|
| 1 | Dismantling existing damaged in Brick Wall including stocking carefully for reuse as directed by Department officers etc., complete |
| 2 | Earthwork Narrow excavation for foundation inordinary soil with initial lead and lift etc.,complete |
| 3 | Earthwork Narrow excavation for foundation inordinary soil with initial lead and lift etc.,complete (open Excavation) |
| 4 | Supplying and filling with M sand in layers of 15cm tk including watering and ramming to consolidation etc.,complete |
| 5 | Plain cement concrete 1:5:10 mix using 40mm ISS gauge HBBG metal for foundation and flooring including curing and all other labour charges etc., complete |
| 6 | Providing steel centering and shuttering with strutting arrangements for sides and soffits etc.,complete |
| 7 | without strutting |
| 8 | with strutting |
| 9 | Column |
| 10 | Supplying,cutting,bending & tying inposition of RTS grills for RCC works including cost of steel & binding wire etc.,complete. |
| 11 | Plain cement concrete 1:2:4 mix using 20mm ISS gauge HBBG metal excluding cost of centering but including cost of laying concrete,curing and finiising etc., complete |
| 12 | Reinforced cement concrete 1:2:4 mix using 20mm ISS gauge HBBG metal excluding cost of centering and steel but including cost of laying concrete,curing and finishing etc.,complete. |
| 13 | Foundation and basement |
| 14 | Ground floor |
| 15 | Brickwork in cement mortar 1:5(one cement and five sand) mix using country bricks of standard size 8¾”x4¼”x2¾”etc.,complete. |
| 16 | Foundation and basement |
| 17 | Ground floor |
| 18 | Special Ceiling Plastering with cement mortar 1:3mix,10mm tk etc., complete |
| 19 | Plastering with Cement Mortar 1:5mix,12mm thick etc.,complete |
| 20 | Supply and fixing inposition of cuddapah slab of 40mm tk with machine cut edge in all sides except bottom one lineetc., complete |
| 21 | Brickwork in cement mortar 1:5(one cement and five sand) mix using Fire bricks of standard size 8¾”x4¼”x2¾”etc.,complete. Super structure |
| 22 | Fabrication,supplying and fixing inposition of MS Grill with one coat of red oxide priming etc.,complete |
| 23 | Fabricating Supply and fixing and position of MS doors with double leave made out of 18 gauge M.S. sheet, outer frame 35x35x5mm angle, inner frame 25x25x5mm angle, cross stiffner with MS flat 25x5mm, altrop tower bolts 2 Nos. two handles and six holdfasts completed welded and rivetted and one coat of red oxide painting including cost of all materials and labourchargesetc., complete |
| 24 | Manufacturing,supplying & fixing inposition Steel windows glazed with openable shutter frame and shutter frame made out of steel section confirming to IS 7452/1990.The outer frames of windows made of Z section(F7D) of size 25x20x3mm confirming to IS 7452/1992 mullions are made of (F4B) of section size 46x25x3mm confirming to IS 7452/1990.The shutters are individual and each of them can be operated separately,Slash bar are made of \"T\" section(T2) of size 25x22x3m 2nos of sturdy hinges and 1no of handle cum slatch of special type are fixed for with openable shutter.Suitable opening is left for its any operation.1no of adjustable stay with locking bracket of sufficient length shall be provided for each shutter 4nos of 40x40x3mm angle hold fast 230mm length are welded to the outer frame at appropriate point MS square bars of 12mm size is welded to the inner face of the window at equal intervals not excluding 10cm spacings,3mm pin headed glass is used for glazing and the glass panes shall be fixed with good quality TW beeding size 15x15mm with screws for fixing.Grill members are painted with one coat of primer.Also rate is inclusive of cost of all materials,labour charges for fixing,one coat of primer,welding charges transportations to the work site,loading unloading and all other incidental charges etc.,complete. |
| 25 | Weathering course with concrete broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaterwith wooden beaters giving to required slope and thicknessetc., complete |
| 26 | Finishing the top with one course of pressed tiles of size 20x 20 x 2cm size laid in cm 1:3 mix mixed with water proofing compound as per Indian standard 2% by weight of cement used and pointed with the same mortar etc., complete |
| 27 | Supplying and fixing 110mm dia PVC rain water down fall pipe including cost of pipe, shoe, bond, brackets, teakwood plugs, etc., complete |
