Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-05-2023 | 1ST CORRIGENDUM | Other | 07-06-2023 |
| Sl. No. | Item Description |
| 1 | CIVILEarth work in excavation of foundation trenches in hard soil including dressing and leveling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of the EIC.(Foundation and Plinth)+(Compound Wall) |
| 2 | Cement concrete of proportion (1:3:6) in foundation using 4cm (1 ½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties & taxes of all materials with all labour, cess & T&P required for the work etc. complete in all respect.(Foundation and Plinth)+(Compound Wall) |
| 3 | Reinforced cemnet concrete of M-20 grade as per approved designs and drawing having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conduct in accordance with I.S 456 and I.S 516 using 12 mm to 20 mm. size black hard crusher broken granite chips (20 mm. size chips not to exceeds 25%) and screened and washed sharp sand for mortar of approved quality from approved quarry to be mixed in concrete mixture including hoisting,lowering, laying and compacting concrete by using vibrators, wateringand curring for 28 days, centering and shuttering then after dismantling and remoing debrish from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S rodsor Tor steel tying the grills and placing in proper position as directed by the Engineer in charge. (Foundation and Plinth)+(Compound Wall)A)Column Footing |
| 4 | B) Tie Beam +Grade Beam (Compound Wall) |
| 5 | C ) ColumnFoundation and Plinth +(Ground Floor)+ Column in Superstructure (Compound Wall) |
| 6 | D) Lintel (Ground Floor) |
| 7 | E) Sill Slab (Ground Floor) |
| 8 | F) Shelves & Platform(Ground Floor) |
| 9 | G) Chajja(Ground Floor) |
| 10 | H) Roof Slab (Ground Floor) |
| 11 | I) Staircase (Ground Floor) |
| 12 | J) Clolumn & Beam (Terrace Floor) |
| 13 | K) Roof Slab (flat)(Terrace Floor) |
| 14 | L) Roof Slab (Slopped) (Terrace Floor) |
| 15 | Cutting, Straightening coiled or bent up M.S. rods or Tor steel (Fe-500) SAIL make welding or jointing if necessary, bending, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and palcing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S rod/ Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost)(Foundation+Ground Floor+Compound Wall) |
| 16 | (Terrace Floor) |
| 17 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinthusing Fly Ash bricks of 25cmx12cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors(Foundation and Plinth+Compound Wall) |
| 18 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge(Foundation and Plinth) |
| 19 | Supplying and filling in foundation trenches and plinth with coarse river sand well watered and rammed in layers not exceeding 23 cm. in depth with all leads and lifts including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. (Foundation and Plinth+Compound Wall) |
| 20 | Providing antitermite treatment as per ISI specification including making holes 3\"0\" C/C both way oinject5ing cemical ewith water in propertion 1:20 etc complete n all respect as directed by the Engineer in charge. (Foundation and Plinth) |
| 21 | Fly Ash brick masonry in cement mortar (1:6) in Superstructureusing Fly Ash bricks of 23cmx11cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors.(Ground Floor) |
| 22 | Terrace Floor |
| 23 | Compound Wall |
| 24 | Fly Ash brick masonry in cement mortar (1:4) in Superstructureusing Fly Ash bricks of 25cmx12cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors.(Ground Floor) |
| 25 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect.(Ground Floor+Compound Wall) |
| 26 | (Terrace Floor) |
| 27 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and taxes of all materials with all labour, T&P required for the work etc. complete.(Ground Floor+Compound Wall) |
| 28 | (Terrace Floor) |
| 29 | 12mm (½”) thick cement plaster (1:4) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect.(Ground Floor) |
| 30 | (Terrace Floor) |
| 31 | 20mm (¾”) thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiseling the same and cleaning the surface by wire brushing laid to proper slope finished smooth to receive tarfelt treatment watering and curing including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect in all floors.(Terrace Floor) |
| 32 | Cement concrete of proportion (1:4:8) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect. (Ground Floor) |
| 33 | Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm coloured/ printed series of approved make of premium grade having thickness 8mm to 10mm conforming to IS-13756 on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects.(Ground Floor) |
| 34 | (Terrace Floor) |
| 35 | Supplying, fitting and fixing of Ceramic 20cmx30cm & 20cmx30cm wall titles of approved quality thick size fixed on 25mm thick C.M (1:3) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work.(Ground Floor) |
| 36 | Supplying, fitting and fixing chequred tiles of approved dimension as directed by Engineer-in-charge in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects.(Ground Floor) |
| 37 | providing, fitting and fixinggranite tilesarea above 0.10 sqm to 0.40 sqm to wall 20mm thick onmake glazed wall tiles having dimension 20cm x 30cm as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects .(Ground Floor) |
| 38 | Supplying, fitting, fixing of tile in dados of approved make using size vitrified tiles colour / printed series over 8mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.(Ground Floor)+(Terrace Floor) |
| 39 | Supplying, fitting, fixing of tile in dados of approved make using size Ceramic tiles colour / printed series over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.(Ground Floor) |
| 40 | Supplying, fitting, fixing of tile in dados of approved make using size Chequred tiles colour / printed series over 20mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.(Ground Floor) |
| 41 | Dressed and seasonedsal wood work for door frameincluding cost, conveyance and taxes of all materialswith all labour charges, T & P required for the work etc. completein all respect.(Ground Floor)+(Terrace Floor) |
