}

Tender For Construction Of Barracks For Police Personnel With Development Works At Muthupettai In Thiruvarur District, thiruvarur-Tamil Nadu

Tamil Nadu Police Housing Corporation Limited-TNPHC has published Tender For Construction Of Barracks For Police Personnel With Development Works At Muthupettai In Thiruvarur District. Submission Date for this Tender is 21-06-2023. Barrack Tenders in thiruvarur Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

37902877
Corrigendum : Tender For Construction Of Barracks For Police Personnel With Development Works At Muthupettai In Thiruvarur District
Open Tender
Indian
Tamil Nadu
thiruvarur
21-06-2023

Tender Details

Construction Of Barracks For Police Personnel With Development Works At Muthupettai In Thiruvarur District

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 12-Jun-2023 Construction of Barracks for Police Personnel with development works at MUTHUPETTAI in Thiruvarur District Date 21-06-2023

Key Value

Document Fees
Refer document
EMD
INR 526900.0 /-
Tender Value
INR 10.33 Crore /-

BOQ Items

Name of Work:Construction of Barracks for Police Personnel with development works at MUTHUPETTAI in Thiruvarur District
Sl. No. Item Description
11.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.
2b. 2 to 3 mt.
31.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.
4b. 2 to 3 mt.
51.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.
62.6) Supplying and filling with 40mm HBSJ
72.7) Supplying and filling with 20mm HBSJ
87.2) Supplying and fixing of Bituminous filler pad, 20 mm tk. for expansion joint
921.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m
10b. T.W. below 2.00 m length.
1123.3) Supplying and fixing of Magnetic doorcatches
1225) Supplying and fixing of MS hold fast
1330) Finishing the top of flooringwith cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)
1431) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume
1537.1) White washing 3 coats(slaked)
1639) Supplying and fixing of MS Grills in position
1740) Painting 2 coats - New "wood work"
1841) Painting 2 coats - New "iron work"
1946) Supplying and fixing of 20 mm dia Alu. Hanger Rod
2047) Supplying and fixing of Alu. Towel rail 75 cm long
2148) Supplying and fixing of 5 pin Coat stand
2249) Supplying and fixing of Chromium plated 8 gauge picture hook
2350.3) Supplying and planting avenue trees
2450.4) Providing Tree guard
2552.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)
2653.3) Supplying and fixing of C.I. steps (5 Kg)
2755.2) Supplying and fixing of Flat Back Urinal with Accessories
28Electrical arrangements 72) Supplying and fixing of Box type Fibre Fan hook
2973.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase32A per way with neutral link
3074) Charges for assembling and fixing of ceiling"Fan"
3176) Supplying and fixing of 8 SWG G.I. wire
3277.3) Supplying and fixing of TV/Telephone line Socket
3377.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line
3478) Providing Earthing Station using pipe electrode as per IS3043 (Type I)
3586) Providing Pre-constructional Anti termite treatment
36238) Anticorrosive treatment for steel grills
37Annexure 2.1.1) Supplying and filling the basement with gravel
382.1.3) Supplying and filling in foundation and basement with Crushed stone sand
392.1.6) Supplying and filling of Stone dust
403.1.1) C.C.1:5:10 using 40mm size HBSJfor Foundation & Basement using crushed stone sand
413.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture
423.3.1) P.C.C. 1:8:16 using 20 mm broken brick jelly using crushed stone sand
434.5.1) Standardized Concrete mix M30 Grade using crushed stone sand a. In Foundation and basement
446.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼" x 2 ¾ ") using crushed stone sand with Admixture
458.5.1) Standardized Concrete mix M30 Grade using crushed stone sand a. In Ground Floor
46b. In First Floor
47c. In Second Floor
489.6.1) Brick work in C.M. 1:6using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼" x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor
49b. In First Floor
50c. In Second Floor
5110.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement
52b. In Ground Floor
53c. In First Floor
54d. In Second Floor
5511.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼" x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture(B.P.) a. In Ground Floor
56b. In First Floor
5712.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8¾ "x 4¼ "x 2") 50mm tk using crushed stone sand with Admixture a. In Ground Floor
58b. In First Floor
5914.2.1) Precast Cupboard slab 40mm tk in standardised concrete mix M30 Grade by using 3mm - 10mm HBGS Jellyusing crushed stone sand with Admixture 40mm thick a. In Foundation & Basement
6015.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor
61b. In First Floor
6215.2.1) Cuddapah Slab 40mm tk. for cupboard slab / Similar works a. In Ground Floor
6318.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,
64b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works
