|
| 1 | Dismantling wooden boarding, any description , fixed in any position with nails complete all as specified and directed. |
| 2 | S&F20mm thick 2nd class soft wood boarding clean sawn as in eaves board fixed with nails complete all as specified and as directed. |
| 3 | S&F 15 mm thick 2nd class soft wood clean sawn boards or planks, width not exceeding 25cm as in wall boarding complete all as specified and directed. |
| 4 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall, complete all as specified and directed. |
| 5 | M&L for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work, complete all as specified and directed. |
| 6 | Dismantling timber scantling 40 sqm and over in section in any position as in unframed/framed work complete, all as specified and as directed |
| 7 | M&L 2nd class soft wood (kail) as in scantling clean sawn, complete, all as specified and as directed. |
| 8 | Dismantling of wall and ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and as directed. |
| 9 | S&Fwooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and not exc 25 sqcm fixed with nails etc complete, all as specified and as directed. |
| 10 | S&F 2nd classsoft wood plain clean sawn fillets square, rectangular or triangular in section exc 6 & not exc 13 sqcm secured with nails or brads complete all as spd and directed |
| 11 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling, complete all as specified and directed. |
| 12 | S&F aluminiun anodised snap grid ceiling of frame size 600x600mm,main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer\"s instructionsand as directed by the Engineer -in- Charge. |
| 13 | Dismantling plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof coverings complete, all as specified and as directed |
| 14 | S&F Galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coatch screws and washers in roofs, 0.63 mm thick m Gde-o quality, with 120 grms/sqm zinc coating and Gde \"B\" (i.e 12.5 mm ) corrugation, complete, all as specified and as directed |
| 15 | S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade \"O\" with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers complete all as specified and as directed |
| 16 | M&L PBS roll 20 mtr long and 100 cm wide type-III weight 40 Kg per roll (As per sample) complete all as specified and directed. |
| 17 | M & L preparation of newsteel and iron surfaces of any descriptionover 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer over newly prepared steel surface. |
| 18 | S&F aluminium window openable /fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminum section of size 47.62 x 44.45 x 1.5 mm thick includiing jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminum strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete all as spcified ad as directed. |
| 19 | S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame,glazed with 5.5mm thick tinted glassincluding rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size,where requireddouble action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and as directed:- |
| 20 | Taking down aluminum door/windows including frame if required and repair the same including repair of rubber bidding,aluminum clip,adjusment of glasses,repair/ repalacement of floor spring or hydraulic door closer with oiling or greesing etc.ajusment of horizontal, vertical or middle style . complete all as till the satisfaction of Engr-in-charge. |
| 21 | Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 22 | Dismantling floor, hearth or wall tiling including CM bedding (but not backing), skirting, complete all as specified and directed. |
| 23 | M&L 25 mm thickplain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair all as specified and as directed. |
| 24 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles and including 15mm thick screed bedin cement mortar 1:4 ,complete all as specified and directed |
| 25 | M&L Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick bedding layers in cement mortar 1:3 complete all as specified and directed. |
| 26 | M&L for Vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slury and pointed in white or coloured to match the tiles over 15 mm thick screed bed or bedding layer of mortar 1:4 for layig floor finish complete all as specified and as directed |
| 27 | M&L Vitrified Ceramic light shade tiles 10 mmthick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed inneat cement slurry and pointed incement to match white or colouredand including 10mm thick bedding layers in cement mortar 1:3 complete all as specified and directed. |
| 28 | M&L 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring finished even and smooth with out using extra cement complete all as specified and as directed. |
| 29 | Providing 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection/ hard standing laid in alternatebays (not exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthrough out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weightcomplete all as specified. |
| 30 | Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar |
| 31 | M&L for Granite (of any type) work ,18 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thcik screed bed or bedding layer in CM 1:3 complete all as specified and directed. |
