|
| 1 | Earth work in excavation by mechanical means(Hydraulic excavator)/Manual means over areasexceeding depth 30CM and width 1.5M |
| 2 | Supplying and filling in plinth with sand underfloors, including watering, ramming,consolidating and dressing completed |
| 3 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derivedfrom natural sources. |
| 4 | Providing and laying in position specified gradeof reinforced cement concrete, excluding thecost of centering and shuttering and finishingand reinforcement work 1:1.5:3 |
| 5 | Centering and shuttering including strutting,propping etc. and removal of form work forfoundations, footings, bases of columns etc. formass concrete |
| 6 | Steel reinforcement for R.C.C. work includingstraightening, cutting, Thermo-MechanicallyTreated of grade Fe-500D or more |
| 7 | Half Brick work 7 cm thick with common burntclay F.P.S. (non modular) prop. 1:4 |
| 8 | Brick work with common burnt clay selectedF.P.S. (non modular) bricks of class designation7.5 in exposed brick work including makinghorizontal and vertivcal grooving from groundlevel to plinth level |
| 9 | Structural steel work in single section, fixed withor without connecting plat, including hoisting,fixing inposition with a coat of primer |
| 10 | 62 mm thick cement concrete flooring withconcrete hardener topping, |
| 11 | Brick flat soling |
| 12 | Providing and laying vitrified floor tiles indifferent sizes (thickness to be specified bymanufacturer and size shall be 600X600 MM |
| 13 | Providing and fixing plain multipurpose cementboard(Hight pressure with suitable screws forcement particle board in ceiling 6mm thickcement fibre board |
| 14 | Providing and fixing precoated galvanised ironprofile sheets (size, shape and pitch ofcorrugations as approved by Engineer-in-charge |
| 15 | 12 mm cement plaster of mix :1:4 |
| 16 | Distempering with 1st quality acrylic distemper(ready mixed) having VOC content not less than50Gms/ litre, of approved manufacturerspecifications , Two coats on new work |
| 17 | Applying one coat of water thinnable cementprimer of approved brand and manufacturer onwall surface |
| 18 | Finishing walls with two coats Acrylic Smoothexterior paint of required shade : over andincluding priming coat of exterior primer @2020kg/10sqm. |
| 19 | Providing and fixing glazing in aluminium door,window, ventilator shutters and partitions etc.with EPDM rubber/ neoprene gasket etc.complete as per the architectural drawings andthe direction of Engineer-in charge . With floatglass thickness 5mm |
| 20 | Providing and fixing anodised aluminium grill(anodised transparent or dyed to required shadeaccording to IS: 1868 with minimum anodiccoatings of grade AC-15 fixed to existing windowframe with CP brass/ stainless steel screws@200mmc/c cutting the grill to proper openingsizes . |
| 21 | Prelaminated particle board with one sidedecorative and other side balancing laminations,flat pressed 3 layers & graded medium densitygrade-I, type-II conforming to IS: 12823 25mmthick |
| 22 | Providing wood work in frames of false ceiling,partitions etc. sawn andfixed in position withnecessary stainless steel screws . Kiln seasonedand chemically treated Hollock wood |
| 23 | Providing and fixing aluminium work for doors,windows, ventilators and partitions withextruded built up standard tubularsections/appropriate Z sections and othersections of approved makeconforming to IS: 733and IS: 1285, fixing with dash fastenersofrequired dia and size, including necessaryfilling up the gaps atjunctions, i.e. at top, bottomand sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shallbe smooth, rust free,straight, mitred and jointedmechanically wherever required including cleatangle, Aluminium snap beading for glazing /paneling, C.P.brass / stainless steel screws, all complete as perarchitectural drawings and the directions ofEngineer-in-charge. Powder coated Aluminiumthickness of powder coating is 50 micron |
| 24 | Making plinth protection 50MM thick cementconcrete 1:3:6 over 75MM thick bed brickballast well rammed and consolidated andgrouted with fine sand including necessaryexcavation, levelling, dressing and finishing thetop surface |
