|
| 1 | Item Description |
| 2 | Dismantling steel work in built up section in channels, angles, tees, flats including all gusset plates, bolts, nuts, cutting rivets, welding including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge |
| 3 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:3 ( 1 cement : 3 fine sand ) |
| 4 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-In cement mortar 1:3 ( 1 cement : 3 fine sand ) |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought. Karai wood |
| 6 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 7 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : |
| 8 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm |
| 9 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 300x10 mm |
| 10 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 11 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm |
| 12 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete |
| 13 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 25 mm dia |
| 14 | 12 mm cement plaster of mixCement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | Chipping of unsound/weak concrete material from slabs,beams, columns etc. with manual Chisel and/ or bystandard power driven percussion type or of approvedmake including tapering of all edges, making squareshoulders of cavities including cleaning the exposedconcrete surface and reinforcement with wire brushesetc. and disposal of debris for all lead and lifts allcomplete as per direction of Engineer-In-Charge.25 mm average thickness |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Soluble Salt Stain free vitrified tiles |
| 17 | Providing and fixing in position wall panelling at all heights with 6 mm thick BWP ply board lapping with 4 mm thick Teak Veneer of approved quality in outer face, decorative teak wood bead (50 x 40 ) at top and skirting (150 x 25), comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally ply board are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm all complete as per manufacturer\"s specification as per direction of Engineer-in-Charge all complete. |
| 18 | Providing and fixing PVC false ceiling with SPUF142-D-01(different design 10mm thick 150mm width and necessary length) of approved colour concealed type panel carrier T Section(DWU:406:40:63.5mm) and L section (DWUF:405:40:48mm) with necessary screw, holdfast PVC beading and MS black pipe structure 48mm dia at 1200mm centre to centre including cutting holes and making goodthe walls completed as per direction of the Engg.-in-charge. |
| 19 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood prelaminated one side decorative lamination.on other side balancing lamination Grade I, Type II, IS:12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete.12 mm thick |
| 20 | Providing and fixing prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethene primer (fittings to be paid separately).25 mm thick |
| 21 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):12 mm thick |
| 22 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.0 mm thick |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats) over and including water thinnable priming coat with cement primer |
| 24 | Wiring for light/fan/exhaust fan/call bell point2x1.5 sq.mm 5/6 PVC insulated copper conductor cable (FR) in PV C casing and capping complete with wooden switch board with Bakelite cover and piano type switch including connection etc. as require:- (As per TSR 2021 PWD I.E Sl. No.101) |
| 25 | Wiring for light/fan/exhaust fan/call bell point 2x1.5 sq.mm 5/6 PVC insulated copper conductor cable (FR) in PV C casing and capping complete with wooden switch board with Bakelite cover and piano type switch including connection etc. as require:-(As per TSR 2021 PWD I.E Sl. No.101) |
| 26 | Providing and fixing of 3 pin 5/6 amps plug point with piano type 5/6 amps switch and socket including connection with 2x1.5 sq.mm PVC insulated copper conductor cable (FR) on switch board, earthling the 3rd pin etc. as required:-(As per TSR 2021 PWD I.E Sl. No.103) |
| 27 | Wiring for circuit/sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required(As per TSR 2021 PWD I.E Sl. No.105) |
| 28 | Wiring for circuit/sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required(As per TSR 2021 PWD I.E Sl. No.105) |
| 29 | Supplying and fixing of the following sizes wooden switch boards with 3mm thick Bakelite cover etc. as required (As per TSR 2021 PWD I.E Sl. No.605) |
| 30 | Supplying installation of 10 KA breaking capacity, B/C curve MCB of following ratings in t he existing MCB DB including connection as required: (As per TSR 2021 PWD I.E Sl. No.1215) 6 to 32 amps SP MCB |
| 31 | Supplying and fixing of following luminaries complete with necessary accessories and connection etc. as required:Box type single FTL fittings of CRCA Steel sheet housing complete with 36/40 W FTL electronic ballast and high quality reflector cover: (As per TSR 2021 PWD I.E Sl. No.1001) |
| 32 | Supplying and fixing of 1200mmsweep white color AC ceiling fan capacitor type double ball bearing complete with 300mm down rod, canopies, shackles, 3 nos. blades, including wiring the wown rod with 2x1.5 sq.mm PVC insulated copper conductor cable(FR) (ISI Marked, BEE 1 star/minimum service value 4.0 m3/min/W: (As per TSR 2021 PWD I.E Sl. No.1001) |
| 33 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required: (As per TSR 2021 PWD I.E Sl. No.604) Electrical 4 step mini fan regulator |
| 34 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required: (As per TSR 2021 PWD I.E Sl. No.604) Ding dong call bell |
| 35 | Supplying and installation of switch disconnection fuse unit (main switch) of the following ratings with all accessories including necessary MS clamp , nut, bolt etc. as required: (As per TSR 2021 PWD I.E Sl. No.1202) 32 amps 240 volts DP main switch(rewireable) |
| 36 | Providing and fitting fixing of A. C. machine(Godrej/Samsung/Blue Star/Haier/LG Make) split type 2 ton capacity alongwith accessories like industrial socket, electric wire etc. complete as per direction of the Engineer-in-charge |
| 37 | Supplying of revolving Chair(model name-Pulse High Back), Godrej Make as per direction of the Engineer-in-charge |
| 38 | Supplying of Chair(model name-Poise), Godrej Make as per direction of the Engineer-in-charge |
| 39 | Providing & installation of Sony Bravia 139 cm (55 inches) 4K Ultra HD Smart LED Google TV KD-55X74L (Black)minimum warranty period of 1(one) year as per direction of the Engineer-in-charge |
