|
| 1 | Providing fitting fixing of 3 pole power contractor type ML (standard voltage 110,230,415, 50Hz) of L & T make. ML-4 Type ofCat.No.SS 90910 |
| 2 | ML-6 Type ofCat.No.SS 90921 |
| 3 | Providing fitting fixing of Spare ContactKit & Spare Coil for MLseries ofL &T make. ML-4 Spare Contact Kit of Cat No.SS95311 |
| 4 | ML-6 Spare Contact Kit of Cat. No.SS 95313 |
| 5 | ML-4 / ML-6 Spare Coil of Cat.SS 91258 |
| 6 | Providing FittingFixing of Bimetal over load relay type MN with single phasing protection of L & T makeMN-5 of Cat. No. SS9413700 K0 |
| 7 | Providing fittingfixing of thermal timer type GT-200 of Cat. No.SS91270 of L & T make (Operating Voltage 230/250 V, 360 V, 400/440 V,500 V, 50 Hz. For 5-18 secs Range). |
| 8 | Providing fittingfixing of Push button Pendants of 6A, 415 V, 50 Hz. Of Cat No. SS 90502 of L & T make.With 2 Push Buttons- |
| 9 | Providingfitting fixing of Connecting Busbar Link of Cat. ST41968OOOO of L&T make 4MPCB 55 MM WIDTH W/O ACC.- |
| 10 | Providing and fitting fixing of moving iron type range 0-100 A, 96 x 96 mm size AC Amps meter direct reading type(L & T/AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per direction of the E-in-charge. |
| 11 | Providing and fitting fixing of moving iron type range 0-500 V, 96 x 96 mm size AC Voltmeter (L & T/AE make)with selector switch as a electrical instrument of the pannel board as per specification anddirection of the E-in-charge. |
| 12 | Supplying and fixing of the following electrical accessories including necessary connection as required.36/40 Watt Fluorescent Tube light |
| 13 | 14/15 Watt Retrofit CFL Bulb |
| 14 | 36/40 Watt Electronic Ballast for FTL |
| 15 | Angle /Batten/ Pendent Holder |
| 16 | 25 Sq. mm Copper Terminal ends( Thimble) |
| 17 | 35 Sq. mm Copper Terminal ends( Thimble) |
| 18 | Supplying and fixing of outdoor LED luminaries complete with powder coated discast housing and heat resistant tempered glass/diffuser inlcuding necessary connection etc as required a. 30-36 Watt LED street light fixture (IP 65) |
| 19 | Supplying and fixing of GI pipe (medium gauge) bracket at suitable angle for fixing of outdoor light on wall/RCC base with necessary MS clamp nut, bolts etc as reqd 40 mm dia size. |
| 20 | Supplying of 1200 mm Sweep white colour AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod, canopies, shackles, three nos. blades( Without regulator) confirming to IS 374 (1979), BEE -5 Star |
| 21 | Supplying of 400 mm Sweep AC padestal fan with metal blade etc as required. |
| 22 | Wiring for Circuit/Sub-main wiring with the following sizes of PVC insulated Copper conductor cable(FR) in existingpvc casing capping/conduit in recess/surface in/c connection etc as reqd. 2X1.5 Sqmm |
| 23 | Providing and fitting fgixing of fully Automatic Star Delta type Motor Starter (3 ph. 50 Hz, 415V,) in steel sheet Enclosures with Contractors and Timer etc. complete suitable for submersible pump L & T BCH, ABB make as per specification and direction of the Engineer-in-charge50 HP/37 kw Relay range within 28-42 + 10% |
| 24 | 75 HP/55 kw Relay range within 45-75 + 10% |
| 25 | 100 HP/75 kw Relay range within 45-75 + 10% |
| 26 | 125 HP/90 kw Relay range within 45-75 + 10% |
| 27 | Providing and fiiting fixing with PVC insulated single core multistarnd Copper cable conforming to IS 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. i. 50 sqmm |
| 28 | ii. 70 sqmm |
| 29 | iii. 95 sqm |
| 30 | Providing and fitting fixing 3 phase indicating lamp fitted with panel board with three different colour lamps with batten holder complete as per specification anddirection of the Engineer-in-Charge. |
| 31 | Providing and fitting fixing Single phasing preventor +selectable under voltage +selectable Over voltage on delay 5sec & off delay 15sec phase asymmetry 10% L&T/BCH/Havells/Simens etc make compleate as per specification anddirection of the Engineer-in-Charge. |
