hydraulic door closer for aluminium door shutter complete all as specified and as directed by Engineer-in-Charge. |
| 55 | M&L for complete removal of existing treatment by scraping down completely on brick wall/concrete surfaces thoroughly, washing, rubbing down with water cleaning the surface upto the entire satisfaction of Engineer-in-Charge and applyingtwo coats of exterior weather proof paint over and incl one coat of primer on old surface of walls/roofs of desired tints / colourafter preparation the surface by making surfaces completly smooth by filling holes with birla white care putty as requiredcomplete and all as specified and as directed by Engineer in charge. |
| 56 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed. |
| 57 | M&L forNon skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed by Engr in Charge. |
| 58 | M&L for Non skid ceramic coloured joint free tiles, 8 to 10 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed by Engr in Charge. |
| 59 | All as per item 58 above but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as specified and as directed by Engr in Charge. |
| 60 | M&L forcoloured glazed ceramic tiles, fixed in pattern of different colour including border of size 300x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. Note :- Pattern of the tiles will be decided by GE at the time of execution. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
