|
| 1 | M&L for surface dressing not exceeding 15 cm deep in hard/dense soil all as specified and directed. |
| 2 | Excavation over areas n.exc 1.5m depth for foundation etc and getting out in hard/dense soil all as specified and directed. |
| 3 | Excavation over areas exc 1.5m depth and n.exc 3.0m depth for foundation etc and getting out in hard/dense soil complete all as specified and directed. |
| 4 | Material and labour for PCC (1:4:8), type-D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 5 | Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 6 | Material and labour for hardcore of broken stone or boulders of gauge not exceeding 63mm and deposited spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 7 | Material and labour for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed |
| 8 | Material and labour for treating the top surface of filled earth @ 5 litres of emulsion per square metre of surface all as specified and directed. |
| 9 | Material and labour for treating the soil under plinth protection @ 5 litres of emulsion per square metre of surface area all as specified and directed. |
| 10 | Material and labour for treating the soil along with external perimeter of building @ 2.25 litre of emulsion per metre of the perimeter wall all as specified and directed. |
| 11 | Material and labour for cement concrete type B-0, (1:2:4) using 12.5mm graded stone aggregate 40mm thick as in DPCcomplete all as specified and directed. |
| 12 | Material and labour for Pre-cast cement concrete blocks (1:2:4), type B1 masonary with solid blocks, exc. 10cm in width and setting in CM (1:4) complete all as specified and directed. |
| 13 | Material and labour forProviding precast cement concrete solid building blocks n.exc 10cm thick type B1 , (1:2:4)using 20mm graded aggregate set in cement mortar (1:4) all as specified and directed. |
| 14 | Material and labour for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified & directed. |
| 15 | Material and labour for mild steel TMT bars 5 to 8mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 16 | All as per item No.15here in beforebut 5 to 10mm dia and over as in spacers , stirrups all as specified & directed. |
| 17 | Material and labour for RCCdesign mix M-30 using 20mm graded stone aggregate as in Foundations, footings, plinth beams etc all as specified and directed. |
| 18 | Material and labour for RCCdesign mix M-30 using 20mm graded stone aggregate as in Columns, pillars, piers etc all as specified and directed. |
| 19 | Material and labour Providing cement concrete design mix M-30using 20mm graded stone aggregate as in Beams, cantilevers, bressummers lintels over 1.5m clear span including necessary form work complete all as specified and directed. |
| 20 | Material and labour Providing cement concrete design mix M-30using 20mm graded stone aggregate as in Chajjasincluding necessary form work complete all as specified and directed. |
| 21 | Material and labour RCCdesign mix M-30 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 22 | Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed. |
| 23 | Material and labour for form work to edges for concrete flat exc 10cm and not exc 20cm thick for flat rough finished surfaces all as specified and directed. |
| 24 | Material and labour for use & waste of form work to sides of concretefoundation, footings, plinth beams etc rough finished surfaces all as specified and directed. |
| 25 | Material and labour for use & waste of form work to sides of pillars, columns etc rough finished square or rectangular surfaces all as specified and directed. |
| 26 | Material and labour for Formwork to sides and soffits of floor or roof beams, lintel etc all as specified and directed. |
| 27 | Material and labour for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 28 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed. |
| 29 | Removing excavated material n. exc 50 m and deposited where directed at a level not exc 1.5 m above the base as in soil. |
| 30 | Material and labour for Machine cut kota stone slab flooring 20-25 mm thickover cementscreed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and directed. |
| 31 | Material and labour for Machine cut kota stone slab20-25 mm thick in skirting, dado over cementscreed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and directed. |
| 32 | Material and labour for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigment complete all as specified & directed. |
| 33 | Material and labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thicknesswith grey cement and pigmentlaid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed |
| 34 | Material and labour for screed bed or bedding layer of 20mm thick in cm (1:3) for laying floor finishes etc all as specified and directed |
| 35 | Material and labour for 10mm thick screed bed in cm (1:3) for APP membrane complete all as specified and directed. |
| 36 | Material and labour for rendering 15 mm thick in cm (1:6) on fair faces of concrete surfaces finished even & smooth without using extra cementall as specified and directed. |
| 37 | Material and labour for rendering 10mm thick in cm (1:4) on fair faces of brick work or concrete surfaces for backing coat of wall tiles etc all as specified & directed. |
| 38 | Material and labour for rendering 5mm thick in cm (1:4) on fair faces of concrete surfacesof ceiling finishedeven & smooth using extra cementall as specified and directed. |
| 39 | Supply and fix anodised powder coated aluminium frame for doors, windows, ventilatorswith one or more rebates including joining cleats for fixing etc complete all as specified. |
| 40 | Supply and fix 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified. |
| 41 | Supply and fix 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified. |
| 42 | Supply and fix 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed. |
| 43 | Supply and fix 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed complete all as specified and directed. |
| 44 | Supply and fix 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 45 | Supply and fix 150mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed. |
| 46 | Supply and fix Aluminium grills of DG 104(10mm) powder coated of make Decogrill or equivalent including dismantling of old unserviceable alumunium grill all as specified and directed |
| 47 | Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed. |
| 48 | Material and labour for 4.8 mm thick sheet glass, ordinary quality fixed to aluminum frame work and glazing with suitable size aluminum anodised beading exc 0.5 Sqm in each pane all as specified and directed. |
| 49 | Material and labour for for two coats of distemper, oil emulsion over a coat of alkali resistant primer including preparation of newly plastered surfaces of walls complete all as specified and directed. |
| 50 | Material and labour for three coat of white wash on ceiling including preparation of plastered surfaces of ceiling completeall as specified and directed. |
| 51 | Material and labour for preparing new plastered surfaces and applying two coats of weather proofexterior acrylic emulsion paint over a coat of self primer on wall surfaces complete all as specified and directed. |
| 52 | Material and labour for applying 3mm thick wall care putty on walls all as specified and directed. |
| 53 | Material and labour for applying 3mm thick wall care putty on ceiling all as specified and directed. |
| 54 | Material and labour for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, at the rate of 0.40 ltr/Sqm, providing and laying 3 mm thick APP modified water proofing membraneweightingnot less than 3 Kg/Sqmof approved makeincludingminimum 10 cmside lap and 15cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminousaluminium paint at the rate of 0.1Kg/Sqm complete all as specified and directed. |
| 55 | Material and labour for 100 mm thick plain cement concrete , type C-2, (1:3:6) using 40mm graded aggregate as in sub base/plinth protection all as specified and directed. |
| 56 | Supply and fixaluminium (Die cast) body, door closer, hydraulically regulated designation No.3, universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg all as specified and directed |
| 57 | Supply and fix 12 mm thick partical board medium density,flat pressed, single layer type or three layer type with BWR type adhesive, fixed in Aluminium frame with rubber packing & aluminium beading complete all as specified. |
| 58 | Supply and fix 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, complete all as specified and directed by Engineer-in-Charge. |
| 59 | Demolition of Concrete of any description and in any position not otherwise specifically provided for(below or above ground level complete all as specified and directed. |
| 60 | Material and labour for brushing neat cement slurry with 3.0 kg of cement per sq. meter all complete as specified and directed. |
| 61 | Material and labour for 40mm thick wearproof topping (by incorporating an approved mettalic floor hardner ), laid on concrete floors and pavings. Metallic floor hardener and cement shall be thoroughly mixed to an even colour in dry state in the proportion recommended by the manufacturer. This mixture shall be mixed with crushed granite/ basalt/trap as indicated (6mm and down) in the proportion 1:2 by volume. Requisite amount of water shall then be added to form a workable mixture and finished even and smooth complete all as specified and directed. ( Note:- Mettalic hardner shall be paid separately.) |
| 62 | Material and labour for mettalic floor hardner of approved quality consisting of uniformally graded metal particles, free from non-ferrous metal particles, oil, grease sand, soluble alkaline compounds for increasing abrasion resistance and shall be Ironite, Hardonate, Ferronite or other equal and approved metallic floor harderner complete all as specified and directed. |
| 63 | Supply and fix 3mm thick glass dividing strips, width of strip 38mm inserted in position and conform to design complete all as specified and directed. |
| 64 | Taking up or down GI tubing 15mm bore and connections all as directed. |
| 65 | Taking up or down GI tubing 20mm bore and connections all as directed. |
| 66 | Taking up or down GI tubing 25mm bore and connections all as directed. |
| 67 | Supply and fix 15 mm dia UPVC pipes of pressure rating 10 Kgf/cm2fixed complete to walls, ceiling or in floors etc complete all as specified and directed. |
| 68 | Supply and fix 20 mm dia UPVC pipes of pressure rating 10 Kgf/cm2fixed complete to walls, ceiling or in floors etc complete all as specified and directed. |
| 69 | S & F 25 mm dia UPVC pipes of pressure rating10 Kgf/cm2fixed complete to walls, ceiling or in floors etc complete all as specified and directed. |
| 70 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed. |
| 71 | Material and labour for roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. |
| 72 | Material and labour for Glazed coloured ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting dados and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar (1:4) and taking down old tiles complete all as specified and directed. |
| 73 | Material and labour for vitrified ceramic tiles of premium quality, light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sq.m (size 600 x 600 mm), laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified. |
| 74 | Material and labour for vitrified colouredtiles of 600x 600 x 10-12 mm thick as in skirting set and jointed in neat cement slurry and pointed in colour cement over 10 mm thick rendering in cement mortar 1:3 including taking down old wall dado/finishes of any description, complete all as specified and directed. |
| 75 | Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roof covering etc complete. |
| 76 | Material and labour for pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/claddingwall, fixed with self tapping screws complete all as specified and directed |
| 77 | Material and labour for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/claddingwall, fixed with self tapping screws complete all as specified and directed |
| 78 | Supply and fix 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof complete all as specified and directed. |
| 79 | Demolition of precast concrete block walling built in cement mortor and removal of debris ousite the MD land complete all as specified and directed. |
| 80 | Material and labour Providing precast cement concrete solid building blocks masonryexc 10cm width, type C1,1:3:6 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed |
| 81 | Material and labour for rendering 15 mm thick inCM 1:4 on fair faces of brick/concrete surfaces to be finished even and smooth complete all as specified. |
| 82 | Material and labour for preparation of new plastered surfaces of walls of any description including and applying two coat of cement base paintcomplete all as specified and directed. |
| 83 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 84 | Supply and fix MS 1.00mm thick MS plain black sheet in steel gates and similar work,cut to size,holes punched,including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded as required complete all as specified and directed. |
| 85 | Material and Labour for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 86 | Excavating in post holes (or similar holes) each not exceeding 0.5 Cum in hard / dense soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm etc complete all as specified and directed. |
| 87 | M/L for PCC (1:3:6), type-C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed. |
| 88 | M & L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed. |
| 89 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 90 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire all as specified and directed. |
| 91 | Supply and fix MS flat fixed to Post/Vertical members including securing bolts for chain link fencing etc complete all as specified and directed. |
| 92 | Supply and fix for mild steel round bars 10mm dia and over for securing chain link fencing cut to length bent to shape required including bolting etc complete confirming to FE 290 Gde E-165 complete all as specified and directed |
| 93 | Supply and fix Mild steel bolts of dia not exceeding 12mm purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exceeding 30cm long etc complete all as specified and directed |
| 94 | Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe 410 -W (Gde- E- 250) quality-Acomplete all as specified and directed. |
| 95 | M&L for point wiring complete with 1.5 Sqmm two single core PVC insulated, unsheathed 1100volts agrade cable with multi stranded copper conductor FRLS grade conforming to IS-694 part II with ISI mark FRLS grade drawn through and including suitable size rigid non metalic PVC conduit in surface with all accessories, including suitable size sunkpresses steel or cast iron terminal box with 3mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as earth wire connected to metallic bodies of luminaires/fan etc at one end and to common earth dolly at other end all as specified for fan/light point all specified and directed by engineer-in-charge. |
| 96 | Ditto as per item no 95 here-in-before but cable 2.5 sqmm size on independent board |
| 97 | M&L for point wiring complete with 4.0 Sqmm single core PVC insulated, sheathed 1100volts grade cable with stranded copper conductor FRLS grade conforming to IS-694 part II with ISI mark FRLS grade drawn through and including suitable size in PVC conduit on surface with all accessories on wall/ceiling/floors/roofs etcincluding providing 4.0 Sqmm PVC insulated sheathed straded copper conductor cable as earth wire connected to metallic bodies of luminaires etc at one end and to common earth dolly at other end for One 3 pin socket outlet,15 Amps,independent all as specified . |
| 98 | Ditto as per item no 97 here-in-before but for One 5 Amps socket point on independent board. |
| 99 | Supply and fix Integral sleek extruded polycarbonate batten for LED tube light with white acrylic cover suitable for upto1x20 watts LED tube light. Make BAJAJ Cat No. BLRB-DB 118 or equivalent in Havells/CG |
| 100 | Supply and fix LED tube rod 20 Watt, 6500 K, 1200 mm long complete all as specified and directed.Make : BAJAJCat No. BLRB 20 CW LEDor equivalent make in Havells/Crompton Greaves |
| 101 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed |
| 102 | Supply and fixswitch piano 5 amps one way flush type complete all as specified and directed. |
| 103 | Supply and fix switch socket combination2 in 1, 3 pin, 5 Ampsflush type,ISI marked, complete all as specified and directed. |
| 104 | Supply and fix switch socket combination 16A 3 pin, flush type, ISI marked,complete all as specified and directed. |
| 105 | Supply & fixing in repairs LED 70 Watt building light luminaire, LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device.making necessary connection of Make Havells cat No..ENDURAPEARLPLUSSL70WLED757SASYTOPC or equivalent make in Philips/ C&S |
| 106 | M&L for sub main wiring withtwo runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 4.0 sqmm PVCinsulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. [Note :- Necessary cutting and chasing shall be measured and paid separatly under relevant items of this schedule] |
| 107 | Supply and fixing sheet metal enclosureMCB DB SPN4 ways doubledoor type with suitable bus barcomplete all as specified and directed. |
| 108 | Supply and fixingMCB SP, 6 to 32Amps, \"\"C\"\" series 240 Volts, single phase, 10 KA breaking capacity complete all as specified and directed. |
| 109 | Supply and fixingMCB SPN, 32Amps, \"\"C\"\" series 240 Volts, single phase, 10 KA breaking capacity complete all as specified and directed. |
| 110 | Supply and Fixing of Ceiling rose, single phase,PVC or polycarbonate with isolated body at the locations required for fans or lights located on the ceiling 10 feet above the ground. |
