|
| 1 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc.complete as per direction of the Engineer- in-charge:- l In cement mortar. |
| 2 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position Local Teak Wood |
| 3 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessaryscrews excluding panelling and or glazing, which will be paid for separately but including the woodenbeading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.(i)Local Teak wood (1)35 mm thick shutters |
| 4 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion insidegrooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mmthick.(i)Local Teak Wood 16 mm thick |
| 5 | Providing and fixing flat pressed 3 layer particleboard medium density exterior grade (Grade I) orgraded wood particle board IS : 3087 marked toframe, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):12 mm thick |
| 6 | Dismantling old glass panes from wooden / steel structures including stacking of serviceable materials and disposal of rubbish and unserviceable materials to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. |
| 7 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming toIS: 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides withrequired EPDMrubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15).. |
| 8 | For shutters/ sliding shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately ):-Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15 |
| 9 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. of approved quality complete as per direction of Engineer-in-charge:-(a).Anodised aluminium of grade AC 15 ). |
| 10 | Providing and fixing glazing of approved quality in aluminium doors,windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge :(a)With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 11 | 12 mm cement plaster of mix(IV) Cement mortar 1:6 (1 cement : 6 fine sand) |
| 12 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 13 | Renewing glass panes, with putty and nails wherevernecessary including racking out the old putty:Float glass panes of thickness 4 mm |
| 14 | Providing and fixing aluminium sliding door bolts ISImarked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc.complete :300x16 mm |
| 15 | 250x16 mm |
| 16 | Prov iding and fixing aluminium tower bolts ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed torequired colour or shade with necessary screws etc.complete:a.300x10 mm |
| 17 | b.. 150x10 mm |
| 18 | Providing and fixing aluminium handles ISI markedanodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125mm |
| 19 | 150x10 mm |
| 20 | Distempering with oil bound washable distemper ofapproved brand and manufacture and of required shade on old work ( one or more coats ), to give aneven shade as required complete as per direction of theEngineer in charge. |
| 21 | Distempering with oil bound washable distemper ofapproved brand and manufacture and of required shade on old work ( one or more coats ), to give aneven shade as required complete as per direction of theEngineer in charge. |
| 22 | Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand andmanufacture on old work to give an even shadeincluding preparation of surface as required completeas per direction of the Engineer in charge. |