|
| 1 | Name of the Work : Construction of Nurse Station Cabin and Labour Room and Postnatal Ward 10 beds, Toilets in PHC Olapalayam at Vettamangalam |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as 1 may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete |
| 3 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stane jelly) using40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 4 | Collection and supply of gritty gravel from appd quarry including cost and conveyance of allmaterials to site including all labour charges for filling etc.complete, |
| 5 | Brick work using country bricks of size 83/4\"x41/4\"x23/4\" in cement mortar 1:5 (Onecement and five M.Sand) including curing neat finishing, etc., complete complying withstandard specifiction. |
| 6 | Supplying and erecting centering for sides and soffits including supports and strutting upto 3.29m. Ht for plain surfaces including struting etc., complete |
| 7 | Supplying and erecting steel centering forRound Column |
| 8 | AGL (Column Toilet & Column Postnatal & Labour RoomLintel (Postnatal Ward, Lbour Room, Window Sunshade, MD Bottom, Door Bottom, Door 1 Bottom Toilet, Windows Bottom, Ventilator Bottom |
| 9 | Roof Beam Postnatal ward, Roof Beam Postnatal Ward Outer, Tee Beam, Labour Room, Labour Room Outer, Tee Beam, Portico, Portico Outer, Roof Slab Toilet, Postnatal Ward, Labour Room, Portico & Spetic Tank |
| 10 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC worksas per the design given including cost of steel and binding wire also in all figors etc., complete |
| 11 | Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M. Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 12 | Plastering with cement Morter 1:5 12mm thick in all floors including curing etc., complete complying with standard specification and as directed.rials and labour charges etc., |
| 13 | Special celling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 13 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, |
| 14 | Plastering with cement mortar 14mix to 20 mm thick includingcost and conveyance of all materials to site and all labour |
| 15 | Paving the floor with best quality Vetrified Tiles of size 600 x 600 mm of approved colour, shade and quality laid in cement mortar 13 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mised same colour pigments etc, complete complying with standard specification. (The make and brand of the tiles |
| 16 | White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc |
| 17 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M. Sand) base mortar over the existing slab, floor including cutting the tiles to the required size with special cutter wherever necessary. laying in position and painting with white cement mixed with colouring pigment at the rate of 0.3 kg/sq.m. etc., complete complying with standard specification. (The make andbrand of the tiles should be got approved by Executive Engineer before use on works) |
| 18 | Dadooing walls with following best approved quality, white colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M. Sandi 1410mm thick and pointing the joints with white cement mixed with colouring pigments ar the rate of 0.40 Kg/sqm, neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers |
| 19 | Distembering two coats with best approved distember including cost and conveyance of all materials and and all labour charges etc complete. |
| 20 | Painting two coats of approved Exterior emulsion paint over one priming coat of old wall surface including cleaning preparing the surface and curing etc complete |
| 21 | Painting two coats of new iron works such as steel doors, Window, Ventilators, Window bars Balustrdes etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coat etc, complete complying with standard specifications etc., |
| 22 | Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm MS flat is provided at required intervals in the shutter frame. 18-gauge CR sheet laid as panel in the shutter and welded intact. M5 flat 185mm is welded over the 32 x 6mm M.S. flat M.Sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos of hinges in case of single leaf and 6nos: of hinges in double leaves shutter |
| 23 | Manufacturing supplying and fixing in position of steel windows with the following specifications Outer frames of windows made of \" section F70 of size 33 x 25 x 3mm at 1.419kg/m and mullion section (48) of size 46 x 25 x 3mm at 2.28kg/m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419kg/m as specified in 15 7452/1990. ach openable shutter should not exceed a width of 600mm to enable separate operations and easy maintanenance. The panel of the shutters to be covered with 18 gauge cold rolled |
| 24 | Supply of Following materials For Water Supply 32mm Pipe 10 Ksc |
| 25 | Supply of Following materials For Water Supply 20mm Waste Not tap |
| 26 | Europeon Water Closet with all fittings and 10ft capacity flusing tank |
| 27 | Supply and delivery and fixing of HDPE tank as per 15 12701/1996 including loading unloading, transportation and labour charges for fixing of the Gi pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 28 | Supplying and fixing in position best quality and approved make Indian made white colour glazed earthenware wash hand basin of size 550 x 400mm (with pedestal/without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap. 32mm dia \"B\" class Gl waste pipe with rubber plug and chain, 15mm dia GM wheel valv |
| 29 | Provision for PVC 110mm dia Rain Water down fall Pipe |
| 30 | Supply and fixing of Electrical Arrangements |
| 31 | a) Light & Fan point SD 25 |
| 32 | b) Plug Point 50 38 |
| 33 | c) Light fittings 4 18W Crystal Glass LED Tube Light Fitting |
| 34 | e)Fan Fitting SD 112 |
| 35 | f)Service wire SD 65 |
| 36 | GST Amount for providing Service to Government Contract Works for the above ConstructionWorks.GST Amount is the Total GST Amount for overall quoted amount above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