| 25 | Anodized aluminium sliding door bolt250MMx16MM |
| 26 | Anodized aluminium Tower bolt 150MMx10MMbarrel type |
| 27 | Construction of granular sub-base by providingclose graded Material conformung tospecifications, mixing in a mechanical mix plantat OMC carriage of mixed materials by tippers towork site, for all leads &lifts, spreading inuniform layers of specified thickness with motorgrader on prepared surface and compacted withvibratory power roller to achieve the desireddensity complete as per specification anddirection of Engineer-in-charge. |
| 28 | Providing, laying, spreading and compactinggraded stone aggregate (size range 53mm to.075 mm ) to wet specification |
| 29 | Providing corrugated G.S. sheet roofing includingvertical / curved surface fixed with polymercoated J or L hook, with bitumen and GI limpetwashers filled with white lead including a coat ofapproved steel primer and two coats ofapproved paint on overlapping of sheetscomplete excluding the cost of purlin, raftersand trusses and including cutting to size andshape wherever required. 0.63mm thick withZinc coating not less than 275gm/ sqm. |
| 30 | Providing and fixing G.I. chain link fabricfencing of required width in mesh size50x50 mm including strengthening with2mm dia wire or nuts, bolts and washers asrequired to complete as per the direction ofEngineer-in-Charge, made of GI wire 4 mmthick |
| 31 | Providing wood work in frames of doors,windows, clerestory windows and otherframes, wrought framed and fixed inposition with hold fast lugs or with dashfasteners of required dia |
| 32 | Providing and fixing ISI marked flush doorshutters conforming to IS :2202(Part-I)decorative type, core of block frame of 1stclass hard wood and well with verticalgrains or cross bands and face shutter.35mm thick including stainless steel butthinges with necessary screws |
| 33 | Providing and fixing ISI marked oxidisedM.S. sliding door bolts with nuts and screwsetc. complete. 250MM x 16MM |
| 34 | Providing and laying in position cementconcrete of specified grade excluding thecost of centering and shuttering. Proportion1:2:4 |
| 35 | Supply, installation, fixing, testing andcommissioning of 63A, 240V, DP MCCB, withbreaking capacity 25 KA, along with Enclosurefor the MCCB to be wallmounted. Conforms to IS/IEC 60947-2 and IEC60947-2, and wiring for power supply in bothincoming and outgoing with earthing. Make:L&T, Schneider, ABB, Havells, Legrand . Allmaterials are in the scope of the contactor |
| 36 | Supply and laying of following size Armoured Power PVC LT Aluminium conductor cable 1100V grade as per IS 7098 (Part 1) 1988 or as latest amendment. (Havells/ KEI/ RPG/ CCI/ Polycab/ Finolex make)2 Core x 6 sqmm |
| 37 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to 1S-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Make: Finolex /Havells/Polycab/RR Kabel /including surface wiring with Flat ISI Marked PVC Casing n Caping (Make: Berlia/ AKG / Precision/ Presto Plast/Polycab including earth continuity. All materials are under the scope of the cotractor |
| 38 | With 2 x 4 sq. mm. + earth continuity with [Mtr. 1x2.5 sq. mm. cable in Flat 32mm ISI Marked PVC \"Casing\" n \"Capping\" |
| 39 | Wiring for Indoor lighting/ wall mounted fan/ceiling fan with 3x1.5 sg mm P.V.C.insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS- 694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Make: Finolex\ /Havells/RR Kabel /Polycab) with flat 25 mm ISI marked casing \"n\" capping (Make: AKG / Precision/ Presto Plast/Polycab) in surface wiring system, including 6 Amp flush type switch/ bell push,(Make: Anchor/Kolor kany.Kom/ Havells/MK ) and PVC/Backelite Switch Board (Make: Presto Plast/Havells/Linx/Anchor/) as approved and directed by the Deptt.). All materials are under the scope of the contractor. |
| 40 | Medium point upto 6.00 metre length |
| 41 | Long point upto 10.00 metre length |
| 42 | Wiring for 5 pin 16 Amps plug point with 2x4 sq. Mm P.V.C. Insulated single core unsheathedindustrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed elctrolytic copper conductorfor voltage grade up to 1100 volts (Make : Finolex /Havells /RR Kabel /Polycab /Anchor) with flat 25 mm ISI marked cashing \"n\" capping (Make : AKG /Precision /Presto Plast /Polycab) in surface system, including 5 pin 16 Amps flush type plug socket and 16 Amps F/T switch (Make : Anchor penta /Gold medal /Kolor kany.com /Havells) and PVC/Backelite Switch Board (Make : Presto Plast /Havells /Linx /Anchor) including earth continuity with 2.5 sq. mm cable to third pin of the plug socket etc. as required complete, when placed elsewhere. All materials are under the scope of the contactor.Medium point up to 6.00 metre length |
| 43 | Wiring for 5 pin 5/6 Amps plug point with 2X4 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to 1S-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Make: Finolex /Havells/RR Kabel/Polycab / Anchor) with flat 25 mm ISI marked casing \"n\" capping (Make: AKG / Precision/ Presto Plast/Polycab/) in surface system, including 5 pin 16 Amps flush type plug socket and 16 Amps F/T switch (Make:Anchor penta /Gold medal /Kolor kany.Kom/Havells) and PVC/Backelite Switch Board (Make: Presto Plast/Havells/Linx/Anchor/) including earth continuity with 2.5 sq. mm. cable to third pin of the plug socket etc. as requiredcomplete, when placed elsewhere. Allmaterials are under the scope of thecontractor. Medium point upto 6.00 metre length |
| 44 | Supply, Installation, fixing, testing and Commissioning of 1X20 Watt, 6000K LED tube light with ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient ready to use pack as per the relevent iswith latest amendment, with allaccessories for lighting with necessary wiring, earthing, providing celling rose etc as required to be mounted in the wall and as directed by the department. Make: Havellsmake (Cat No. LHEXBLP7PN1W020) orequivalent make of Bajaj /Philips /Crompton Greaves . All materials is in the scope of the contactor |
| 45 | (Supplying including fitting of A.C. Ceiling fan No. of 1200mm sweep complete with all accessories like regulator, down rod, canopy etc. with making necessary wiring connection of cable, as approved by the Deptt as required complete and as directed by the Department. (ORIENT PSPO / Usha /CROMPTON / Havells/ Bajaj/ VGAURD/Luminous). All materials are in thescope of the contractor. |
| 46 | Supply, installation & fixing of 10Module, SPN,MCB DB, with single door made up of CRCA sheet steel powder coated enclosure, with all accessories for connections such as DIN Rail, Neutral Link, Earthing connection nob, glanding etc. Conforms to IS with latest amendment of make Legrand/L&T/Havells/Schneider/ABB/Siemens. All materials are in the scope of the contractor. |
| 47 | (Supply, fixing, testing and commissioning No.with necessary wiring for power supply inboth incomming and outgoing for 240 V,50Hz, SP, 32A MCB, breaking capacity notless than 10KA, C-curve type withnecessary wiring and earthing.Make:Legrand/L&T/Havells/ Schneider/ABB. All materials are in the scope of thecontractor. |
| 48 | Supplying with installation, testing and commissioning of 1.5 Ton Hi-- wall 5 STAR rating non ducted split type inverter air conditioner for the rooms of Advisor, APL and Project conference room with cordlessremote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.upto 5m between the room unit and out door unit as directed by the department. Make:LG(Model No:KS-Q12YNZA) or equivalentmake of Voltas/ Samsung / Bluestar/Godrej/ Carrier. The Air-conditioner should have a minimum 1 Year warranty on product and 5 Years on compressor. All materials are in the scope of the contactor. |
| 49 | Supply, installation, testing and commissioning of Earth Electrode with perforated 3 Mtr. Long, 50 Mtr. Dia, Gl Pipe as per IS: 3043 including all accessories like GI nut bolts, reducer, nipple , wiremessed funnel, Gl strip of 25mm X 3mm etc. and providing messonary with 2 ft under ground and 1 feet over ground enclosure with cover plate. All materials are in the scope of the contractor. |
| 50 | Supply, laying, clamping and fixing (1 coreX10 Sg. mm) armoured alluminiumconductor for connecting the earth electrode through (25mmX5mm) G.I. earth strip including connection, soldering etc. complete as per IS with latest amendment and as requird and directed by the department. All materials are in the scope of the contractor. |
