Military Engineer Services-MES has published Tender For Repairs/ Replacement To Asbestos Roof Sheet, False Ceiling, Rain Water Pipes, Rolling Shutter, Steel Door And Att To Certain Buildings At Tech Area At Ins Kalinga And Repairs/ Maint Of Stone Pitching And Retaining Wall At Ins Kalinga And I. Submission Date for this Tender is 17-06-2023. False Celing Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Jun-2023 | Corrigendum for change in schedule of credit and make | Other | 10-06-2023 |
| 2 | 10-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-06-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement (corrugated, semi corrugated, etc. ) sheets in roof coverings at buildings of Height upto 12m including necessary scaffolding and staging complete all as specified and as directed. Note :- Only Damaged/ Leaking sheets to be dismantled without disturbing surrounding sheets. |
| 2 | M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof coverings fixed by using coach screws and rubber washer at buildings of Height upto 12m including necessary scaffolding and stagingcomplete all as specified and as directed. |
| 3 | M & L for Asbestos cement one piece plain angular ridge 6mm thick fixed by using coach screws and rubber washer at workshops or hangers of Height upto 12m including necessary scaffolding and stagingcomplete al as specified and as directed. |
| 4 | Dismantling plain or corrugatedsteel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings at workshops or hangers of Height upto 12m including necessary scaffolding and staging all as specified and as directed. |
| 5 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screwsat workshops or hangers of height upto 12m including necessary scaffolding and staging complete all as specified and as directed. |
| 6 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ Ridges, fixed with self tapping screws at workshops or hangers of height upto 12m including necessary scaffolding and staging complete all as specified and as directed. |
| 7 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, fixed with self tapping screwsat workshops or hangers of height upto 12m including necessary scaffolding and staging complete all as specified and as directed. |
| 8 | S&F 0.80mm thick Galvanised, Plain steel sheeting, fixed with coach screws and washers, in roof ridges, Valley gutters etc. with grade of zinc coating 275, fixed with self tapping screwsat workshops or hangers of height upto 12m including necessary scaffolding and staging complete all as specified and as directed. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 10 | S & F of Framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes ,framed guard bars, barred iron doors, ladders, framed balusters, railings, framework of water tanks and similar work conforming to FE-290,Grade E-165 complete all as specified and as directed. |
| 11 | S & F Steel work in Roof trusses (framed), trusses, purlins, Rafters, Flat iron, Square bars including distance pieces, cleats etc including welding to old members conforming to Fe 410-W (Gde E- 250) quality A as per IS 808(Part V)1976 complete all as specified and as directed. Note : Portions to be order to cutting the damaged part and welding New part. |
| 12 | S & F for Mild steel screw bolts 5 to 10mm neck dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and as directed. |
| 13 | S & F in repairs of PVC Rain water Pipes of Dia 150mm (allowable pressure 6kgf/cm2) single socketed in any length with rubber ring joints fixed to walls including necessary fittings (Clamps should be placed in an interval of 1.00 m) complete all as specified and as directed. |
| 14 | S & F in repairs of 150mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer In Charge. |
| 15 | S & F in repairs of PVC shoe forrain water pipe of 150mm dia complete all as specified and as directed |
| 16 | S & F in repairs of PVC Rain water Pipes of Dia 110mm (allowable pressure 6kgf/cm2) single socketed in any length with rubber ring joints fixed to walls including necessary fittings (Clamps should be placed in an interval of 1.00 m) complete all as specified and as directed. |
| 17 | S & F in repairs of 110mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer In Charge. |
| 18 | S & F in repairs of PVC shoe forrain water pipe of 110mm dia complete all as specified and as directed |
| 19 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ blankets, any thickness, including frame work of Height of Building/Hanger upto 12m including necessary scaffolding and staging complete al as specified and as directed. |
| 20 | Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long of Height of Building/Hanger upto 12m including necessary scaffolding and staging complete al as specified and as directed. |
| 21 | M & L for Providing and fixing Gypsum Board 10mm thick in ceiling fixed with screw as per manufacturers instructions |
| 22 | M & L for applying two coats of Oil bound distemper on False Ceiling |
| 23 | Taking down of Gypsum boards, repair existing aluminium grid and providing sufficient no of Anchor fasteners and refixing the gypsum board to repaired grid system complete all as specified and as directed. (Note: Extra gypsum board will be measured separately under supply only item herein after) |
| 24 | Supply only Gypsum Board 10mm thick in ceiling concealed type fixed with screws including GI frame work fixed with Anchor fasteners and applying two coats of Oil Bound Distemper over a coat of 2mm thick putty complete all as per manufacturers instructions and as directed by Engineer In Charge |
| 25 | Taking down of Asbestos cement plain buildingboards, repair existing wooden grid by cutting down damaged wooded pieces and replacing, Refixing the Asbestos cement plain building boards to repaired grid system complete all as specified and as directed (Note : New AC Sheet board & Wooded piece will be measured separately under supply only item herein after) |
| 26 | Supply only 6mm thick Asbestos cement plain building boards, on ceiling fixed to aluminium grid framework/ timber framework with screws complete all as specified |
| 27 | Supply only 2nd class hardwood Plain, solid, Purlins and frames, frame work in false ceiling wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 28 | M & L for Second class hardwood Plain fillets square, rectangular or triangular insection, clean sawn, secured with nails orbrads of size exc 6 Sqcm and notexc 13 Sqcm complete all as specified |
| 29 | Supply and fix in repairs of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed. |
| 30 | M & L for Post construction Anti Termite Treatment along the Internal/ External wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron |
| 31 | M & L for Post construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors |
| 32 | Repair and servicing Rolling shutters by taking down and re-fixing it to its original position after cleaning all parts, straighten of guide rails, replacing damaged strips, hood covers, ball bearing, gear boxes, helical wire springs, lock plates bracket plates, shaft rod as required, greasing/ oiling, servicing for smooth functioning for all parts, including welding etc. for all types of rolling shutters, size n. exc. 10Sqm complete all as specified and directed. Note:- Spare parts to be replaced shall be measured and paid separately under respective item herein after. |
| 33 | All as per Ser. No. 32 above but rolling shutter size exceeding 10 Sqm but not exceeding 20 Sqm complete all as specified and directed. |
| 34 | Supply only steel sheet 75mm wide lath strip 1.25mm thick for rolling shutters including mild steel clips at either ends duly painted with two coats of Aluminium paint (shade to match with the existing) over a shop coat of red oxide primer complete all as specified and directed. |
| 35 | Supply only mild steel spring 75mm to 150mm dia 450mm length, "O" gauge made of high tensile steel wire conforming to IS: 4454 having 60 to 80 helical for smooth working condition for rolling shutters complete all as specified and directed. |
| 36 | Supply only bevelled gear as required at site and as directed by the Engineer-in-Charge. |
| 37 | Supply and fix mild steel hood covers of 1.00mm thick bent to shape to match with the existing trackers including stiffeners with MS flat iron and preparation of steel surfaces and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Supply only mild steel medium grade shaft pipe of 40 mm dia as required for rolling shutter shaft complete all as directed by Engineer-in-Charge. |
| 39 | Supply only mild steel medium grade shaft pipe of 50 mm dia as required for rolling shutter complete all as directed by Engineer-in-Charge. |
| 40 | Supply only ball bearing suitable for 50 mm dia of approved make,complete all as directed by Engineer-in-Charge. |
| 41 | Supply only ball bearing suitable for 65 mm dia of approved make,complete all as directed by Engineer-in-Charge. |
| 42 | S & F Automatic rolling shutter motor 200 W 50 Hz, fixed to pillar with nut and bolt in cement concrete 1:2:4 type B1 including necessary chipping and demolition and finishing the same with existing Rolling Shutter complete all as specified and as directed. |
| 43 | Taking down rolling shutter of any description, size not exceeding 20 Sqm each and removal from site to store complete all as specified and directed. |
| 44 | S&F 1.25mm thick laths steel rolling shutters without ball bearing, as specified including top hood cover 50mm anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, push, pull or manual type or electrically operated (excluding motor) complete all as specified and directed. |
| 45 | M & L for Preparation of Old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying a coat of Aluminium paint complete all as specified and as directed. |
| 46 | M & L for Preparation of Old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying a coat of Synthetic Enamel paint complete all as specified and as directed. |
| 47 | M & L for Preparation of New steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of Synthetic Enamel over a coat of red oxide primer complete all as specified and as directed. |
| 48 | Dismantling Structural steel work of doors sliding / Hung type in any description not otherwise provided for complete all as specified and as directed |
| 49 | S & F of rolled mild steel of grade Fe-290 (Grade E-165) in framed work as in Steel doors (Sliding / Hunged) of angle, pintle hinges, gussets plates, purlins, Flat iron, Angles, Rafters, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering., Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed. |
| 50 | Repairs/ Replacement to MS Pintle Hinges of Steel Doors including taking out door (Individual or connected) and removing the hinge from brickwork/ concrete and refixing the same or new one by dismantling wall of size 200 x 300 x 200mm (Concrete / Brick) and making good using Cement Mortar 1:4, fixing 10mm thick MS Plate of same size of opening, Drilling 12mm dia 150mm length anchor fasteners at 50mm centre to centre through MS plate to wall, welding Pintle Hinges to MS Plate as directed and filling the opening with PCC 1:1.5:3 type A1 (using 20mm graded aggregate) including necessary formwork and finishing the same with existing wall finish complete Notes :- (i) MS Pintle hinges and MS Plate measured and paid under separate item in KG. (ii) MS Anchor fasteners measured and paid under separate item herein after. (iii) Changing of one hinge measured as one job. |
| 51 | Supply only rolled mild steel of grade Fe-290 (Grade E-165) in framed work as in Steel doors (Sliding / Hunged) of angle, pintle hinges, gussets plates, purlins, Flat iron, Angles, Rafters, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering., Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed. |
| 52 | Supply only mild steel Plates (plain or chequered), square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W(Gde-E- 250) quality-A complete all as specified and directed. |
| 53 | Supply only Brass Wedge type Anchor fasteners M10 x 150mm length complete all as specified and directed. |
| 54 | M & L for Running weld in repairs to Steel doors, Rolling shutters and Gates etc. of welding thickness size exc 9mm but not exc 20mm. |
| 55 | M & L for Running weld in repairs to Trusses etc. of welding thickness size exc 9mm but not exc 20mm. (Building height upto 12m) |
| 56 | Repair and servicing Steel door shutters by taking down and re-fixing it to its original position after cleaning all parts, straighten of bent portions, Changing of damaged rollers and guide rails, greasing, servicing for smooth functioning, including welding of damaged parts with new ones etc. for all types of Steel door shutters, size n. exc. 20Sqm complete all as specified and directed. Note:- Spare parts to be replaced shall be measured and paid separately under respective item herein after. |
| 57 | S & F in repairs to SS 304 Grade Tower bolts 450mm length and fixed to MS Doors complete all as specified and directed. |
| 58 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar |
| 59 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 |
| 60 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 |
| 61 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint |
| 62 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 63 | Supply and fix Durastrip SBS Bitumen Self Adhesive Bitumen Flashing Tape of Size1000 cm x 10 cm x 1.6 mm, Silverthickness on roof sheets complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Supply and fix Durastrip SBS Bitumen Self Adhesive Bitumen Flashing Tape of Size1000 cm x 15 cm x 1.6 mm, Silverthickness on roof sheets complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Dismantling stone pitching in portions built in cement mortar including levelling the dismantled area to get the even surface by removing the vegetation etc. complete all as specified and directed. |
| 66 | M&L for boulder pitching, laid dry, hand packed tightly & grouted with cement and sand mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. |
| 67 | All as per item No. 66 above but except stone. (Note : Stone obtained from Item No 65 shall be reused) |
| 68 | Demolition of brick work/ Stone/ Boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 69 | M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 70 | All as per item No. 69 above but except stone |
| 71 | M&L for Pre-cast cement concrete block masonry as per IS 2185,gradeC5(using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting inCM 1:6 |
| 72 | M&L for base surface preparation by compacting and consolidation and filling of moorum, if required in stone pitching complete as specified and as directed by the Engineer-in-Charge. |
| 73 | M & L for grouting of stone pitching in cement mortar 1:4 including removal of loose mortar & vegetation etc, complete as specified and as directed by the Engineer-in-Charge. |
| 74 | Raking out joints/ pointing filled with loose cement mortar/ cement mortar of random rubble or polygonal rubble uncoursed or brought up to courses or stone pitching built in cement mortar complete all as specified and as directed by the Engineer-in-Charge. |
| 75 | M & L for Flush pointing to Random rubble masonry, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed. |
| 76 | Demolition of unreinforced cement concrete of any description and in position not otherwise specially provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 77 | M&L for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation filling and mass concrete. |
| 78 | M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregate) as in copings and haunchings of Manholes, finished even and smooth using extra cement complete all specified and as directed |
| 79 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished fair and even complete all as specified and as directed by the Engineer-in-Charge. |
| 81 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 82 | M & L for RCC (1:1.5:3) Type A1( 20 mm graded stone aggregate) in Foundations, including rafts, footings, plinth beam etc and mass concrete complete all as specified and as directed by Engineer-in-Charge |
| 83 | M & L for RCC (1:1.5:3)Type A1( 20 mm graded stone aggregate)Columns, pillars, piers, posts and struts |
| 84 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 85 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions and finish the surface fair |
| 86 | S&F reinforcement TMT steel bars of 10mm dia. and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia. or securing with clips or welded complete all as specified and as directed by the Engineer-in-Charge. |
| 87 | S&F PVC in repairs for 75 mm bore pipes in any length fixed in Retaining walls/ RR Masonry walls/ Block masonry walls as spout pipes complete all as specified and directed. |
| 88 | Uprooting of wild trees such as grasses/ bushes etc. from the Man holes/soil pipes/ Septic tanks/ Soak wells surroundings including its penetrated roots and making good to the damaged plaster by providing cement mortar (1:3) and finished the surfaces to match with existing surfacescomplete all as specified and as directed. (Cost of materials is deemed to be included within the quoted rate) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
