Military Engineer Services-MES has published Tender For Repair To Roof Treatment And Allied Pre-Monsoon Maintenance Including Structural Repair And Other Repairs To Distress Concrete To Certain Building At Zone A And B Under Age Br Ii In Ge Gomantak Vasco. Submission Date for this Tender is 05-06-2023. Building Work Tenders in vasco Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-May-2023 | amendment1 | Date | 05-06-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plastering on brick or stone walls including raking out joints hacking for key scrubbing down with water etc inside shaftsall as directed by Engr-in-Charge. |
| 2 | Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement. |
| 3 | M&L for one coat of alkali resistant primer on plasteredsurfaces over 3mm thick Birla white wall care putty and applying two coat of oil bond distemper and preparation the surfaces complete all as specified and directed |
| 4 | M&L for 15 mm thick plastering on brick/concrete surfaces in cement mortar 1:4 using water proofing compound and finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound shall be not measured & not paid separately. |
| 5 | M&L for roof and wall treatment applying PU & Acrylic based Elostomeric Coat in UV shafehaving OVOC coating apply two coat to project of roof and for wall Anti-Dampness & Anti Efflorensence Hydroloc any weather condition External & Internal wall treatement over clean plastered surface complete all as specified & directed by Engr-in-charge. Make Asian/Dr fixit/Berger |
| 6 | M&L forApply a coat of SmartCare Primero with dilution ratio of 1:1 with water maintain a coverage of 100 sq.ft/ltr |
| 7 | Providing and applying 20mm thick ready mix external sand faced cement plaster with neat cement rendering at all locations in two coats of masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete. |
| 8 | Preparation of new surface of wall by scrapping / rubbing, applying two coats of Advanced Anti-algal Weather Proof 100% Acrylic smooth ,emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane. Make: Asian paints Ultima Suprema+ Damp proof or eqlt |
| 9 | Chipping off existing loose, damaged concrete from RCC members of all affected RCC Columns, beams, slabs and chajjas on external and internal facades etc beyond main r/f.(if required in the opinion of the consultant), carefully with chisel and hammer including relieving structural members such as column, beam and slabs of their superimposed load partially or fully by provision of adjustable steel props, frames etc. Providing and applying "Rusticide SS" Rust passivator or equivalent as specified in the Brand names to existing r/f bars including wire brushing of r/f, cleaning, washing of concrete etc complete as directed. Providing and applying two coats of rust preventor slurry made out of "Polyalk Fixoprime" or equivalent as specified in the brand names and cement in proportion 1:1.5 to exising r/f bars as directed complete. Providing and applying bonding coat of slurry made out of "Polyalk EP" or equivalent as specified in the brand names and cement in proportion 1:1 to concrete and r/f substrates complete as directed. Providing and applying "Polyalk EP" or equivalent as specified in the brand names. Polymer modified cement mortar in required porportion (1:5:15) to RCC members including hand packing, curing and making the surface rough for plastering. |
| 10 | M & L 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed |
| 11 | M&L for 3mm thickputty on ceilling surfaces and applying two coat of oil bond distemper new plaster surface and preparation the surfaces complete all as specified and directed |
| 12 | Preparation of old surface of wall by scrapping / rubbing, applying two coats of Advanced Anti-algal Weather Proof 100% Acrylic smooth ,emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane. Make: Asian paints Ultima Suprema+ Damp proof or eqlt |
| 13 | M/LReplacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed by Engr-in-Charge. |
| 14 | Providing and laying Super fluid microconcrete-Roffe crete repairs(or equivalent as specified in the list of brand names) in beam bottoms, columns, slabs etc. including mixing with 5mm to 10mm size aggregates, water proof plywood/steel plate shuttering, pouring, tamping, consolidating, curing etc complete as per manufacturer"s specification and consultant"s instructions. The item shall be paid on actual consumption of microconcrete. |
| 15 | M/L Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, column ,cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 16 | M&L for applying two coats of Anti fungal paint-APEX wting over a coat of primerto match the existing colour including preparation of newly plastered surface of wall. |
| 17 | Material and labour for one coat of oil bound distemper on wall including preparation of old plastered surfaces complete all as specified and directed. |
| 18 | Complete removal of existance treatment of wall andapplying a layer of 3mm thickwall care putty in two coat on wall and applying two coat of oil bond distemper complete all as specified and directed |
| 19 | Complete removal of existance treatment of ceiling andapplying a layer of 3mm thickputty in two coat on ceilling surfaces and applying two coat of oil bond distember complete all as specified and directed |
| 20 | Material and labour preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Engr-in-Charge. |
| 21 | Material and labour for one coat of synthetic enamel paint on old painted steel surface of any description not otherwise described over 10cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L one coats of exterior emulsion paint ( Apex or weather coat)or water proof, white or tintedon old surfaces of wallsincluding prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified . |
| 23 | Dismantling floor, hearth or wall tilingalso in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 24 | M&L joint free Non Skid ceramic plain white tiles (also in patches ) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately). |
| 25 | M&L glazed ceramic white tiles 350x250x 6 to7 mm thick/450x350x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 26 | M&L Vitrified Ceramic tiles 9 to 10 mm thicklight shade (alsoin patches) square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM1:4 complete all as specified and directed. |
| 27 | M&L polythelene film black 50 micron laid in floor all as specified and directed |
| 28 | S&F (in repairs)Vitreous china, white,Squatting pan ,"Orrisa" pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitngall as specified |
| 29 | S&F in repair PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices.approved by GE |
| 30 | S&F ( in repairs) Low level flushing cistern 10 ltr capacity moulded fromvirgin poly propylene Make Parry ware Brand Slimline Single flush includingprovision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed. approved by GE |
| 31 | S & F PVC connections 15mm size with PTMT nuts of length 450mm. |
| 32 | S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mmincluding CI cantilever brackets, 32 mm diabrass Chromium plated waste fittingswith long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified fixed in repairs . |
| 33 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern),white ( flushing cistern and flush pipe) complete all as specified |
| 34 | S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copperalloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Markedof other specified. approved by GE |
| 35 | S & F 15mm Chromium plated , fancy type,Stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairapproved by GE |
| 36 | S&F ( in repairs) CP Angle stop cock( two way)screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed C complete all as specified .approved by GE |
| 37 | S & F 15mm Bib taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE |
| 38 | S & F 15mm pillar taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE |
| 39 | S&F ( in repairs)Bidet spray ( Health faucet) with 1 metreextendable metal tube and holdercompleted all as specified and directed. |
| 40 | S & F in repair brass chromium plated shower rose with shower arms with swivel joints including fixing to steel pipe or union, complete all as specified and directed. |
| 41 | Supply and fixing in repair Towel rail of brass chromium plated 900mm longwith and including chromium plated brass screws wooden / plasticcleatsapproved by GE |
| 42 | S&F ( in repairs) CP Brass Toilet paper holderfixed to walls with chromium plated (CP) brass screws. complete all as specified |
| 43 | Material &Labourfor Cutting chases, pinning in. making good to facings where equired and pointing in cement mortar 1:3 to ends or edgesand cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth. |
| 44 | S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed. |
| 45 | S&F grating doom type 100mm dia of stainless steel (min wt 25gms) |
| 46 | M&L ( in repairs)600mm x 450mm or 900mm x 550mmmirror 5.5mm thick edes less of selected quality glass, mounted on 6 mm thick inclunding fixing wall mounted scrueand cleator AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified. |
| 47 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) |
| 48 | M & L cement concrete tiles 20cm x 20cm x 20mm thick, with grey cement and pigment set, jointed and pointed in near cement slurry in floors over woven fibre glass mesh min 40 GSM of size 2MMx2mm fixed on APP 15mm screed bed in CM ( 1 : 4) |
| 49 | Taking down existing treatment along with PCC padding of any thickness and roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete. |
| 50 | Filling and reinstating of separation cracks: Opening the separation cracks at the junction of RCC and masonry where ever directed and instructed into "V" Grooves 2 to 3" from either side of the cracks by carefully marking areas to be opened up using a cutting machine and skillfully/carefully chiseling with a well sharpened chisel and hammer as directed including wire brushing and washing of concrete substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the consultant as instructed and directed. Moistening the cracks, provinding and applyin priming/bonding coat of slurry made out of "Polyalk EP" and cement (or equivalent as specified in the list of brand names) in proporiton 1:1 to surfaces prepared as instructed and directed. Filling the cracks/grooves by providing and applying "Polyalk EP" Polymer modified cement mortar (or equivalent as specified in the list of brand names) in proporiton 1:5:15 (Polyalk EP: Cement: Graded Sand/Quartz Sand) on the prepared surfaces and finishing it in the level with the existing plaster including hand packing, curing and making the surface similar to the external plastering using wooden floats/punch etc. complete all as specified and directed. |
