|
| 1 | Item No. 1 : Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means DSR I.No. 21.02 |
| 2 | Item No. 2 : Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.to 3.0 m) By etc.DSR I.No. 21.04 |
| 3 | Item no. 3 : Providing and filling in the foundation with sand ,of approved quality inlcuding watering compacting etc.complete, |
| 4 | Item No. 4 : Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. DSR I.No. 21.38 |
| 5 | Item No. 5 : Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)DSR I.No. 24.01 |
| 6 | Item No. 6 : Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for RCC work in founcdation like raft,strip founadation,grillage and footings of RCC coloumns and steel stanchions etc.ncluding bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided etc. |
| 7 | Item No. 7 :Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for RCC coloumns as per detailed design and drawing or as directed inlcuding steelcentering and Steel centering, formwork, laying / pumping, compacting finishing the fprmaed surface with motor 1:3 etc. |
| 8 | Item No. 8 :Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for RCC beam and lintel as per detailed design and drawing or as directed inlcuding steelcentering and Steel centering, formwork, laying / pumping, compacting finishing roughening them if special finish is to be provided etc. |
| 9 | Item No. 9 :Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for RCC slabs and landing lintel as per detailed design and drawing or as directed inlcuding steelcentering and Steel centering, formwork, laying / pumping, compacting finishing roughening them if special finish is to be provided etc. |
| 10 | Item No. 10 : Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. DSR I.No. 26.33. |
| 11 | Item No. 11 : Providing second class Burnt Brick masonary with conventional/I.S. type brick in cement mortor 1:6 in foundation and plinth of inner walls in plinth external walls inlcuding bailling out water manually,strikling joints on unexpected faces,ranking out joints etc. |
| 12 | Item No. 12 : Filling in plinth and foolrs with contarctor materials/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compacting etc. |
| 13 | Item No. 13 : Providing internal cement plaster 6 mm thick in a single coat in cement mortor 1:4 without neeru finish to concrete surface in all position including nscoffolding and curing etc.complete. |
| 14 | Item No. 14 : Providing internal cement plaster 20 mm thick in a single coat in cement mortor 1:4 without neeru finish to concrete, brick surface in all position including nscoffolding and curing etc.complete. |
| 15 | Item No. 15 : Providing and applying priming coat on concrete/masonary/abseots cement plaster surface inlcuding scoffolding if necessary preparing the surafce by thoroughly cleaning oil etc. |
| 16 | Item No. 16 : Providing and applying two coat of water proof cement paint of approved manufacturing and of approved colour to old plaster if necessary cleaning etc. |
| 17 | Item No. 17 : Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking rubble obtained by blasting.(Hand broken).DSR I.No. 50.55 |
| 18 | Item No. 18 : Supplying soft murum at the road site, including conveying and stacking complete. DSR I.No. 2.29b |
| 19 | Item No. 19 : Spreading 80/40 mm metal for road work including sectiong etc complete as directed by Engineer in Charge(SSR.I.No.50.58 |
| 20 | Item No. 20 : Spreading hard murum/ soft murrum/ gravel or kankar for side width complete DSR I.No. 2.30 |
| 21 | Item No. 21 : Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.DSR I.No. 50.61 |
| 22 | Item No. 22 : Providing and fixing made Hydraulic pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 MM thick in M-40 grade of approved size and shape for city street small /medium market roads,low volume roads utillity cuts o arterial roads etc.as specified and as per IS 15658:2006 including cost of all materials etc. |
| 23 | Item No. 23 : Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water,Steel centering,formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)DSR I.no. 24.08 |
| 24 | Item No. 24: Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of contractor, work completion and liability period etc, having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25m) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages / symbos etc with approved colour shade paint complete, on M.S. angle of size 3 x 35 x 3 mm frame with properly cross braced M.S angle of size 35 mm x 35 mm x 3 mm duly painted including two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling transportatiion, and labour etc complete Spec. No. As directed by engineer in charge MORTH 801 S.S.R. I.No. 6.96, Page. No. 79. |
| 25 | Item No. 25 : Roayalty Charges |
| 26 | Item No. 26 : Providing Quality Control Test1)CC cube Test |