| 28 | Flooring with ceramic tiles of size 305x305x6mm of approved colour and quality in cement mortar 1:3mix and pointing with the same mortar and finish very neatly etc.complete. |
| 29 | Provision for Geological Investigation charges etc.,complete |
| 30 | Drilling of 6\" dia deep bore well in hand rock area with any required depth as directed by the departmental officers includinggrouting and inserting the casing pipe assembly drilled in hole and transportation charges from one place to another place etc.,complete |
| 31 | Supply of 200mm dia OD PVC casing pipe including transportation charges etc.,complete |
| 32 | Supply of Single phase submersible 1.00HP pumpset for borewell with ISI mark IS 8034(15lpmx100m) with Single phase panel board - DOL with two level guard and auto start etc.,complete |
| 33 | Supply of 3 core copper PVC insulated and sheathed flat type cable as per IS 694/1990 1.50sq.mm cable etc complete |
| 34 | Labour charges for the erection of 1.00HP submersible pumpset in bore well including fixing and jointing and submersible cable fixing of riser pipes to the required depth valves,erection clamps, pressure gauge upto the exterior wall of the pump room and erection of panel board consisting of TPICN switch starter,voltmeter,Ammeter three pilot(indicating) lamps,capacitor,single phase preventor,water level guard,laying and jointing the cable and twin earthing as per IE Rules etc., complete and testing the pumpset on trial run as directed by dept officers |
| 35 | Supply and fixing of following water supply materials at site with best quality etc.,complete |
| 36 | 32 mm dia UPVC pipe -SCH 80 borewell |
| 37 | 25 mm dia UPVC pipe -SCH 80 |
| 38 | 32 mm dia UPVC Coupling |
| 39 | 25 mm diaUPVC Coupling |
| 40 | 32 mm dia GM Gate valve |
| 41 | 25 mm dia GM Gate valve |
| 42 | 32 mm dia UPVC Union |
| 43 | 25 mm diaUPVC Union |
| 44 | 32 mm dia UPVC Tee |
| 45 | 25 mm dia UPVC tee |
| 46 | 32 mm dia UPVC Elbow |
| 47 | 25 mm dia UPVC Elbow |
| 48 | Solvent PasteUPVC |
| 49 | CPSDTap |
| 50 | pvc tank |
| 51 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for concealed PVC light/fan point (for elctronic regulator)SD-24. |
| 52 | Wiring with 2X1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point( SD-38) |
| 53 | Supply and run of 2 of 4Sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD-65. |
| 54 | Supply and run of 2 of 4Sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V in 20mm dia GI pipe with suitable bend on both endfor service connection mains SD-70. |
| 55 | Supply and fixing of 18 w 4 feetLED type tube light fitting with necessary arrangement etc complete |
| 56 | Supply and Fixing of 40W LED Street light of system made of pressure die cast aluminum housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of > 5000K , PF > 0.9. System efficacy >85. Operating voltage range of 120V to 270V with internal surge arrestor of Minimum 5.0KV. Driver current not than 700mA. THD < 10%. Lumens package not less 100 lm/W for LED Source. THD should be less than 10%.Test certificate from NABL(Nationalaccredited board for Testing & Calibration laboratory)for LM79 report. In house Testing facility to be available for the same, Lamp life not less than 50,000 Hoursetc; complete as per Standard Specification |
| 57 | White washing with two coats using best shell lime etc.,complete |
| 58 | Painting with two coats using ready mixed plastic emulsion paint of approved quality and colour over a priming coat including through scraping clean removal of dirt etc.,complete. |
| 59 | Painting with two coats using cement paint of approved quality and colour over a priming coat including curing and finishing etc.,complete. |
| 60 | Painting with two coats of best synthetic enamel paint of approved Colour and high quality with two coats to new iron work etc.complete. |
| 61 | Painting with two coats of best synthetic enamel paint of approved Colour and high quality with two coats to old iron work etc.complete. |
| 62 | Supply and fixing of vinyle name board with corporation embalom and lettering as Tiruchirappalli City Corporation, in Tamil as directed by the departmental officers including framed with 50x25mm country wood reepers outer finished with 1”x1” Aluminium beeding with all material and labour cost for fixing etc., complete |
| 63 | Reinforced cement concrete 1:2:4 mis using 20mm iss gauge HBBG metal for precast slab of the following thickness excluding cost of reinforced grlls in position but including moulding costing curing and fixing etc complete (75mm thick) |