65c. For Square and rectangular columns and small quantities
66d. For Vertical wall
67f. For Curved surface
6821.5.2) Supplying and fixing of soild UPVC door shutter with frame
6921.5.3) Supplying and fixing in position of UPVC window of casement type (open) for all sizes
7021.5.4) Supplying and fixing in position of UPVC louvered ventilator type for all sizes
7122.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws
7222.9) Solid core TW flush door with Teak ply on both sides and TW lipping alround (35mm thick) Single leaf shutter Suitable for door of size a) 1000 x 2100mm
73b) 900 x 2100mm
74c) 750 x 2100mm
7522.9.1) Solid core TW flush door with Teak ply on both sides and TW lipping alround (35mm thick) Double leaves shutter Suitable for door of size a) 1800 x 2100mm
76b) 1500 x 2100mm
77c) 1200 x 2100mm
7826.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand
7928.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture
8029.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand
8129.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand
8232.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand
8333.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture
8434.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture
8535.1.1) Plastering in CM 1:3, 12 mm tk. with Admixture and mixed with WPC using crushed stone sand
8635.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture
8736.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide Border
88b. 75 mm wide Border
89c. 50 mm wide Border
9043.1.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods (Binding Wire insulated with PVC)
9144.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M30 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit
92b) Augering 30cm dia
9344.6.1) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe (UPVC Special Clamp)
9450.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450x300x150 mm using crushed stone sand
9550.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand with Admixture
9650.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand
9751.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark
9851.2) Supplying and fixing of HDPE water tank 5000 lit capacity with ISI mark
9952.2) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., a. 32 mm dia
100b. 25 mm dia
10152.4.1) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., (fully consealed in walls) c. 20mm dia
10253.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)
10353.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")
10454.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)
10554.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)
10656.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade "P" or "S" trap - in G.F. using crushed stone sand
10756.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade "P" or "S" trap - Other than G.F. using crushed stone sand
10857.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap
10958.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type "B". a. 110 mm dia.
110b. 75 mm dia
11158.3.1) Supplying and fixing of 110mm dia PVC SWR pipe (Soil line) with ISI mark - type "B".
11258.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - "B" with relevant specials.
11358.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type "A" for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,
11459.5.2) Supplying and fixing of Gully Trapusing crushed stone sand
11560.1) Supplying and fixing of PVC Nahani trap (4way/2way)
11661.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe
117b) 160mm dia UPVC Non Pressure pipe
11862.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend
11962.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 160mm dia PVC Equal Tee
12064.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) a. Light point with ceiling rose
121b. Light point without ceiling rose with bakelite battern holder
122c. Calling bell point with Buzzer/Calling bell
12365.1.1)Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for Fan Point
12466.1.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for Staircase Light Point.
12567.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point PVC box (Fire Retarded Box) Switch Board Itself.
12668.2.1) Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 1.1 K.V. grade cable in fully concealsed PVC rigid conduit pipe heavy duty with ISI mark with suitable size PVC box (Fire Retarded Box) for 5 amps 5 pin plug socket point at Convenient Places.
12769.1) Supplying and fixing of 15 amps 3 pin flush type plug using (PVC Box, Fire Retarded Box)
12871.2) Supplying and fixing of 32 Amps triple pole main switch
12975.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep
13077.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.
13177.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed
13279.2.1) Supplying and fixing of 3 Nos. of 32 Amps Fuse Unit
13380.1) Supplying and fixing of 450x375x20mm T.W. plank
13485.1)Supplying of G.I pipe 40 mm dia, "B" class
13587.2)Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection (For AC Plug)
13690.2)Providing additional strutting to centering of plain surface
13799) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1800 x 2100mm
13899.1) T.W.single leaf Panelled door shutter with brass fittings Suitable for door of size a. 1200 x 2100mm
13999.2) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1500 x 2100mm
14099.3) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 2000 x 2800mm
141100) Supplying and fixing of 9 watts LED Bulb
142101) Supplying and fixing of 25 watts LED bulb with street light fittings
143102) Supplying and fixing of 4"18 watts crystalLED tube light fittings
144103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb
145104) Supplying and fixing of 12 watts LED bulb for bulk head fittings
146112.1) Supplying and fixing of Exhaust Fan 225mm dia
147114) Supplying and delivery of followingPVC Aluminium armoured LTUG cable a) 3.5 core 50 Sqmm PVC Aluminium armoured LTUG cable
148116) Labour charges for laying of 3.5 core 50 Sqmm PVC Aluminium armoured LTUG cable above ground level
149117) Supplying and fixing of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) Brass cable Gland for 3.5 core 50 Sqmm PVC Aluminium armoured LTUG cable
150117.1) Supplying and fixing of PVC cable end Termination (Crimping Lugs) suitable for following PVC Aluminium Armoured LTUG cable a) Cable end Termination (Crimping Lugs) for 3.5 core 50 Sqmm. Aluminium Armoured LTUG cable
151119.1) Supplying and delivery of 3 HP Electric Monoset centrifugal pumpset Duty -200 lpm x 35 m
152120.1) Labour charges for erection ofHorizontal shaft, Centrifugalpumpset upto 3 HP (coupled/monoblock)
153121.2) Supplying and delivery of three phase panel board of direct online starter with two level guard and auto start 3 HP
154122) Supplying and fixing of following dia GI, CI & GM specials a) 50mm dia GI Bend
155b) 50mm dia GI Union
156c) 50mm dia GI Hex Nipple
157d) 50mm dia CI Foot valve with stainer
158e) 50 mm dia GI Tee
159f) 50 mm dia GM Non-Return valve
160g) 50 mm dia GM Gate valve (Heavy duty)
161h) 25mm dia GM Gate valve (Heavy duty)
162124) Supplying and delivery of following dia GI pipes "B" class in position a) 65mm dia GI pipe
163b) 50mm dia GI pipe
164124.1) Labour charges for laying of following dia GI pipe below ground level a) 65mm dia GI pipe
165b) 50mm dia GI pipe
166125) Supplying and laying of 50mm dia PVC pipe/6 Kg/cm2 below ground level including labour charges
167129) Supplying and fixing in position of TamilNadu Police round logo emblem a) 45 cm size
168129.1) Supplying and fixing in position of Aluminium die casting TNPHC Logo emblem a) 60 cm size
169130) Supplying and fixing of Aluminium die casting letters and Numbers a) Aluminium letters / Numbers 12" size (30 cm)
170b) Aluminium letters / Numbers 9" size (23 cm)
171130.1) Supplying and fixing of Plastic name board of required size
172140) Supplying of3 to 10mm size HBS jelly etc.,
173142) Supplying of Rubber Moulded Hydraulic pressed Paver block 83mm thick
174142.1) Delivery of 83mm thick Paver block including conveyance charges andlabour charges for loading and unloading charges
175143) Labour charges for spreading and levelling of 3mm to 10mm size HBSJ and stone dust to the required thickness and compaction by the earth rammer and laying Paver block includingMachienry charges
176144) Supplying and fixing of CP Shower Arm with Overhead Shower Rose
177144.1) Supplying and fixing of concealed CP shower valve
178145) Supplying and fixing of 20mm dia CP flange
179146) Supplying and fixing of 20mm dia CP Nipple
180147) Supplying and fixing of CP Two Way Bib Cock with Health Faucet
181238.1) Anticorrosive treatment for window grills
182344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm
183361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick
184367) Providing wooden melamine polish for main door new wood work
185378.2)Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tkusing crushed stone sand
186379.7) Supplying and fixing of Granite slab of size 4" x 2" 18-20mm tk (Ruby Red / Raw silk) ) for Kitchen hearth slab in CM 1:3, 12mm tk using crushed stone sand a. In Ground Floor
187383.4.1) Supplying and fixing of stainless steel sink (Grade 304) of size 600 x 450mm x 200mm thick
188448.2) Supplying and fixing of PVC Tee with end cap of 32mm dia
189553) Supply and erection of 125 Amps capcity floor mounting / wall mounting Panel board (cubical type) with bus bar chamber
190554) Providing of Granular Sub base (GSB) using Grade I materials of table 400-1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by place method at OMC and compacting with vibratory Roller to achieve the desired density including all labour charges
191796)Two coat of Exterior emulsion paint including special primer (Primer O) for outer wall surfaces
192796.1)Two coat of Plastic emulsion paint including primer for inner wall surfaces
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail