Public Works Department-PWD has published Tender For Repair Renovation To Minister House No. 9 A At Grant Lodge. Shimla-2 (Sh Painting. Polishing. Distempering. Renovation Of Kitchen, Toilets And Repair Of Flooring. Etc.).. Submission Date for this Tender is 18-05-2023. Building Repair Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishingcementconcretemanually/bymechanicalmeans including disposal of material within allleads as per direction of Engineer - in - charge.(i) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within allleads.(i) For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within alllead. |
| 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, all leads including all lifts involved. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement :3 coarse sand) : 6 graded stone aggregate 40 mm nominal size)including carriage of materials within all leads and lifts |
| 6 | Providing and fixing 19mm (Nineteen milimetre) thick commercial boardfor cup board etc., in Box, shelves with screws and fittings wherever required,(fittings to be paid separately). including carriage of materials within all leads and lifts |
| 7 | Providing and fixing 19mm (Nineteen milimetre) thick commercial board Shutters for cup board etc.,with screws and fittings wherever required,(fittings to be paid separately) including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. including carriage of materials within all leads and lifts |
| 8 | Providing and fixing Brass sliding door bolts (S.S. Or equivalent) (i) 250 X 16 mm size. including carriage of materials within all leads and lifts |
| 9 | Providing and fixingHettich Hinge cupboard (S.S. Or equivalent) (i) 150 X 10 mm size. including carriage of materials within all leads and lifts |
| 10 | Providing and fixingBrass handles anodized (i) 125 mm size including carriage of materials within all leads and lifts |
| 11 | Providing and fixingBrass handles anodized (i) 100 mm sizeincluding carriage of materials within all leads and lifts |
| 12 | Providing and fixingBrass tower bolts (Barrel type) (i) 150 mm size.including carriage of materials within all leads and lifts |
| 13 | Providing and fixing hydraulic single acting Door closerwith necessary screws etc. complete. 150 mmincluding carriage of materials within all leads and lifts |
| 14 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.including carriage of materials in all leads and lifts. |
| 15 | Providing and fixing 150mm (one hundred fifty milimetre) oxidized M.S. hooks and eyes.including carriage of materials within all leads and lifts |
| 16 | Providingand fixing PVCplain cover fillets beeding20 x 3mm section including mitring at junction with wooden screws and nails etc. including carriage of materials within all leads and lifts : |
| 17 | Providing and fixing high density fiberboard (HDF) in Flooring / wall lining Pre-laminated one side decorativeand other side plain,having density of 800-1000 kg/m³ with necessary fixing arrangement and screws etc. complete including carriage of materials within all leads and lifts (i) 8mm Thick |
| 18 | Providing and fixing 1 mm thick lamination sheet of approved shade and quality fixed with approved adhesive and nails complete including carriage of material within all leads and lifts. |
| 19 | Providing and fixing Door Silencer 3 " with screws etc. complete.inclusive for carriage of materials within all leads, lifts and other incidentals. |
| 20 | Providing and laying vitrified floor tiles in Size of Tile 600x600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeincluding carriage of materials within all leads and lifts |
| 21 | Providing and laying Vitrified tiles in Size of Tile 600x600 mm(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).including carriage of materials within all leads and lifts |
| 22 | Providing and laying matt finished vitrified tile of size 300x300 x 9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.including carriage of materials within all leads and lifts |
| 23 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels(i)Granitestoneincluding carriage of materials within all leads and lifts |
| 24 | Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as perdesign approved by Engineer-in-Charge:- Granite work. |
| 25 | Polishing with Malamine polish including carriage of materials within all leads and lifts.(i) Two or more coats on new works including a coat of wood filler |
| 26 | Providing and Fixing Modular kitchen , Drawer Made ofMS. Wire Grating complete in alll RespectIncluding Carriage of Material with in All leads and lifts.(i) Size of Drawer 600x450x250 mmincluding carriage of materials within all leads and lifts |
| 27 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work complete including carriage of materials within all leads and lifts. |
| 28 | Painting with synthetic enamel paint on previously painted wood or steel surface of approved brand and manufacture of required colour to give an even shade one or more coats on old work including carriage of materials in all leads and lifts. |
| 29 | French spirit polishing One or more coats on old work including carriage of materials within all leads and lifts as per direction of the Engineer-in-charge. |
| 30 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.including carriage of materials within all leads and lifts. |
| 31 | Providing and applying white cement based putty of average thickness 1.00mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads and lifts. |
| 32 | Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10sqm) including carriage of materials and as per the direction of the Engineer-in-Charge. |
| 33 | Providing scaffolding for all kind of works in multistorey buildings up to all height with Bamboo complete tied with rope on joints and pedistal of CGI Sheet etc. in all respect (Face area of scafolding up to top pedestal height shall be measured and paid for) including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge. |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge:- External work 15 mm nominal outer dia Pipes. |
| 35 | Providing and fixing on wall face unplasticised Rigid PVCpipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(a) 110 mm diameterincluding carriage of materials within all leads and lifts |
| 36 | Providing and fixing on wall face unplasticised Rigid PVCpipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameterincluding carriage of materials within all leads and lifts |
| 37 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVCpipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bends of required degree (any radius) :-Providing and fixing PVC (finolex) plain bend ISI marked including fixing with approved adhesive etc. complete.(i) 110 mmnominal size :- including carriage of materials within all leads and lifts |
| 38 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVCpipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bends of required degree (any radius) :-Providing and fixing PVC (finolex) plain bend ISI marked including fixing with approved adhesive etc. complete.(i) 75 mm nominal size :- including carriage of materials within all leads and lifts |
| 39 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete(i) 110 mmnominal size :- including carriage of materials within all leads and lifts |
| 40 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete(i)75 mm nominal size :- including carriage of materials within all leads and lifts |
| 41 | Providing and fixing PVCsingle equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.(i) 110 mmnominal size : including carriage of materials within all leads and lifts- |
| 42 | Providing and fixing PVCsingle equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.(i) 75 mmnominal size :- |
| 43 | Providing and fixing PVCcollars ISI marked including fixing with approved adhesive etc. complete.(i) 110 mmnominal size :- including carriage of materials within all leads and lifts |
| 44 | Providing and fixing PVCcollars ISI marked including fixing with approved adhesive etc. complete.(i) 75 mm nominal size :- including carriage of materials within all leads and lifts |
| 45 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.(i) 110 mm X 90 mm. including carriage of materials within all leads and lifts |
| 46 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.(i) 110 mm X 75 mm. including carriage of materials within all leads and lifts |
| 47 | Providing and fixing white vitreous china pedestal type water closet Hindwarwe/ equivalent(European type W.C. pan) including seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, including manually controlled device (handle lever), conforming to IS : 7231, including all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan including ISI marked white solid plastic seat and lid including carriage of materials within all leads and lifts |
| 48 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.Cat No.LYSWHT38851PI including carriage of materials within all leads and lifts |
| 49 | Providing and fixing wash basin approved Brand / Maket including C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm including a 15 mm CP Brass single hole basin mixer Cat No. LYSWHT38801 |
| 50 | Providing and fixing white vitreous china urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having waterinletfrombackside,includingDiversion plate 600x300 mm & fixingtowallwithsuitable brackets all as per manufacturers specification and direction of Engineer-in-charge. including carriage of materials within all leads and lifts |
| 51 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 including C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink including drain board 470x420x178 mm bowl depth 178 mmincluding carriage of materials within all leads and lifts |
| 52 | Providing and fixing C.P. brass Waste Coupling for wash basin and sink, of approved quality and colour Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gmsincluding carriage of materials within all leads and lifts |
| 53 | Providing and fixing P.V.C. waste pipe 32 mm dia for sink or wash basin including P.V.C. waste fittings complete. including carrage of material within all leads and lifts:- |
| 54 | Providing & fixing 100 mm dia, C.P. grating including carrage of material within all leads and lifts:- |
| 55 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 56 | Providing and fixing C.P. towel railcomplete with brackets fixed to woodencleatswithCPbrassscrewswithconcealedfittings arrangement of approved quality and colour.600 mm long C.P.towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Cat No. AQH7711including carriage of materials within all leads and lifts |
| 57 | Providing and fixing C.P. towel bracketcomplete with brackets fixed to woodencleatswithCPbrassscrewswithconcealedfittings arrangement of approved quality and colour.600 mm long C.P.towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Cat No.AKP35781PSincluding carriage of materials within all leads and lifts |
| 58 | Providing and fixing C.P. towelringtrapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Cat No.AKP35721Pincluding carriage of materials within all leads and lifts |
| 59 | Providing and fixing 600x120x5 mm glass shelfAC107with edges round off, supportedonanodisedaluminiumangleframewithC.P.brass bracketsHindwarwe/ equivalent and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials within all leads and lifts :- |
| 60 | Providing and fixing three in oneacrylic shelfwith edges round off, supportedonanodisedaluminiumangleframewithC.P.brass bracketsHindwarwe/ equivalent and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials within all leads and lifts :- |
| 61 | Providing and fixing toilet paper holderC.P. brass : including carriage of materials within all leads and lifts cat No.AKP35753PC |
| 62 | Providing and fixing CP Brassmixer for wash basin/sink of quality & make as approvedincluding carriage of materials within all leads and lifts :15 mm nominal dia Cat No ARI39309 |
| 63 | Providing and fixing CP Brass wall mixer of quality &makeas approvedincluding carriage of materials within all leads and lifts :15 mm nominal dia Cat No.KUP35117PM |
| 64 | Providing and fixing C.P. brass long nose bib cockof approved quality conforming to IS standards and weighing not less than 810 gms.including carriage of materials within all leads and lifts Cat No. 35037PM |
| 65 | Providing and fixing C.P. brass bib cock of approved quality , 202 conforming to IS standards and weighing not less than 810 gms.including carriage of materials within all leads and lifts Cat No.35038PM |
| 66 | Providing and fixing C.P. brass Pillar cock of standard design and of approved make conforming to IS:8931. including carriage of materials within all leads and lifts Cat No.35011BPM |
| 67 | Providing and fixing C.P. brass angle Cockfor basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts Cat No.KUP35053PM |
| 68 | Providing and fixing C.P.Health Faucetwith fittings complete.including carriage of materials within all leads and lifts Cat No.ALD573 |
| 69 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of materials within all leads and lifts |
| 70 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length, 15mm nominal boreincluding carriage of materials within all leads and lifts |
| 71 | Providing and fixing uplasticised PVC connection pipe with brass unions :60 cm length, 15mm nominal boreincluding carriage of materials within all leads and lifts |
| 72 | Providing and fixing C.P. soap Dish having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Cat NoAKP35731P including carriage of materials within all leads and lifts |
| 73 | Providing and fixing C.P. brass shower rose RF 206 with Shower 15 or 20 mm inlet :Cat No.HSH1665 including carriage of materials within all leads and lifts |
| 74 | Providing and fixing Tooth brush tumbler with necessary fitting complete including carriage of materials within all leads and lifts. |
| 75 | Providing and fixing Divertor with necessary fitting complete including carriage of materials within all leads and lifts. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
