|
| 1 | A-1 CIVIL WORKS:- |
| 2 | Scraping(c) Cement plaster |
| 3 | 12.5 mm thick cement plaster 1:5 |
| 4 | 20mm thick cement plaster 1:5 in two coat work |
| 5 | 12.5 mm thick cement plaster 1:4 |
| 6 | 20mm thick cement plaster 1:4 in two coat work |
| 7 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wallputty by applying two or more coats to get required finish |
| 8 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled(a) Doors of area 3 sqm and below. |
| 9 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantledb) Windows of area 3 sqm and below |
| 10 | Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer\"s specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. |
| 11 | Providing and fixing of 30mm thick factory made Polyvinyl Chloride (PVC) door shutter (without chowkhat) made of styles and rails of a UPVC Plug profile section of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative molding edging on one side. The styles and rails with plastic brackets of size 75x220mm meter and welded at the corners. The- stiles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC Plug profile section of size 30mm x 100mm and 2mm±0.2mm wall thickness welded to the shutter style with a UPVC Plug profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm±0.1 mm wall thickness with 20 mm panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver frame of suitable size, as per manufactures specification and direction of Engineeringcharge. (For WC and bathroom door Shutter) |
| 12 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973(a) Commercial with elm or gurjan facing on both \ Sides withlaminated core and lipped edges:-(iv) 35mm thick |
| 13 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 14 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete(c) I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 15 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc.ii) For shutter area above 0.50 sqm |
| 16 | Supplying and fixing of GI sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-chargec) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. |
| 17 | Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary ironhandles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as perspecification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as perrespective items) |
| 18 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of boltsand nuts, screws, welding rod complete fixing in position |
| 19 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.(b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area |
| 20 | Renewing glass panes with putty and nails wherever necessary(b) Glass panes weighing 10.75 Kg/sqm |
| 21 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 22 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (New Door and Windows) |
| 23 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. (old Door) |
| 24 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 25 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 26 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction ofEngineer-in- charge. |
| 27 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.a UPVC 110 mm bend |
| 28 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on olddistempered surface |
| 29 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 30 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over andincluding base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 31 | B) Public Health Work |
| 32 | B-1 ) Sanitary Installations |
| 33 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.(e) PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut |
| 34 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.. |
| 35 | Providing and fixing in position C.P. brass soap dish of approved make (tothe approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 36 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. |
| 37 | i) C.P. brass Bib cock long nose/ long body foam flow withoutflange |
| 38 | ii) C.P. brass Bib cock foam flow without flange |
| 39 | Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 40 | a) Laboratory cock swan neck One Way |
| 41 | Providing and fixing in position paperholders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.(b) CP BRASStoilet paper holder |
| 42 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 43 | b) C.P.brass 15mm Concealed stop cock with flange. |
| 44 | c) C.P.brass 15mm Angle valve without flange |
| 45 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 46 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. i) C.P. Brass extension piece, 25mm long to 50mm long |
| 47 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)(a) Size 600mmx450mm |
| 48 | Providing and fixing in position automatic brass Ball Cock in tanks.25mm i/dB Brass Ball Cock with rod and Plastic Ball |
| 49 | Providing and fixing in position automatic brass Ball Cock in tanks.40mm i/dB Brass Ball Cock with rod and Plastic Ball |
| 50 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P brass towel ring |
| 51 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete inall respect. |
| 52 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.25mm i/d Brass Ball valves |
| 53 | B-2) Internal Water Supply & Sewerage |
| 54 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type B |
| 55 | a) 160mm o/d SWR UPVC pipe lines laid complete |
| 56 | b) 110mm o/d SWR UPVC pipe lines laid complete |
| 57 | c) 90mm o/d SWR UPVC pipe line laid complete |
| 58 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.qty as per Table Atached a) For 110mm o/d pipes |
| 59 | vi) Vent Cowls |
| 60 | viii) Coupler |
| 61 | ix) P Trap/Floor Trap 110mm x 110mm |
| 62 | vii) Reducer 110mm x 75mm |
| 63 | b) For 90mm o/d pipes |
| 64 | viii) Coupler (Description Changed) |
| 65 | vi) Vent Cowls |
| 66 | Exposed on Wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.e) CPVC SDR 11 Pipe & fitting 40mm o/d |
| 67 | B-3) Water Cooler |
| 68 | Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.Water Cooler Semi Steel Body 40/80 ltr Capacity without Stablizer |
| 69 | AUTOMATIC VOLTAGE STABLIZER:Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:- |
| 70 | Automatic Voltage Stablizer 2 KVA |
| 71 | Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect. |
| 72 | Supply and Erection of Heavy Duty Exhaust Fan (HDEF ) (300mm-900RPM) Single Phase Of make Crompton Model EXHD300-6-1 or its Equivalent Make Havells turbo Force SP/Orient (12\" H.D. EX ) ISI Marked Heavy Duty Motor With die Cast Aluminium Motor Mounted On Two Ball Bearing including Erection, Connections and louver ShutterComplete In all Respects |
| 73 | Provision Of 1 HP Tullu Pump Complete in all Respect |
| 74 | C-1) Electrical Services |
| 75 | REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01:Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point)and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01) |
| 76 | i) a Wiring fan point (Without fan box) |
| 77 | (ii) Wiring light point |
| 78 | (iv) Wiring 6Amp. wall socket point |
| 79 | (v) Wiring 6Amp. Plug control comprising wall socket point |
| 80 | (vi) Wiring 16/20Amp. power plug control point |
| 81 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100voltsgradeconfirmto IS:694/1990 left bare inpipe or casing of suitablesizecompleteinallrespectas desired by the Engineer-in-charge:- |
| 82 | i) Overall size 1sq.mm (Un-sheathed) |
| 83 | ii) Overall size 1.5sq.mm (Un-sheathed) |
| 84 | iii) Overall size 2.5 sq.mm (Un-sheathed) |
| 85 | iv) Overall size 4sq.mm (Un-sheathed) |
| 86 | v) Overall size 6sq.mm (Un-sheathed) |
| 87 | vi) Overall size 10sq.mm (Un-sheathed) |
| 88 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply& erectionofPVCConduitPipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995forwiringpurposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materialsetc., as per PWD GeneralSpecifications:- |
| 89 | ii) Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 90 | iv) Heavy Gauge PVC Conduit Pipe 40mm dia. (On Surface) |
| 91 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- |
| 92 | (xi) 6/10amp. One Way Modular Switch (One Module) |
| 93 | (xiii) 16/20amp. One Way Modular Switch with Indicator (One Module) |
| 94 | (xv) 6amp. 2/3 Universal Modular Shuttered Socket (two Module) |
| 95 | xvi) 16/20amp. Universal Modular Shuttered Socket (two Module) |
| 96 | (xix) Step type Modular Electronic Fan Regulator 100watts (Two Module) |
| 97 | (xxv) Modular Blanking Plate (One Module) |
| 98 | (xxvi) Ceiling Rose (Flush Piano type) |
| 99 | (xxvii) Bakelite Batten Holder (Large size) |
| 100 | MINIATURE CIRCUIT BREAKERS:SupplyanderectionofMiniatureCircuit BreakerMCB\"sforcircuitprotection against overload and short circuit currentfaultsuitablefor240/415volts 50cycles AC supply with breaking capacityof10kA,Curve-Candlowwatt losses as per IS/IEC 60898-1, energy limitationclass-3,truecontact indication, label holder facility in the existingMCBdistributionboardasper PWD General Specificationsincluding connections with suitable size ofthimbles/lugs:- |
| 101 | ii) MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 102 | vii) MCB Double Pole 40amp. (10kA, Curve-C) |
| 103 | xvi) MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 104 | S/E of Ceiling Fans48 \"(1200mm sweep)having double ball bearing but without regulator including flexible wire and petty material etc.complete with erection, connections and testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. |
| 105 | Supply and erection of LED batten 40watt LED (including LED driver) withHigh quality extruded aluminium with efficacy of LED fixturewith erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.CD). The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical) , Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. |
| 106 | Supply and erection of 12\" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single PhaseISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and Aluminium louver shutter complete in all respects as approved and desired by the Engineer-in-charge of site |
| 107 | C-2) Campus Lighting |
| 108 | XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armouredandservedcable1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 10sq.mm (2Core) Un-armoured (On-Surface) |
| 109 | Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangementhaving 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB\"s) complete in allrespect as approved and desired by the Engineer In-Charge at site:-SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound)confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement |
| 110 | Supply and erection of LED Street Light 45 watt (including LED driver) with pressure die cast aluminium housing with control gear (IP 66 protection),THD< 10%, CRI minimum 70,High power LED with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, efficacy of LED fixture minimum 120 lumens per watt, complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon\"ble Technical Advisor to CM Punjab vide letter No. AT-2021/GL 1410-1422 Dated 06/05/2021 |
