Public Works Department-PWD has published Tender For Upgradation Of Entrance Of Kashmir House Raja Ji Marg And Area Around Newly Built Porta Cabin Structures By Way Of Earthwork, Concreting, Granite Work, Kerb Stones And Paver Block Along With Other Allied Works At Kashmir House Raja Ji Marg. Submission Date for this Tender is 02-06-2023. Building Work Tenders in New Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars |
| 7 | Providing and fixing PVC pipe embedded in 1: 5: 10 inclu. fittings, trenching and refilling and making good the floor/wall complete job. |
| 8 | 200mm dia. Nominal bore medium |
| 9 | 150mm dia. Nominal bore medium |
| 10 | Providing and fixing PVC pipes including all fittings .supreme , prakash or equivalent(external work) 110mm nominal bore (medium) |
| 11 | Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. |
| 12 | 180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 13 | 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 14 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) |
| 15 | 25 mm dia. nominal bore- medium With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 16 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete |
| 17 | 50 to 80 mm nominal bore |
| 18 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. - Welded |
| 19 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 20 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in - Charge. 18 mm thick |
| 21 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite Work |
| 22 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 23 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 24 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerbedging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 25 | Laying old cement concrete interlocking paver blocks of any design / shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. |
| 26 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 27 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 29 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 30 | Raising manhole cover and frame slab to required level incl. dismantling existing slab and making good the damage as required(Raising depth of manhole to be paid separately). Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD -10 |
| 31 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 32 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
| 33 | Dismantling of 2Nos. existing structures manually/mechanically of approximate plinth area 58"*14" and height 10" including by way of dismantling partial iron/steel girder roof slab work (1.5-ftthickness), CC work, RCC work, brick work, tile work; dismantling and taking out sanitary fittings and fixtures, GI/AC sheets, reinforcements, taking out servicable/unservicable doors and windows complete job including taking out of mortar from bricks, straightening of reinforcement bars etc. Also disposal and stacking of servicable/unservicable mulba with in 50 mtrs. lead at site. |
| 34 | Removal of waste/mulba by mechanical means and disposal of the same beyond municipal limits |
| 35 | Carriage charges of materials by mechanical transport complete |
| 36 | Sand/ Agg (37km) |
| 37 | Bricks (38km) |
| 38 | Polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank terrace (at all floor levels). |
| 39 | Providing and fixing of sanitary fittings , fixtures complete job. |
| 40 | Health faucet (Parryware/equivalent) |
| 41 | Toilet paper holder |
| 42 | Jet (Parryware/equivalent) |
| 43 | Towel ring |
| 44 | Soap dish |
| 45 | Towel rod 2" |
| 46 | Providing and fixing of hardware fittings ,complete job. |
| 47 | Godrej Door lock |
| 48 | Door closer (Hardwyn, Godrej) |
| 49 | Almirah lock (Godrej) |
| 50 | Cylindrical lock |
| 51 | Mirror with frame |
| 52 | Corner glass shelf |
| 53 | Toughened glass for tables/furniture etc. |
| 54 | Door eye |
| 55 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 56 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 57 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 58 | 1mm thick |
| 59 | 2mm thick |
| 60 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
