Public Health Engineering Department-PHED has published Tender For Construction Including Successful Testing And Commissioning Of 0.50 Lac Gallons Capacity Gsr, Sluice Chamber, Raw Water Sump/Pump House/ Intake Channel, Gang Hut, R/ Wall, B/ Wall, Anchor/ Saddle Blocks, Bath Room, Approach Road And Provid. Submission Date for this Tender is 15-05-2023. Anchors Tenders in Kupwara Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in:-All kinds of Soil |
2 | :-Ordinary Rock |
3 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed In all kinds of Soil |
4 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
5 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. in all kinds of Soil |
6 | Oridanary Rock |
7 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
8 | Oridanary Rock |
9 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :Addll 1 lift All kinds of Soil |
10 | Providing and laying dry stone soling hand packed tightly including Filling, Spreading, rammingcost of Stoneboulders and all leads and lifts complete. |
11 | Providing and laying in position cement concrete of specified grade including curing butxcluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 mix (1 Cement: 4 Course Sand : 8 graded crushed stone agg 40mm nominal size) |
12 | Providing and laying in position cement concrete of specified grade including curing butxcluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 mix (1 Cement: 3 Course Sand : 6 graded crushed stone agg 20mm nominal size) |
13 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 mix (1 Cement: 2 Course Sand : 4 graded crushed stone agg 20mm nominal size) |
14 | Providing and laying in position Reinforcedcement concrete of specified grade including curing butxcluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 mix (1 Cement: 2 Course Sand : 4 graded crushed stone agg 20mm nominal size) |
15 | Providing and laying in position Reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 mix (1 Cement: 3 Course Sand : 3 graded crushed stone agg 20mm nominal size) |
16 | Reinforced cement concrete work in walls (any thickness) including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1.5:3 mix. |
17 | Reinforced cement concrete work in Suspended floors,roofs having slope upto 15°, beams etc upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
18 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
19 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
20 | Extra for brick work with common burnt clay bricks /cement concrete bricks in superstructure above plinth level upto floor five level |
21 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
22 | Providing and incorporatoing P.G.I sheet strips during lying of concrete walls 0.80mm Thick |
23 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
24 | Providing and fixing of 200mm dia MS Flanged bend /tail pieces, specials etc of size 0.90 - 1.50mtr as per the direction of Er. Incg. Complete job |
25 | Dry random rubble masonry with hard stone in foundation and plinth:With bond stone. |
26 | Constructing vertical bunds with sloping faces, by boulder filling (dry, hand packed tightly); including cost of stones but excluding cost of wirecrates |
27 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
28 | Supply of 2nd class stones / Boulders excluding Carriages. |
29 | Supply of Wire Crates including all carriages by Mech. Transport and Head Load. |
30 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations |
31 | Walls |
32 | Beams |
33 | Suspended Floors |
34 | Columns |
35 | Domes exceeding 6 Mtr Span |
36 | Edges of slabs and breaks in floors upto 200mm thick. |
37 | Extra for Centering and shuttering in CircularFoundations |
38 | Walls |
39 | Beams (Ring Beam of SR) |
40 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
41 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete |
42 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate |
43 | 12 mm thick Cement plaster 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement |
44 | 12 mm thick Cement plaster 1 : 4 (1 cement : 4 coarse sand) |
45 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
46 | Fabricating, Providing and fixing MS Fittings viz Bends , Tees, etc of requireddegree and size to be fabricated from 6mm nominal size MS Plate including cost of welding. The work should be leak proof and includes to be painted with antoiccorrusive red oxide primerand all carriages upto site of work complete. |
47 | Providing and fixing 150mm dia Sluice Value with ISI Markwith Wheel type handle including cost of flanges, nuts, bolts, rubber insertion all carriages complete. |
48 | Providing and fixing 125mm dia Sluice Value with ISI Markwith Wheel type handle including cost of flanges, nuts, bolts, rubber insertion all carriages complete. |
49 | Providing and fixing 100mm dia Sluice Value withwith ISI Mar Wheel type handle including cost of flanges, nuts, bolts, rubber insertion all carriages complete. |
50 | Providing and fixing 80mm dia Sluice Value withwith ISI MarWheel type handle including cost of flanges, nuts, bolts, rubber insertion all carriages complete. |
51 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc, in layers no exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m |
52 | Providing and fixing PVC pipe bends 80mm dia for air vents. |
53 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
54 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.0mm thick glass panes |
55 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
56 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel as required in gratings, frames, guard bars, ladder, railings, brackets, gates and similar works. |
57 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes |
58 | Structural Steel Work in built up sections in trusses, and framed work, including cutting, hoisting, fixing in position and applying a priming coat coat of approved steel primer all complete. (Riveted and bolted) |
59 | Providing and fixing G.I. Chain Link fabric fencing of required width in mesh size 50 x 50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - In- Charge made of G.I. Wire of dia 4mm. |
60 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces |
61 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
62 | Providing fabricating and fixing sign boardon PGI Sheet with angle iron frame/ Legsincl.Painting /writing etc including fixing over enterencegates , cost of fixing at SR site/Filt Plantsite as per direction of Engineer in Charge complete job. |
63 | Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface. |
64 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
65 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shadeTwo or more coats on new work. |
66 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
67 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm |
68 | Providing and fixing almunium haging floor single rubber door stopper (Anodic coating not less than grade AC 10 as per IS 1868 |
69 | Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete : 200 x 10mm |
70 | 100 x 10mm |
71 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc. |
72 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125mm |
73 | 100mm |
74 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
75 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
76 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL-PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply,capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work-exposed on wall with clamps at 1.00 meter spacing 1620 (20mm OD) pipe |
77 | 2025 (25mm OD) pipe |
78 | Providing and fixing PPR Unions PPR Union 20mm |
79 | PPR Union 25mm |
80 | Providing and fixing water closet Squatting Pan (Indian Type WC Pan) with 100mm sand cast iron P or S Trap, 10 ltr capacity Low LevelWhite PVC Flushing Cistern including flush pipe of approved make with manually controlled device (Hnadle lever) confirming to IS: 7231 with all fittings and fixtures complete including cutting and making good the walls and floors whereever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
81 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510mm bowl depth 200mm |
82 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe32 mm dia |
83 | Providing and fixing 15 mm nominal bore C.P. brass bib cock ofapproved quality conforming to IS : 8931 |
84 | Providing and fixing 15mm nominal bore CPBrass close holeBasin Mixer of approved quality and make wheighing not less than 1.97 Kg |
85 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) ofstandard design and of approved make conforming to IS : 8931 |
86 | Providing and Fixing C.P. Brass long nose bibcock 15 mm nominal bore |
87 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
88 | Providing and fixing C.P. Brass extension nipple (size 15mm x 50mm) of approved make and quality as per direction of Engineer-incharge |
89 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
90 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm nominal bore. |
91 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
92 | Providing and fixing of GI pipes complete with GI fitting and clamps incl. cutting and making good the walls etc nominal bore 15mm |
93 | Providing and fixing G.I. pipes complete with G.I. fittings excludingtrenching and refilling etc. (external work) 15mm dia. nominal bore |
94 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand), with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5 |
95 | Providing and fixing C.I manhole Cover 0.45 x 0.45m size |
96 | Providing and fixing PVC Soil waste and vent pipe of reputed make incld earth eork and refilling. 100mm dia |
97 | 75mm dia |
98 | Providing and fixing PVC Door Fittings complete. |
99 | 100mm floor trap |
100 | 100mm door junction |
101 | 100mm Collar |
102 | 10mm Gasket |
103 | 100mm bends |
104 | 80mm Door Junction |
105 | 80mm floor trap |
106 | 80mm bend |
107 | 80mm Collar |
108 | Floor Grating |
109 | Providing Lightingpoints .Using wire of 1-5 sqmm, copper conductor, Multi stranded , 1100 volts, FR, for phase , neutral & earth of 1mm green colour for each point including PVC Condut pipe of reputed make including chasing of walls and making good the sameTesting / Commissioning for all points upto 6 Amp)including Switches, indicators, MCB"s and all connected items etc complete |
110 | Providing Heating Points: Upto 16 Amp using 4mm multistranded copper wire, 1100 volt FR to be laid for phase and neutral but 2.5 sqmm cable for earth in green colour to be connected for all the required points/ sources ncluding Switches, indicators MCB"s including PVC Condut pipe of reputed make including chasing of walls and making good the same and all connected items etc complete |
111 | P/Fitting / Commissioning of Main Switch board for accommodating the MCBs of sizes -HPL/ Standard / SSK make (18"x24") |
112 | Supply and fixing of LED Bulbs of Superior/ approved quality 12W (220-240V) with frequency 50 Hz . |
113 | Carriage of materials from source to road site of work by Mechanical Transport including loading unloading and stacking complete. |
114 | Cement and Steel20 Km"s |
115 | Sandavg lead to25 km"s |
116 | Crushed Aggregate 20mm nominal Size25 Kms |
117 | Crushed Aggregate 40mm nominal Size25 Kms |
118 | Stone upto 14 kms |
119 | Bricks from Bugam 130 kms |
120 | Surplus Earth upto safe dumping of site |
121 | Carriage of materials fromroad site upto actual site of work by manual means (Head Load)including loading unloading and stacking complete. |
122 | Cement50 M trs |
123 | Steelavg 50 Mtrs |
124 | Sand and 20mm Crushed agg avg 50 Mtrs |
125 | 40mm Crushed Aggregate 50 Mtrs |
126 | Bricks 50 Mtrs |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail