Sitc Of Approved Make Occupancy Sensor To The False Supply, Installation, Testing And Commissioning ( Sitc ) Of Approved Make Occupancy Sensor To The False Ceiling In The Cabin With Required Hardware. Rate Shall Include For Sitc Of Approved Make 3 Nos. 2.5 Sq Mm Copper Conductor Pvc Frlsh Insulated Wire 2 2 Primary Point Sitc Of Approved Make 3 Nos. 2.5 Sq Mm Copper Conductor Pvc Frlsh Insulated Wire 3 3 Secondary Point Supply, Installation, Testing And Commissioning ( Sitc ) Of Approved Make 3 Nos. 2.5 Sq Mm Copper Conductor Pvc Frlsh Insulated Wire 4 4 Lighting And Raw Power Mcbdb Supply, Installation, Testing And Commissioning Of Approved Make 3 Phase, 8- Way Per Phase Isolation Double Door Metallic Mcbdb With Per Phase Isolation Kit Using Required Hardwares 5 5 Sitc Of Approved Make 4 By 16 Sqmm Copper Conductor Supply, Installation, Testing And Commissioning Of Approved Make 4C X 16 Sq Mm Copper Conductor Xlpe Frls Insulated 1100-Volt Armoured Cable And 2 Runs Of 8 Swg Gi Earth Wire With Required Support From Ceiling 6 6 Termination Of Above Cable Using Required Size Brass Cable Gland Termination Of Above Cable Using Required Size Brass Cable Gland With Nickel Plated And Required Size & Type Copper Lugs Preferably Insulated. Rate Shall Include For Termination Of Both Gi Wire At Two Separate Points. 7 7 Supply And Installation Of Gi Perforated Cable Tray Supply And Installation Of Gi Perforated Cable Tray Of Minimum 18 Swg Thick, 100 Mm Width And 25 Mm Height; True Ceiling Support With Minimum 10 Mm Size Gi Rod 8 8 Supply And Installation Of Gi Perforated Cable Tray Of Minimum 18 Swg Thick Supply And Installation Of Gi Perforated Cable Tray Of Minimum 18 Swg Thick, 150 Mm Width And 25 Mm Height; True Ceiling Support With Minimum 10 Mm Size Gi Rod, Nut, Washers, Anchor Fasteners And 18 Swg Gi C Channel For Support To Cable Tray At Required Interval As Per Site Condition. Rate Shall Include For Any Other Material Required For Completion Of This Work. 9 9 Supply And Installation Of Approved Make 2C By 1.5 Sq Mm Supply And Installation Of Approved Make 2C X 1.5 Sq Mm Copper Conductor Pvc Insulated Fire Alarm Armoured Cable With Required Support From Ceiling. 10 10 Assembly, Installation, Testing And Commissioning Of Track Light Assembly, Installation, Testing And Commissioning Of Track Light Fittings Supplied By Bank. 11 11 Installation, Testing And Commissioning Of Led Downlighter Installation, Testing And Commissioning Of Led Downlighter Supplied By Bank. Rate Shall Include For Providing Marking To False Ceiling. 12 12 Installation, Testing And Commissioning Of 2 X 2 Led Installation, Testing And Commissioning Of 2 X 2 Led Panel Supplied By Bank. To Grid Type False Ceiling. 13 13 Installation, Testing And Commissioning Of Hanging Light Installation, Testing And Commissioning Of Hanging Light Fitting Supplied By Bank. 14 14 Profile Light Fitting Installation, Testing And Commissioning Of Profile Light Fitting Supplied By Bank. 15 15 Sitcof Approved Make 6 Module Flush Mounted Aluminium Factory Finish Popup Box Supply, Installation, Testing And Commissioning Of Approved Make 6 Module Flush Mounted Aluminium Factory Finish Popup Box With Back Protecting Cover On Workstation / Side Table In The Cabin And Suitable Size Plastic White Plates With Frame 16 16 Power Plug Point Supply, Installation, Testing And Commissioning Of Power Plug Point Using Approved Make And Model Suitable Size Plastic White Plates With Frame, 16 Amp Led Indicator Switch 17 17 Group Of Two Light Plug Point Supply, Installation, Testing And Commissioning Of Group Of Two Light Plug Point Using Approved Make And Model Suitable Size Plastic White Plates With Frame, Minimum 6 Amp Switch Qty 02 Nos 18 18 Ups Supply Mcbdb Supply, Installation, Testing And Commissioning Of Approved Make 12- Way Spn Double Door Metallic Mcbdb Using Required Hardwares In Concealed Manner By Making Opening In Wall And Refilling The Area Surrounding To It By Mortar 19 19 Air Conditioning Power Supply Mcbdb Supply, Installation, Testing And Commissioning Of Approved Make Three Phase, 4- Way Per Phase Isolation Double Door Metallic Mcbdb 20 20 Sitc Of Approved Make 4C X 4 Sq Mm Supply, Installation, Testing And Commissioning Of Approved Make 4C X 4 Sq Mm Copper Conductor Xlpe Frls Insulated 1100-Volt Armoured Cable And 2 Runs Of 8 Swg Gi Earth 21 21 Sitc Of Approved Make 3C X 2.5 Sq Mm Supply, Installation, Testing And Commissioning Of Approved Make 3C X 2.5 Sq Mm Copper Conductor Xlpe Frls Insulated 1100-Volt Armoured Cable And 12 Swg Gi Earth Wire On Wall Using Heavy Duty Gi Saddles 22 22 Termination Of Above Cable Using Required Size Brass Cable Gland Termination Of Above Cable Using Required Size Brass Cable Gland With Nickel Plated And Required Size & Type Copper Lugs Preferably Insulated. 23 23 Plug Point For Ac Supply, Installation, Testing And Commissioning Of Approved Make Single Phase 20 Amp Metal Clad Dpmcb, Plug, Socket Box, In Flush / Surface Manner As Per Site Condition And 20 Amp Dpmcb, 20 Amp Metal Clad Top. 24 24 Ups Power Dpmcb In Ms Enclosure Supply, Installation, Testing And Commissioning Of Approved Make 16 Amp Dpmcb And Required Size Metal Enclosure In Flush / Surface Manner As Per Site Condition 25 25 Telephone Point Supply, Installation, Testing And Commissioning Of Approved Make 2 Pair 0.5 Mm Dia Copper Conductor Pvc Insulated And Sheathed Urarmoured Telephone Cable From Mdf To Each Cabin 26 26 Network Point Supply, Installation, Testing And Commissioning Of Approved Make Utp Cat 6 Cable From Network Switch To Io Point Of Each Cabin 27 27 Call Bell Point Supply, Installation, Testing And Commissioning Of Approved Make And Model Plastic White Plate 28 28 Telephone Mdf Supply, Installation, Testing And Commissioning Of 100 Pair Powder Coated Mdf With 10 Nos 10 Pair Krone Module, Stainless Steel Krone Module Stand In Flushed Manner With Required Mortar Etc 29 29 Carefully Removing Of All Mcbdbs Carefully Removing Of All Mcbdbs, Cables, Wires, Telephone Mdfs, If Any On The Floor As Directed By Bank?S Engineer And As Per Site Conditions.