| 32 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 33 | M&L for brick work with sub class \"B\" bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 34 | M&L for walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 and pointed flush the surface in contact with earth in same mortor as the work proceeds including necessary weep holes at 2 metre c/c (staggered) as in retaining wall, complete all as specified and directed. |
| 35 | Description all as per Srl item No. 34 above but except stone. |
| 36 | Racking out joints / pointing to random rubble masonry in CM 1:4, complete all as specified and directed. |
| 37 | Taking downcement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 38 | M & L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out uing extra cement, complete all as specified and directed. |
| 39 | M&L for Rendering 10mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:4,even and smooth w/o using extra cement, complete all as specified and directed. |
| 40 | M & L preparationof new plastered surface and applying two coat of cement base paint of approved tint/ colour on wall including cornices, pilasters complete all as specified and directed. |
| 41 | M & L preparationof new plastered surface and applying applying two coat of distemper oil emulsion, white or tinted over a coat of primer, complete all as specified and directed. |
| 42 | Taking down chowkats or framesnotexc1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed. |
| 43 | Taking down chowkats or framesexc1.5 Sqmbut not exc 4.00 Sqm each( without taking off shutters from the frames), complete all as specified and directed. |
| 44 | Taking down shutters of any description not exc 1 sqm each, complete all as specified and directed. |
| 45 | Taking down shutters of any description exc 1sqm but not exc 2 sqm each, complete all as specified and directed. |
| 46 | S&F 2nd class soft wood plain, solid chowkats and frames wrought framed rebated on the solid,rounded or chamfered put together with glue, pinned at joints complete, all as specified and as directed. |
| 47 | S&F 35 mm thick 2nd class soft woodplain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed. |
| 48 | S&F 35 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a) complete all as specified and as directed . |
| 49 | S&F 30 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (b) complete all as specified and as directed . |
| 50 | S & F 18/19 mm thick preliminated particle interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screwed to timber frame work as in shelves in kitchen, almirah, cup boards complete all as specified and directed. |
| 51 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete, all as specified and as directed |
| 52 | S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete, all as specified and as directed. |
| 53 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specfied and as directed |
| 54 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing |
| 55 | S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm complete, all as specified and as directed |
| 56 | S&Fbutt hinges, medium weight cold rolled, mild steel of size 75 mm complete, all as specified and as directed |
| 57 | S&F150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified |
| 58 | S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified |
| 59 | S&F150 mm aluminum alloy handles, fabricated type, anodised complete all as specifed |
| 60 | S&F100 mm aluminum alloy handles, fabricated type, anodised complete all as specifed |
| 61 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixin glips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed |
| 62 | S&F Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair. |
| 63 | S & F in repair140mm floor door stopperof aluminium alloy body and tounge, anodised, with hard drawn steel spring ,fixed in floor complete as all as specified and directed. |
| 64 | Hacking out old broken glass (any thickness size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed incl S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete, all as specified and as directed |
| 65 | M&L for preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and asdirected. |
| 66 | S & F in replacement curtain rod 20 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and directed . Note:- The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account. |
| 67 | Taking up or down steel tubing 15/20 mm diaand connections and stacking neatly for offering credit, complete all as specified and directed. |
| 68 | Tubes,medium grade galvanised, 15 mm borewith all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 69 | Tubes,medium grade galvanised, 20 mm borewith all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 70 | M&L for removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed. |
| 71 | M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed \"SNAPON\" pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and directed. |
| 72 | M&L for lagging to pipes of internal dia 20 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed \"SNAPON\" pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and directed. |
| 73 | S&F in repair, plate rack of overall size 24 x 24 x 10 Inchmade out of 0.63mm thick stainless steel sheet complete all as specified and directed. |
| 74 | S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and conneting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm , complete all as specified and directed. |
