Military Engineer Services-MES has published Tender For Addition Alteration To Dy Oi/C, Hal (Tad) Manager, Hal(Hd) Manager And Hal Staff Cabins At Cgais Goa Under Ge(I)(Cg) Goa. Submission Date for this Tender is 20-06-2023. Building Work Tenders in South Goa Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-06-2023 |
| 2 | 15-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-06-2023 |
| Sl. No. | Item Description |
| 1 | S & F Virified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors/Wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 20mm thick in Cement mortar 1:6 for laying floor finishes over 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) including dismantling the old unserviceable tiles/stone complete all as specified and directed. |
| 2 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including screed bed or bedding layer of mortar 20mm thick in Cement mortar 1:6 for laying floor finishes over 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) including dismantling the old unserviceable tiles/stone complete all as specified and directed. complete all as specified and directed. |
| 3 | M & L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including rendering 10mm thick in Cement mortar 1:4 on fair faces of brick work or concrete surfaces other than fair face of brick work to receive tiles/stone including dismantling the old unserviceable one complete all as specified and directed |
| 4 | M & L and Fixing of Mineral Fibre Acoustical Suspended Ceiling System with Dune (Board) Edge Tiles 24mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance =85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 /Class 1 (BS 476 pt - 6 &7) in module size of 600x600x16mm, suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on Armstrong Prelude 38 with 24mm wide T- section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200mm & 600mm Cross Tees with a web height of 38mm and a load carrying capacity of 15.34Kgs/M2 & minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile & Grid system used together should carry a 30 year warranty complete all as specified and directed. |
| 5 | M & L and Fixing Acoustical Wall Paneling’ with Square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Engg-in-charge of size 2100x600mm or 1800x600mm or 1200x600mm or 600x600mm providing a minimum sound absorption level of 0.95 NRC system of impaler hook & 2.50 Kg/m2 to be affixed to wall using Wall panel impalers construction adhesives as per the instructions of Engineer in Charge complete all as specified and directed. |
| 6 | Supply and installation of sound proof fixed type UPVC windows with two layer sound proofing glass with air gap in between glass minimum size of glass 5mm & air gap minimum is 12mm complete all as specified and directed. |
| 7 | S & F PTMT Handle 150mm size complete all as specified and directed. |
| 8 | Formingjambs etc to openings including cuttings toothings and properly bondings into old work including facing and pointing to match existing work in cement mortar 1:4 complete all as specified and directed. |
| 9 | Making good under cills (or over arches, lintels and bressummers) including all pinning as necessary in Cement mortar 1:4 complete all as specified and directed. |
| 10 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of Cover plate 140mm completed all as specified directed. |
| 11 | S & F Door closer hydraulically regulated of aluminium extruded section body type, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 12 | M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6 including taking down old plaster and raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 13 | M & L Preparing of new plaster surface on wall complete over a coat of 3mm wall care putty and applying 2 coats of distemper oilemulsion over a coat of alkali resistance primer complete all as specified and directed. |
| 14 | Taking down chowkat or frames n.exc 1.5 Sqm each (w/o taking of shutters from the frame) complete all as specified and directed. |
| 15 | Taking down chowkat or frames exc 1.5 Sqm but n.exc 4 sqm each (w/o taking of shutters from the frame and removing to store) complete all as specified and directed. |
| 16 | M & L 2nd Class hard wood plain, Solid straight, Chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 17 | S & F 40mm thick pre laminated Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 18 | S & F 30mm thick flush shutters, solid core construction with partical board core and decorative veneer with lipping /frame to match complete all as specified and directed. |
| 19 | S & F 100mm long, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 20 | S & F 150mm long aluminium powder coated barrel tower bolts of extruded section complete all as specified and directed. |
| 21 | S & F 150mm long extruded aluminium alloy, fabricated type handle, powder coatedcomplete all as specified and directed. |
| 22 | S & F aluminium alloy, anodised, 150mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 23 | S & F 300mm Brass sliding door bolt with sand or die-cast brass hasp, staple(bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 24 | S & F 100mm long butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed. |
| 25 | S & F 125mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 26 | S & F 150mm brass handles, cast type, polished bright complete all as specified and directed. |
| 27 | M & L Preparation of new wooden surfaces over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 28 | M & L Preparation of Old wooden surfaces over 10cm width or girth and applying one coats of Synthetic enamel paint complete all as specified and directed. |
| 29 | M & L Pre laminated exterior grade both side laminated board of 19-20mm thick both side complete all as specified and directed. |
| 30 | S & F 5.5mm thick sheet glass, ordinary quality, in square exc 0.5 Sqm each panel complete all as specified and directed. |
| 31 | S & F Horizontal venetion blind consisting of alum head rail, vanes/louvers 4” wide of approved tint and traverse cord fixed in position complete all as specified and directed. |
| 32 | S & F of modular work stationof size 1200mm x 600mmx 1200 mm(entire cluster) i.e length of table top 1200mm, width of table is 600mm & height of table 750mm alongwith partition wall with top aluminium frame with glass, storage unit , keyboard tray, CPU trolly etc as per drawing & details appended below at Item no. 32.01 to 32.04 with all jointing material and spare parts complete all as specified and directed. (a) Workstation screen (b) Material shall be 18mm marine plywood (IS: 710) with both side lamination with 1.0 mm thick of decorative as per direction of Engineer in charge. (c) Horizontal screen height 1200mm (d) Below desk duct to all screen (e) Standard cable access hole to corner top etc. Note:- Contractor shall submit 24 months genuine warranty against manufacturing defects after completion of work. |
| 33 | TABLE TOP:-18mm thick marine plywood (IS:710) with both side laminated with 1.0mm thick decorative laminates for size 1200mm x 600mm table top of work station fitted with all accessories complete all as specified & directed. [Note:- (i)Actual size may be varried at site as per site requirement & as per directed by Engineer-in-charge. (ii) Payment shall be made from Actual measurement of size of Table top provided by the bidder & all as directed by Engineer-in-charge]. |
| 34 | PARTITION:-Partition of standard aluminium anodised powder coated frame work of size 64x 38mm with snap beading including 16mm marine plywood(IS: 710) with both side laminated of 1.0mm thick decorative laminates fixed in between powder coated anodized Aluminium frame for 600mm x 1200mm (Width x Height) for side & 1200mm x 1200mm (Width x Height) for Front and in top portion partition shall be with sheet glass of 4mm thick to be fixed between aluminium frame for 450mm x 600mm size including all fixtures as per drawing (attached) with labour complete all as specified & directed. Note:- (i)Actual size may be varried at site as per site requirement & as per directed by Engineer-in-charge. (ii) Payment shall be made from Actual measurement of size of Partition provided by the bidder & all as directed by Engineer-in-charge]. |
| 35 | S & F the following accessories to each workstation as given below complete all as specified & directed.:- (a) Pin board = 1 Nos( 2" x 2") (b) Reminder pad = 1 Nos (c) Keyboard tray = 1 Nos (d) Wire manager =1 Nos (e) CPU trolly = 1 Nos (f)Popup box = 1 Nos [Note: Approx number of workstation will be 4.00 and in each workstation the above spare parts is required to be fitted. Bidders shall quote the rate for all accessories of each work station]. |
| 36 | STORAGE UNIT:-Modular low height storage unit as per drawing, using 16mm marine plywood(IS:710) and finish with double side lamination 1mm thick 400mm x 650mm (Width x Height) including 3nos drawers and 3nos Premium Chromium Plated handles with lock and key(Centre lock for all 03 drawers) arrangement and 4 wheels (heavy castors for movements) at bottom of the storage with all fixtures with labour complete all as specified & directed. |
| 37 | SCH A PART-II[ E/M PART] Taking down carefully old existing batten/PVC casing capping (or) conduit point aluminium/copper wiring i.e light, fan, Bell, socket including batten/ casing/ conduit,switch boards, laminated sheets, round blocks, MS Sunken boxes, light fittings/holders, fan regulator of any type, other fittings & fixtures and making good the disturbed surfaces, walls, floors and stair cases complete all as specified and directed. |
| 38 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store and refixing the same after painting with two coats of synthetic enamel paint complete. |
| 39 | M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSPVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit andits accessories, concealed in wall/ceiling of suitable size, ISI marked and Sunken box of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting modular switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed. |
| 40 | One light/ Fan point controlled by one, one way switch 5/6 Amp complete all as specified and directed. |
| 41 | One socket point 2/3 Pin 5/6 Amp on same board complete all as specified and directed. |
| 42 | One socket point 2/3 pin, 5/6 Amp on Independent board complete all as specified and directed. |
| 43 | One bell point controlled by one switch 6 Amps 1 way complete all as specified and directed. |
| 44 | All as per item No 35.00 here-in-before but with PVC FRLS insulated unsheathed multi stranded copper conductor of size 4 Sqmm, 1100V grade for 2/3 pin 6/16Amps switch socket on independent board with PVC FRLS insulated unsheathed copper conductor of size 4 sqmm using as earth continuity wire and connected to common earth dolly complete all as specified and directed. |
| 45 | S & F Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 46 | S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 47 | S & F Modular bell push 6A, 1 module complete all as specified and directed. |
| 48 | S & F Modular switch 1 way 16A complete all as specified and directed. |
| 49 | S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified. |
| 50 | S & F Electric call bell 230 Volt AC complete all as specified and directed. |
| 51 | S & F Modular fan step regulator, 2 module complete all as specified and directed. |
| 52 | M & L Ceiling rose 3 treminals/ PVC polycarbonate isolated body size (65x50) mm surface type, 230V complete all as specified and directed. |
| 53 | S & F 8 module modular white cover plate with frame complete all as specified and directed. |
| 54 | S & F 6 module modular white cover plate with frame complete all as specified and directed. |
| 55 | S & F 3 module modular white cover plate with frame complete all as specified and directed. |
| 56 | S & F in repairs 1 module modular white cover plate with frame complete all as specified and directed. |
| 57 | S & F in repairs LED tube light fitting 1 x 18 W, 230V wall mounted integrated batten, 4 ftLED module fixed on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and includingconnecting up with twin core twisted flexible copper conductorcable with suitable sizescomplete all as specified and directed. |
| 58 | S & F 1 x 36 efficient LED recessed 2"x2" luminaire to enhance with comfortable experience through its classic design & glare free soft illumination, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size in PVC conduit complete all as specified and directed. |
| 59 | S & F in repairs Exhaust fan made of sturdy Engineering plastic 250mm sweep, 1200 RPM suitable for working on 230V, 50Hz, AC, SPN supply complete with louvers and frame fixed with suitable size GI bolts, nuts and washers duly grouted and connecting up with 0.75 Sq.mm size 3 core PVC insulated flexible cable with multistranded copper conductor from ceiling rose to connector of exhaust fan complete all as specified and directed. [Note - Old removed exhaust fan shall be deposited in MES store] |
| 60 | M & L Submain wiring with 2 runs of single core 4 Sqmm FRLS PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including PVC conduitmarked and accessories concealed in wall/ceilingincluding one run of single core 4 Sqmm FRLS PVC insulatedunsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/ main board including taking down old unserviceable one complete all as specified and directed. |
| 61 | S & F in repairs MCB DB SPN double door 8 way sheet metal enclosure SPN 240 V 50 Hz horizontal with IP-42 degree protection complete all as specified and directed. |
| 62 | S & F in repairs MCB SPN 40 Amp, "C" series, 230 volts, complete all as specified and directed. |
| 63 | S & F in repairs MCB SP "C" series 06 to 32 Amp, 230 volts, complete all as specified and directed. |
| 64 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 65 | Taking down only Spilt AC Unit wall mounted, high wall Split units indoor/outdoor complete of capacity 1.5/2 ton with voltage stablizer & refixing the same complete all as specified and directed. |
| 66 | M & L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, using galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point PCC 1:2:4 type B1 using 20mm graded stone aggregates as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4, type B1 with 8mm Tor steel @ 100mm C/c both way with lifting handle including necessary excavation, earthwork including testing on completion complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
