}

Tender For Biennial Contract For Routine, Preventive And Breakdown Maintenance Of Air Pre-Heater And Preventive & Breakdown Maintenance Of Scanner Fan, Secondary Air Damper Control, Spring Hanger, Igniters, Repairing And Servicing Various Dampers Of Air F, parichha-Uttar Pradesh

Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited-UPRVUNL has published Tender For Biennial Contract For Routine, Preventive And Breakdown Maintenance Of Air Pre-Heater And Preventive & Breakdown Maintenance Of Scanner Fan, Secondary Air Damper Control, Spring Hanger, Igniters, Repairing And Servicing Various Dampers Of Air F. Submission Date for this Tender is 17-06-2023. Springs Tenders in parichha Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

37688619
Tender For Biennial Contract For Routine, Preventive And Breakdown Maintenance Of Air Pre-Heater And Preventive & Breakdown Maintenance Of Scanner Fan, Secondary Air Damper Control, Spring Hanger, Igniters, Repairing And Servicing Various Dampers Of Air F
Open Tender
Indian
Uttar Pradesh
parichha
17-06-2023

Tender Details

Biennial Contract For Routine, Preventive And Breakdown Maintenance Of Air Pre-Heater And Preventive & Breakdown Maintenance Of Scanner Fan, Secondary Air Damper Control, Spring Hanger, Igniters, Repairing And Servicing Various Dampers Of Air Flue Gas Path With Other Associated Work Of Boiler Unit#5 & 6, 2X250mw, Ctps, Ptpp, Parichha, Jhansi

Key Value

Document Fees
INR 1180 /-
EMD
INR 30000.0 /-
Tender Value
INR 28.02 Lakhs /-

BOQ Items

Name of Work: Biennial contract for Routine, Preventive and Breakdown maintenance of Air Pre-heater and Preventive & Breakdown maintenance of scanner fan, Secondary air damper control, spring hanger, igniters, repairing and servicing various dampers of air flue gas path with other associated work of boiler Unit#5 & 6, 2x250MW, CTPS, PTPP, Parichha, Jhansi
Sl. No. Item Description
1Round the clock routine & preventive maintenance of Air Pre-Heater with other associated work of boiler of Unit no. 5 & 6 of 2x250 MW, PTPP, Parichha, Jhansi (One Job = One day/3-shifts per Unit)
2Servicing of Air Motor of Air Pre-heater.
3Replacement/Resetting of radial seal leaves and plates.
4Resetting/replacement of circumferential (bypass) seal.
5Repairing/Replacement of APH cold end & hot end rotor post seal.
6Resetting/Replacement of axial seal and leveling of axial seal plate by means of adjusting bolts in APH.
7Re-visioning / Repairing of air seal housing of guide bearing of APH.
8Replacement of asbestos rope of required size of manhole of APH.
9Cleaning of heating elements of APH and coils of SCAPH by air /water.
10Alignment of electric motor/air motor with reduction gear box of air pre-heater.
11Replacement of gear box of air pre-heater.
12Servicing of gear box of air pre-heater.
13Cleaning and refilling of oil in gear box of APH.
14Servicing/overhauling of lubricating oil pump of guide bearing/support bearing of APH.
15Repairing of oil/ Water value lube oil system of size 25mm. to 40mm.
16Replacement of oil/ Water valve lube oil system of size 25mm. to 40mm.
17Replacement of lube oil pump of guide / Support bearing by new/ repaired.
18Replacement of pipe of size 10mm. to 40mm. dia. Of air/ water / oil line.
19Servicing / overhauling of over running clutch system of APH.
20Cleaning of filter of lube oil system of guide bearing / support Bearing of APH.
21Servicing and Cleaning of Coolers of lube oil system of guide Bearing / support Bearing of APH.
22Replacement of fluid coupling.
23Replacement of guide Bearing of Air Pre-heater.
24Checking of Gear Box of APH.
25Cleaning of guide Bearing and their housing.
26Cleaning of support bearing and their housing.
27Repairing and reconditioning of centre section surface beneath guide bearing and casting the refractory.
28Leveling of sector plates of Hot end/ cold end.
29Servicing/Replacement of spring hanger support, anchors and restraints of boiler (Critical piping and ducts) and resetting the spring hangers on cold set valves.
30Servicing/Replacement of Scanner air fan including filters, Discharge dampers and Emergency damper.
31Cleaning of air filter ofscanner air fan
32Replacement/Servicing/Repairing of Burner Tilting Mechanism.
33Servicing/Repairing/Replacement of oil gun guide assembly at AB,CD and EF elevation.
34Servicing of secondary air damper in wind box (L&R).
35Replacement/Servicing of Igniter guide assembly at AB, CD and EF elevation.
36Repairing of wind box (L&R)./welding Chucker plate / firing floor /steel board
37Cleaning of Aerofoil of secondary air duct to wind box (L&R).
38Repairing/Servicing of scanner guide assembly.
39Cleaning of wind box (One wind box treated as one job).
40Running welding of boiler except fin welding
41Repairing of oil gun.
42Fabrication and installation of damper location plates
43Strengthening with hard facing connected supported walls of boiler as and when required
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail