|
| 1 | Dismantling doors, window and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area 3 sq. metres and below |
| 2 | Screping old White or Colour wash including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meters. (200ft). S.No. 708. |
| 3 | EXTERIOR SIDEWALL |
| 4 | Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meters (200 ft). |
| 5 | 10mm ceiling plaster with 1:3 Cement: Sand mortal with all T&P & Labours. |
| 6 | 12/15 MM plaster |
| 7 | S/laying repair work with Birala putti on inside plaster walls if required with all T&P |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | S/fixing of 32mm thick Flush Door Shutter LF |
| 10 | S/fixing of I.S.I Oxidize Door Fitting in Flush Door Shutter |
| 11 | S/fixing of Pin heeded Glass Pan With Pin |
| 12 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 13 | Finishing walls with Acrylic Smooth exterior Paint of Required Shade.SOR |
| 14 | Painting first coat over priming coat (but excluding cost of priming coat) on steel and other material surface upto 10cm. In width of small architectural including supply of all material, labour and T&P etc required for the proper completion of the work. Extra over item No above but for every coat of paint after first coat. |
| 15 | providing and fixing watr closet squatting pan indian type wc pan ) wwith 100mm sand cast iron Ppor S trap, 10litre low level white p.v.c flising cistern including flush pipe manually controlled device (handle leaver) conforming to is 7231. with all fitting and fixtures complete ,including cutting and making good the wall and floor wherever required white vitreous china orissa pattern W.C pan of size 580x440 mm wth intergeral type foot rests. |
| 16 | P/F 110 mm dia P.V.C. pipes ISI mark (Use as down & ventilation pipe) |
| 17 | P/F 75mm dia P.V.C. pipes ISI mark (Use as pipe) |
| 18 | P/F of P or S trap |
| 19 | P/F of 15 mm C.P. Brass Bib Cock |
| 20 | 1620(20mm od) pipe |
| 21 | 3240(40mm od) pipe |
| 22 | P/F 4\" dia cutting c.p. Brass Jali |
| 23 | Construction of mainhole (600X600)mm |
| 24 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively |
| 25 | Providing and fixing wash wasin with C.I bracket,15mm C,P brass .pillar taps ,32mm C.P brass waste of standard pattern ,including painting of fitting and bracket ,cutting and making good the wallwherever required . Whitevitreous china wash basin size 630x450 with a pair of 15mm c.p brass. |
| 26 | provding and fixing mirror of superior glass (of approvedquailty ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Ractangular shape550x400 mm |
| 27 | Repairing Door and Window And Porch |
| 28 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding conforming to IS: 2046 Type S, including cost of adhesive of approved quality. (DSR Code No. 9.127) |
| 29 | Painting Steel work with Deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/10sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture supply of all labour material and T&P required for proper completion of work.( DSR SI No 13.48.3) |
| 30 | Providing and fixing 2nd class teak wood lipping/moulded beading or taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre-Laminated particle board as per direction of Engineer-in charge. (DSR Code No. 9.112) |
| 31 | Masking Tape (DSR Code No. 8654) |
| 32 | Iron Screw 35mm |
| 33 | Rubber Shoe With MS Ring |
| 34 | Carpenter (1/3) |
| 35 | Mazdoor (1/3) |
| 36 | Cleaning Of Partition |
| 37 | Deco Paint Of Partition |
| 38 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time) (DSR SI No- 13.116) |
| 39 | Handle |
| 40 | Lock |
| 41 | 1% cess |