| 42 | Providingand fixing 32mm (1¼”) thick piasal wood or local teak wood fully paneled shutters (mouldedpannels) complete with iron fittings and wooden hinged cleats etc. fixed in positions including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(Ground Floor)+ (Terrace Floor) |
| 43 | Providing and fixing of Exon board 30mm thick FRP frame with FRP Door shutters including cost of materials all taxes, labour, T&P etc. complete as per direction of Engineer-in-charge.(Ground Floor) |
| 44 | Supplying, fitting, fixing of window (sliding type) made of fully glazed Powder coated aluminum section 151-154, 151-55 as windows frame section No.151-155, 151-153 & 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes, labour, T&P etc. complete as per direction of Engineer-in-charge. (The required length of different aluminum sections are to be deposited with the Assistant Engineer in-charge of the work for quality testing and verification of weight for which no extra payment will be made).(Ground Floor)+(Terrace Floor) |
| 45 | Providing and fixing 5 mm thick black glass for windows shutters including cost of materials all taxes, labour, T&P etc. complete as per direction of Engineer-in-charge.(Ground Floor) |
| 46 | Supplying, fitting, fixing of aluminium ventilators made of fully glazed Powder coated aluminum section frameincluding locking arrangement including all fitting including cost of materials all taxes, labour, T&P etc. complete as per direction of Engineer-in-charge. (The required length of different aluminum sections are to be deposited with the Assistant Engineer in-charge of the work for quality testing and verification of weight for which no extra payment will be made).(Ground Floor) |
| 47 | Providing and fixing 5 mm thick forsted glass for louver ventilatorsincluding cost of materials all taxes, labour, T&P etc. complete as per direction of Engineer-in-charge.(Ground Floor) |
| 48 | Providing and fixing 6 mm thick wired glass forfixed windows/vantilator etcincluding cost of materials all taxes, labour, T&P etc. complete as per direction of Engineer-in-charge.(Ground Floor)+(Terrace Floor) |
| 49 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheetetc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. (Ground Floor)+(Terrace Floor)+Compound Wall |
| 50 | Painting 2 coats with any approved paint in iron works including sand papering, polishing surfaces, cost of paints, cost of all labour, T&P, etc complete in all floors as per direction of E.I.C.Compound Wall |
| 51 | Wall Painting Two coats with plastic emulsion paint of approved quality over a coat of primer tointerior wall surface including cost of paint, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.(Ground Floor) |
| 52 | (Terrace Floor) |
| 53 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.(Ground Floor) +Compound Wall |
| 54 | (Terrace Floor) |
| 55 | Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. (Ground Floor) |
| 56 | (Terrace Floor) |
| 57 | French polishing Two coat with french polish of approved quality shade and make to old wood work including cost of the French polish, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.(Ground Floor)+(Terrace Floor) |
| 58 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x32mm x2mm @ 0.90 C/C and stainless square pie barracking of size 32mmx32mm x 2mm 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance taxes of all materials labour, T & P etc.required for the complete in all reslpect(Ground Floor) |
| 59 | Supplying fittingand fixing 4\" PVC rain water downpipe with necessary bending shoes including all cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respectin all floors..(Ground Floor) |
| 60 | E.I WorkRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MSbox having FRLSHont bakelitecover of suitable size, MSbox with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge(Make of wire-Finolex/L&T/Havells/V-Guard/RR Cable/Polycab)Group-A |
| 61 | Group-B |
| 62 | Group-C |
| 63 | Pointwiring for 5A /6Amp socket outlet on existing board (Piano type/cover including connection etc. as required) with 2 X 1.5sq.mm FRLSH PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FRLSH PVC insulated single core multistrand copper conductor forloop earthing etc. as required(Make of wire-Finolex/L&T/Havells/V-Guard/RR Cable/Polycab) |
| 64 | Supply and fixing ofmetal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSH including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona/HPL) |
| 65 | Supplying and fixing including testing and commissioning of 6A Piano socket outlet with 6 Amp switch including providing GI box with face plate etc as required.(Make of switch & socket: Legrand(Arteor)/ Panasonic(Vision)/ Schneider(Zencelo)2 No 6 Amp 3-pin socket with 2 No 6 Amp switch. |
| 66 | S/F of computer board consisting 3 nos 5A /6Amp switch and 5A /6Amp socket outlet |
| 67 | Recessed wiring to submain in the following sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FRLSH PVC insulatedsingle core multistrand copper conductoras earth wire as required. (Make of wire-Finolex/L&T/Havells/V-Guard/RR Cable/Polycab)2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 68 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- |
| 69 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do-(for power plug) |
| 70 | 2 X 6 sq.mm +1 X 1.5 sq.mm -do-(for Floor DB) |
| 71 | Supply & Laying of 1.5 mm2 for inverter wiring |
| 72 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 73 | S/F of 10W LED Bulb including all connections and accessories.Make-Philips/Crompton/Bajaj category ISI marked as per direction Engineer-In-charge |
| 74 | S/F of tube light20 watt led with 2000lumen fitting with cover (Make-Havells/ Philips/Cromptonas per the direction of side engineer in charge. |
| 75 | Supply & Installation of Surface/Recess 15W LEDLight fitting (1500 Lumen) ofMake-Philips/Crompton/Bajaj category ISI marked as per direction Engineer-In-charge |
| 76 | S/F. of Ceiling fans 1400mm including all connections and accessories of Usha striker/Havells Pacer/Orient Summer Pride/Equivalent make. |
| 77 | Supply and fixing of Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj) |
