Military Engineer Services-MES has published Tender For Repair / Maintenance Of B / R Works In Building Of Group Ii Units / Locat Rms Under Age B / R-I. Submission Date for this Tender is 10-06-2023. Building Work Tenders in Shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Jun-2023 | AMENDMENT IN BOQ FOR REPAIR MAINT OF BR WORKS IN BLDGS OF GROUP II UNITS LOC AT RMS UNDER AGE BR I | BOQ | 10-06-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 2 | Dismantling asbestos cement (Corrugated or semicorrugated) sheets in roof covering. |
| 3 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 4 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified . |
| 5 | M & L for roof treatment of roof of bldg/stair Case/tank Portion including the following :- (i) Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. (ii) M & L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in top of roof. (iii) Screed bed or bedding layer or mortar 15mm thick layer of cement mortar 1:4for laying floor finishes. (iv) Add to items if rendering is to be finished even and smooth in 1:4(without using extra lime or cement) (v) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces. (vi)APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric laid on primed surface by forced application complete all as specified |
| 6 | Refixing of asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified |
| 7 | S & F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws |
| 8 | S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws as specified |
| 9 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 10 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mmduly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified. |
| 11 | S&F for4 mm thick veneered decorative Plywood (no of ply 05),grade-I (with BWRresin) with decorative face veneers on one face, fixedwith screws to timber frame work complete all as specified and directed. |
| 12 | M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm. |
| 13 | M&L for preparation of newwooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pint wood primer. in tint as directed. |
| 14 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed. |
| 15 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level. |
| 16 | M & L for cement concretetype C-2,1:3:6(40mmgraded stone aggregates) as in surface channels and drains |
| 17 | M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement |
| 18 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing. |
| 19 | S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement |
| 20 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match all as specified. |
| 21 | All as per item No 20 here-in-before but in skirting. |
| 22 | S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement |
| 23 | All as per item No 22 hereinbefore butin skirting including 10mm thick plastering for backing coat in cement mortar 1:4 |
| 24 | M&L forceramic colouredprinted tiles of size 300x200mmx7 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured and including 10mm thick CM (1:4) backing coat. |
| 25 | M&L for coloured glazed ceramic tiles in vertical surface 350x250x 7mm/ 450mmX350mmx 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick CM (1:4) backing coat complete all as specified and directed. |
| 26 | Demolitionof brick work including allquoins arches pillars etc built in cement mortar. |
| 27 | M&L for brick work in cement mortar (1:6) using sub class "B" bricks straight or curved on plan exc 6.0 m mean raidus |
| 28 | M&L for brick work with sub class "B" bricks straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed |
| 29 | Demolition of reed lathing single or double including battens and plaster or chicken wire lathing. |
| 30 | M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement. |
| 31 | M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement. |
| 32 | Taking down cement plaster on walls built in cement mortaretc including racking out joints, hacking for key, scrubbing down with water etc. |
| 33 | M&L for 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even,complete all as specified and directed. |
| 34 | M&L for 15mm thick cement plastering in cement mortar 1:6 brick or concrete surfaces of wall finished fair and even with out using extra cement complete all as specified and directed. |
| 35 | M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of 3mm thick wall care putty incl preparation of surface complete all as specified and directed |
| 36 | Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over one coat of primer complete all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge . |
| 37 | Preparation of new plasteredsurfaces of walls and applying three coat wash completeall as specified and directed. |
| 38 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc |
| 39 | M&L for PCC 1:3:6 type C2 (40mm graded stone agg) 75mm thick |
| 40 | M&L 75 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection, using extra cement for smooth finishing. |
| 41 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position. |
| 42 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames). |
| 43 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each. |
| 44 | Taking down shutters of any description not exceeding 1 Sqm each. |
| 45 | M&L for preparing surface of wood and wood based matreials, new or old, of any description and girth and treaed with tar or coal tar black paint and sanding newly tarred surfaces with clean sharp sand. |
| 46 | S&F Post, joist, channel, angle or tee section fixed independently without connection plates etc conforming to Fe-410- W (Gde-E-250) quality A |
| 47 | M&L for second class hardwood as in scantlings clean sawn timberfixed. |
| 48 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW. |
| 49 | Refixing of Shutter of any description exc 1 sqm and n exc 2 sqm each |
| 50 | S&F factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 51 | S&F for second class hardwood 35 mm thick plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated. |
| 52 | S&F for second class hardwood glazed and skeleton door shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats. |
| 53 | S&F for second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats. |
| 54 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening. |
| 55 | S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site. |
| 56 | S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 57 | S&F for anodised aluminium powder coated any colour window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 58 | S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc.complete all as specified. |
| 59 | S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane. |
| 60 | Hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ putty. |
| 61 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane. |
| 62 | S&Ffor galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples. |
| 63 | S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples. |
| 64 | M&L for prelaminated particle board 12mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in pelmet boxes or in narrow widths not exceeding 15 cm each, rebated or flat edged including 6mm thick teak wood lipping allround. |
| 65 | S&F Butt hinges, medium weight, cold rolled mild steel,75mm size. |
| 66 | S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size. |
| 67 | S&F 300mm ordinary mild steel rat tail rod patttern springs includding roller and roller plate complete. |
| 68 | S&F Aluminium, anodised, barrel tower bolt 200mm longof extruded section and fixed complete. |
| 69 | S&F Aluminium, anodised, barrel tower bolt 150mm longof extruded section and fixed complete. |
| 70 | S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed. |
| 71 | S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size. |
| 72 | S&F in repairs/new Mortice lock,vertical type Brass 2 levers, size 100 mm |
| 73 | S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size. |
| 74 | S&F Harrison rails, 20mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc. fixed in repairs. |
| 75 | S&F in repair/new for aluminium (extruded section) bodydoor closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 76 | S&F in repair/new floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 77 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats. |
| 78 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 79 | M & L for preparation of newly untreated steel surfacesof any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primercomplete all as specified and directed. |
| 80 | S&F in repair 15mm borebib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule. |
| 81 | S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 82 | S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) |
| 83 | S&F in repairs corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed. |
| 84 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed. |
| 85 | S&F in repairs 600x450 mm size of 5.5mm thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 86 | S&F in repairs for 15mm dia of pipe Anglevalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed . |
| 87 | S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket |
| 88 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed |
| 89 | S & F in repairs Vitreous China Urinal, full stall type, white incl urinal spreader(excluding flushing cistern, flush pipe and waste pipe |
| 90 | Taking down PVC/AC/Salt glazed warepipes and fittings upto 110mm. |
| 91 | S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor |
| 92 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor |
| 93 | S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall |
| 94 | S&F of 110mm dia PVC (SWR) bends |
| 95 | S&F 75mm PVC(SWR) bends any radius with access door. |
| 96 | S&F of 75 mm dia PVC (SWR) Vent cowl |
| 97 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 98 | S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof |
| 99 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing. |
| 100 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing. |
| 101 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore. |
| 102 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore. |
| 103 | S & F waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed. |
| 104 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed. |
| 105 | S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair,complete all as specified and directed. |
| 106 | Supply and fixing in repairs vitreous china squattingpan water closet,Orrisa pattern of size 580mmx440mm white with integral foot rests excluding flushing cistertn and flush pipe. |
| 107 | S&F in repairs CP wall mixer (3 in 1) complete all as specified and direcated and as approved by GE. |
| 108 | S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed. |
| 109 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 110 | S&F in repair 15mm diapillar tap cast copper alloy chromium plated fancy type(ISI Marked) |
| 111 | S & F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, asfixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star). |
| 112 | S & F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165complete all as specified |
| 113 | S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair,complete all as specified anddirected. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
