Public Works Department-PWD has published Tender For Construction Of Three Nos Of Lecture Hall At Igmc Shimla (Two Nos In Medical College And One No In Floor Of Block-E) (Sh- Acoustic Work, Platform, Painting And Distempering Etc.).. Submission Date for this Tender is 18-05-2023. Building Work Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all leads and lift: Area 3 sq. metres and below |
| 2 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etc. complete including carriage of materials in all leads and lifts. |
| 3 | Providing and fixing 19mm thick Commercial Board shutters for Cup boards i/c fixing with nickel plated piano hinges with screws etc complete including carriage of materials in all leads and lifts. |
| 4 | Providing and fixing 25mm thick Hard ply board of approved qualityand make fixed in benches and plateform etcwith butt joints andnails and screws etc. complete as per direction of Engineer- in- Charge Complete including carriage of materials in all leads and lifts. |
| 5 | Providing and fixing 25mm thick plain skirting with butt jointing and screws (frame work and cover fillets to be measured and paid for separately) with in 1st class deodar wood including carriage of materials within all leads and lifts.. |
| 6 | Providing and Fixing factory made UPVC door and window frame including shutters, made of UPVC exturded sections, of size aproved by engineer in charge with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plasticbracketsandstainlesssteelscrews,reinforcinghingeside vertical of the frames with PVC profile including double glass seald glazing in window, ventilators & partition etc. with6mm thick clear toughned glass +air gape of aproved width + 5 mm inside clear toughned glass complete as per architectural drawing complete and a blind arrangement between two double glass operated threw rotating knob all complete as per manufacturer"s specification and direction of Engineer-in-charge.including carriage of materials within all leads and lifts.. |
| 7 | Providing and Fixing ‘APHONY FIBRETTE ‘ tiles made of Wood Fibre 1mm width cement composites 15mm thick with an option of colours as per the choice of the Architect/ person in charge of size 595x595 mm has excellent noise absorption of 1 NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400 Kg/ m3, meets stringent Fire Ratings ASTMD- 876 and Fire Class -1 as per BS 476 part 5 and 6,Class P-not easily ignitable as per BS-476- Part 5 (Ignitability for material).This is applicable for core and class 1 as per BS 476-Part 7 (Method for classification of surface spread of flame) , weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60 digree Celsius(140 digree Fahrenheit) for 15 days with no deterioration. Conforms to En 131682001 and are RoHS Complaint. Can be installed on T24 grid system of 0.6mm thick Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm web minimum 27mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, Specially designed for Acoustic Vibration management and long life 50mm 1000 GSM thick absorbwool tested as per Fire Retardant ASTMD 635- 1991 and IS 15061-2002 for excellent results. including carriage of materials within all leads and lifts.. |
| 8 | Providing and Fixing ‘APHONY FIBRETTE ‘ tiles made of Wood Fibre 1mm width cement composites 15mm thick with an option of colours as per the choice of the Architect/ person in charge of size 595x595 mm . Has excellent noise absorption of 0.70 NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400 Kg/ m3, meets stringent Fire Ratings ASTMD-876 and Fire Class -1 as per BS 476 part 5 and 6,Class P-not easily ignitable as per BS-476-Part 5 (Ignitability for material).This is applicable for core and class 1 as per BS 476- Part 7 (Method for classification of surface spread of flame) , weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60 digree Celsius(140 digree Fahrenheit) for 15 days with no deterioration. Conforms to En 131682001 and are RoHS Complaint and can be installed directly on beams. |
| 9 | Providing and Fixing Stretch Fabric to be mechanically fastened on the Walls. Acoustical infill of absorbwool 10mm which is adhered to the acoustical panel on the front side. Then 12mm/20mm Vinyl tracks are screw fixed on existing Plywood. Then the fabric is stretched over the Vinyl tracks. The installed system should provide NRC OF 0.74. Fabric colour as per as per direction of engineer in charge : To be installed directly on existing wooden Panel. including carriage of materials within all leads and lifts.. |
| 10 | Providing and Fixing Stretch Fabric System on G.I studs 2400mm X 50mm web, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing 50mm thick insulation. ’Aphony Fibrette’ 600x1200x20mm tile with NRC 1.00 to be mechanically fastened on the G.I Studs. Acoustical infill of absorbwool 10mm which is adhered to the acoustical panel on the front side. Then 12mm/20mm Vinyl tracks are screw fixed on to the 6mm Ply and Acoustics panels. Then the fabric is stretched over the Vinyl tracks. The installed system should provide NRC OF 1.00.Fabric colour as per Architect choice-Ref attached specifications for more details. To be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of HIMALYAN ACOUSTICS. 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061- 2002 for excellent results. including carriage of materials within all leads and lifts.. |
| 11 | Providing and Fixing of ‘’ Woodlot ’’ FR Grades 2430x131x16mm made of exterior grade HDF backed with acoustical Fleece providing sound absorption of 0.88 NRC as per ISO 354.To be installed with 15mm Aluminium profile conforms to Aluminium Alloy 6063-T 6.Temper As per BS:1474-1987 and G.I Lock in clips on the back of tongue and Groove system. The density per panel is 750-800 kg/m3.The panels come with tongue & groove for seamless patterns,4-28mm Groove and visible panel. These slats are made from acoustical fibreboard with linear perforations for excellent uniformity. The perpendicular holes are available on the back of panel which are covered by black acoustical fleece. Achieves sound reduction of 0.88 NRC. To be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life. 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results. |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position: (a) Second Class Deodar Wood including carriage of materials in all leads , liftsand as per directions of the Engineer-in-Charge. |
| 13 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc .including carriage of materials with in all leads and lifts. (a) Second Class Deodar Wood |
| 14 | Steel work in built up tubular(round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including carriage of materials within all leads and lifts. |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work on Steel complete including carriage of materials within all leads and lifts. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work on Steel complete including carriage of materials within all leads and lifts. |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on old work on wood complete including carriage of materials within all leads and lifts. |
| 18 | Polishing two or morecoats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts. |
| 19 | Polishing one or morecoats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