| 51 | Drilling holes of required sizes upto 16mm dia and up to 50mm depth in concrete and cleaning the same as directed. Provinding and fixing 12mm dia aluminium/PVC injection nipples and securing the same as directed and Providing and injeciting cementitious grout using CEBEX-112 additive of "FOSROC" at the rate of 225 grams per bag of cement and using suitable mechanical gun/pump including mixing etc complete. |
| 52 | M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with and including integral waterproofing chemical PIDIPROOF LW mixed in proportion 200 millilitre per 50 Kg cement of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID)as in padding on roof surface for correcting / making proper slope on roof, surface finished fair and even without using extra cement complete. |
| 53 | Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement. including mixed with water proofing compound (as per manufacturers instructions)on concrete surfaces all as directed by Engineer-n-Charge. Note : Water proofing compund measured and paid separately |
| 54 | Suppy only liquid water proofing(Compound) all as specified and directed. |
| 55 | M&L for laying water proofing treatment using 4mm thick APP modified membrane consisting fiver layers membrances with features as specified weighing not less than 3.5 kg per sqm reinforced with non woven polyester fiber @ 160gm/Sqm laid over a coat of cold applied bituminous primer @ 0.40 kg/sqm by torching the membrance and sealing the over lap by 100mm length side and 150mm width side all as per manufacturer instructions including joints and changes in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement curved wel before laying membrance, all as per manufacturer instructions and to the satisfaction of Engr-in-Charge. Note: (i) Irrespective of lap the net covered area will only be measured for payment. (ii). Note: rate is inclusive of APP membrane, SBR Latex (iii)Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat .Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD OR EQUAVALENT. |
| 56 | Material and Labour for cleaning of bushes/plants/vegetations on walls/roof/chajjas/ceilings and removing/digging out the roots filling the hole and including applying antigrowth chemical and making good surfaces with cement concrete type, B1, 1:3:6, using 20 mm graded stone aggregate all as directed by Engr-in-Charge... |
| 57 | S&F in repair,CP Glass shelf (22x6"),Cat part no- ES01A,,make-Nixo/Hilife/Cera/Prayag |
| 58 | S&F in repair, CP corner shelf(12"x12") Cat no-ES03A,Make-Nixo/Hilife/Cera/Prayag |
| 59 | Disconnecting existing tanks Exc 250 & n exc 500 capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as directed by Engr-in-Charge. |
| 60 | Disconnecting existing tanksExc 500 & n exc 1000 , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in positionall as directed by Engr-in-Charge. |
| 61 | Dismantling of PVC existing water tank of exc 500 ltrs & n. exc 1000 ltr capacityand removing to site |
| 62 | Dismantling PVC water tanksExc 250 ltrs but not 500 ltrs capacity and removing to site |
| 63 | S & F1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991and removing from site complete. |
| 64 | S & F500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991and removing from site complete. |
| 65 | Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed |
| 66 | Taking up or down 25 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed |
| 67 | Refixing old 20mm dia steel tubing and connection in new or old positions (walls, ceilling, floors etc.) |
| 68 | Refixing old 25mm dia steel tubing and connection in new or old positions (walls, ceilling, floors etc.) |
| 69 | Supplying and laying of 20 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11with all fittings on walls/ceiling or laying in floors complete all as specified. |
| 70 | Supplying and laying of 25 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings on walls/ceiling or laying in floors complete all as specified. |
| 71 | Supply & Fixing in repair Ball brass valves20mm dia , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as directed by Engr-in-Charge. |
| 72 | Supply & Fixing in repair Ball brass valves 25mm dia , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as directed by Engr-in-Charge. |
| 73 | S&F PVC (SWR) 110 mm dia pipe in repair for roof drain pipe and fixed to wall with bracket including proper packing with CM 1:3 incl removed old UNSV pipe all as directed |
| 74 | S & F in repairPVC (SWR) bend, 110mm dia complete all as specified and as directed by Engr-in-charge. |
| 75 | S & F in repairPVC sintex cover for 500 ltr / 1000 ltr PVC tank complete all as specified and as directed by Engr-in-charge. |
| 76 | Dismantling timber scantlings40 sq. cm and over in any position complete all as specified and directed |
| 77 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeFe 290 Gde- E-165) |
| 78 | M&L preparation of new steel surfacesof any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamelled paint over one coat of red oxide Zinc chromeprimer complete all as specified. |
| 79 | Dismantling reinforced Cement Concreteof any description and in any Position not otherwise specifically provided for, complete all as specified and as directed. |
| 80 | S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa,and finished with resin coat on both surfacesas in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified. |
| 81 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section- Earthwork) distance of 3.00-5.00Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