| 78 | S/F of 300mm high speed exhaust fan with MS jally on outer side of wall (bajaj/hahells/CG) |
| 79 | S/F. of 45Wt. LED Street light fittings complete with G.I. bracket. Of Philips/Crompton/Bajaj category ISI marked as per direction Engineer-In-charge |
| 80 | Supplyingof . 1.5 Ton split type copper condensor A.Cmachine 3 star rated (Voltas/Carrier/Hitachi) |
| 81 | S/F of 4KVA stabilizer(V-guard,m-take) |
| 82 | S/F of 3pin 15A top for AC machine (Havells/ Anchor/ ligrand) |
| 83 | Supply of Steel Braket for fixing of olutdoor unit on wall |
| 84 | Supply of 3.5C core 25 mm2 Al.Armoured cable ISI maked.(Make-Havells/Polycab/Equivalent) |
| 85 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required. |
| 86 | Earthing.Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 87 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required |
| 88 | Supply, delivery and laying of 40mm HDPE pipe and cable inside the HDPE pipe as per construction standard specification and draning etc |
| 89 | S/F of 6way Double Door DB with(63A DP mcb-1no, 6-32A sp mcb -4nos ) (make for MCB & DB Schneider/Ligrand/L&T) as per direction of engineer-in-charge. |
| 90 | Floor Panel & Gym room:- Supply,installation,testing & commissioning ofdistribution control subpanel board wallmounted size 32\"x32\"x12\"made out of 16SWG cr sheet painted with one coat of gray enameled paint & two coat of red oxide paint with following arrangement. Incoming- 63A, 36KA, 4P MCCB-1no. Outgoing-.100A Cu busbar(insulated)- 1 set, 32A DP MCB- 6nos. Internal wiring with 6sqmm Cu wires, Indicating lamp(RYB)-1set(make-L&T/hager/HPL/ligrand) |
| 91 | P.H WorkProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C- PVC PipeGround Floor |
| 92 | 25mm dia C- PVC PipeGround Floor |
| 93 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.32mm dia PVC Pipe Ground Floor |
| 94 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 95 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 96 | 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) |
| 97 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 98 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 99 | WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR) |
| 100 | 25mm dia brassfull way valve (Shakti make) |
| 101 | 32mm dia brassfull way valve (Shakti make) |
| 102 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 103 | 15mm CP Extension piece |
| 104 | 125mm CP grating |
| 105 | 15mm size C.P. flange |
| 106 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 107 | 2000 liters capacityPVC water storage tank (roof on 1st floor)supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.Ground Floor |
| 108 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-chargeGround Floor |
| 109 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor |
| 110 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 111 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 112 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 113 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 114 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 115 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 116 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 117 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 118 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 119 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 120 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 121 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with \"p\" trap plain(Hindware/Parryware/Neycer make) |
| 122 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock .with pedestal |
| 123 | Halfpedestalbasin(560x450)Hindware No.91049+91115 |
| 124 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 125 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 126 | Towel ring |
| 127 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP/NP guard rails. |
| 128 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type) |
| 129 | Large Size mirror with Frame (2x0.90x0.75)= 1.35 |
| 130 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 131 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½” x 5” CP Shower (Plaza Deluxe Make) |
| 132 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 133 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 134 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 135 | Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge |
| 136 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 137 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor |
| 138 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed seriesto be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cmGround Floor |
| 139 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.Ground Floor |
| 140 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cmGround Floor |
| 141 | Granite Tiles - 10mm thick |
| 142 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 143 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge |
| 144 | Supplying all materials, labour, T&P and providing brick work in super structure with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 145 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge110mm dia P.V.C. pipe |
| 146 | 160mm dia P.V.C. pipe |
| 147 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 148 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 149 | 1 no 30 Users Septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge. |
| 150 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 151 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 152 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 153 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 154 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 155 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 156 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 157 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 158 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 159 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 160 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 161 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
