|
| 1 | Earth work excavation in sand silit (or) other loose soil, wet sand sandy loam including excavated earth with initial lead and lift of 1m and 2m respectively etc., complete as per standard specification. |
| 2 | For coloumn |
| 3 | For Grade beam |
| 4 | Supplying and filling in foundation and basement with Stone Dust in layers of not more than 15cm thick well rammed, watered and consolidated etc., complete complying with standard specification. |
| 5 | Cement Concrete 1:4:8 (One Cement, Four sand andeight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 6 | Brick work in Cement Mortar 1:5 Mix using country Bricks of size 8¾ x 4¼ x 2¾ including cost of bricks and conveyance and including all labour charges and all other incidential charges etc., completed as per standard specifications. |
| 7 | For Foundation and Basement |
| 8 | For Ground floor |
| 9 | Supplying and fabricating in position ofMS or RTS rodsfor RCC work including the costof steel and binding wire and all labour charges for cutting bending tying grill and stengthening and all labour chrges including the fabeication charges etc complete. |
| 10 | Suppying and erecting shuittering including necessary supports for plane surface in foundation and basement for RCC roof slabbeams , column footing, plinth beam, grade beam, criical piers, sill slabs, steps, etc using suitable mild steel sheets of B. G. 10 stiffened with welded suitable mild steel angles for boardings supported by casuarina props 10cm to 13cm dia spaced at suitable intervals etc complete as directed by thr deopartmental officetrs complying with standard specifications. |
| 11 | For coloumn |
| 12 | For Roof slab,lintel,beam etc., |
| 13 | Reinfocedcement concrte 1:1.5:3 mix ( one cement One and half sand and three aggregate ) including the cost and conveyance of all materials and excluding the cost of steel and including thelabour charges for mixing, laying of concrete and curing etc complete as per the standard specifications. |
| 14 | For Foundation and Basement |
| 15 | For Ground floor |
| 16 | Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick, in all floors etc., complete complying with standard specification, |
| 17 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers. |
| 18 | Manufacturing supply and fixing of steel doors with following specification. MS angles of size 40x40x6mm at 3.5kg/m used for the outer frame and MS angles of size 35x35x5mm at 2.60kg/m for the outer frames. Stiffners with 32x6mm at 1.5kg.m MS flat is provided at the lock rail of the door and welded intact on both sides to the shutter frame, 18gauge CR sheets of best quality is laid as panel in the shutter frames, 18x5mm at 0.70kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS flat on the rear side of the doors and welding the CR sheet for rigidly. Additional stiffners with 18x5mm at 0.7kg/m MS flat are provided diagonallyetc., complete as per standard specification |
| 19 | Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). |
| 20 | Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality synthetic enamel paint approved colour over the existing red oxide priming coating all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with std charges etc., complete complying with standard specification. (Paints should be got approved by the Executive Engineer before use on work). |
| 21 | Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 22 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer |
| 23 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 24 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23 |
| 25 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38 |
| 26 | Supply and fixing of Havells/Philips / CromptonFusion - II - Metallic Matt 1200 MM(48\") AC ceiling fan complete with 300mm down rod on the existing clamp.[Data-M] SD-107 |
| 27 | Supply and fixing of single box type 28W T5flu fitting Philips MIROLTA Slim T5 TMS540 HF 1xTL5-28W/Havells / Crompton makecomplete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.[ Data- J] SD -87 |
| 28 | Drilling of 150 mm dia vertical bore wellin hard rock area includingdrillingcharges and including injectionof casing pipein the drilledhole etc complete (Page No:219) |
| 29 | Supply and delivery of 160 mm dia PVC causing pipe6KSC/CM2 including cost of pipe ea complete |
| 30 | Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete(165 mm/168 mm dia PVC Casing pipes Assembly) |
| 31 | Conveyance of Hand Pumps and its accessories from divisional stores to site of works Conveyance upto 10 Kms |
| 32 | Erection of deep well hand pumps upto 40 m |
| 33 | GST. 18%(CGST-9%,SGST-9%) |