| 75 | S&F in repair Waste pipe 40 mm for SINK with coupling, complete all as specified and directed. |
| 76 | S & F corner glass shelf 300mm with chromium plated guard rails, complete all as specified and as directed |
| 77 | S&F in repair glass shelf 500x60mm (with ABS Brackets), complete all as specified and directed. |
| 78 | S&F in repair stainless steel Soap Dish complete all as specified and directed. |
| 79 | S&F single lever CP wall mixture with telephonic type 15mm bore, complete all as specified and directed . |
| 80 | S&F in repairsbrass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges. |
| 81 | S&F in repairs CP brass shower rose with swival joints complete fancy type for 15mm bore pipe, fixed as in repairs,complete all as specified and directed. |
| 82 | S&F in repair 15 mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm dia and confirming to IS-781-1977 , complete all as specified and directed. |
| 83 | S&F in repairs 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 84 | S&F in repair wash hand basin vitreous china size 550x400mm white flat backincluding CP pillar tap heavy dutyas approved by GE ,waste,chain plug,pvc connection, pvc waste pipe complete all as specified and directed. |
| 85 | S&F in repair Waste pipe 32mm for WHB with coupling, complete all as specified and directed. |
| 86 | S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot or Cold\" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed. |
| 87 | S&F in repair CP Mixer single lever basin mixer fancy type for WHB / Sink with double action for hot/Cold water complete all as specified and as directed. |
| 88 | S&F in repair 600 mm x 450 mm looking mirror with PVC frame of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 89 | S&F in repair CP towel ring ,complete all as specified and directed. |
| 90 | S&F in repairsvitreous china squatting pan, Orissa pattern of size 580mm x 440mm white with including foot rests and including CI \"P\" trap but excluding flushing cistern and flush pipe but including provision of PCC 1:4:8 type D-2 bedding, complete all as specified and directed. |
| 91 | S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excludingflushing cistern and flush pipe), complete all as specified and directed. |
| 92 | S&F PVC flushing cistern, 10 ltr capacity low level, white, valve less syphonic action type, with inlet, ball valve, float and handle including bracktes, pvc 32 mm dia flushing pipe for cistren etc complete fixed in repairs complete all as specified and directed |
| 93 | S&F in repair PVCwater closet seat cover,black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for EWC fixed as in repairs. |
| 94 | S&F in repair chromium plated toilet paper holder fixed with brass screw, complete all as specified and directed. |
| 95 | S&F in repairs chromium plated Jet spray (Butterfly) with 1Mtr tube, complete all as specified and directed. |
| 96 | S&F for hand shower (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed |
| 97 | S&F in repair PVC connection of PTMT nuts 15x600mm long, complete all as specified and directed |
| 98 | S&F in repair PVC connection of PTMT nuts 15x450mm long, complete all as specified and directed |
| 99 | S&F in repairPVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement, complete all as specified and directed |
| 100 | S&F in repair grating doom 100 mm dia with waste hole of PTMT.(Minimum weight 25 gms), complete all as specified and directed |
| 101 | Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia all as specified and directed. |
| 102 | PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 110mm as in rain water pipe, complete all as specified and directed |
| 103 | M&L in repair PVC (SWR) pipe single socketed in any length with rubber ring joint fixed with wall of 75mm, complete all as specified and directed |
| 104 | M&L in repair PVC SWR branch piece single equal or unequal 110mm, complete all as specified and directed |
| 105 | M&L in repair PVC SWR branch piece single equal or unequal 75mm, complete all as specified and directed |
| 106 | M&L in repair PVC(SWR) bends any radius 110mm complete all as specified and directed. |
| 107 | M&L in repair PVC (SWR) bends any radius 75mm complete all as specified and directed. |
| 108 | Dismantling wrought iron or mild steel work of any description not other wise provided, Complete all as specified and directed. |
| 109 | S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0, complete all as specified and directed. |
| 110 | Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight210 gram) etc),incl dismantling existing water tanks, complete all as specified and as directed by Engr-in-Charge. |
| 111 | Description all as per item No 111 above but 500 ltr capacity |
| 112 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe of size 15 mm dia all as specified and as directed |
| 113 | S&F ball in repair valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe of size 20 mm dia all as specified and as directed |
| 114 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc andhoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirtetc from tanks and from mouths of circulating pipes etc complete (capacity of tanksexc 250 ltr and n exc 500 ltrs) including writing \" date of cleaning \" and next due date in bold capital letters Exc 4 cm in height all as directed . |
| 115 | Description all as per item No 115 above but 1000 ltr capacity |
