Tender For Construction Of Junior Engineer Quarter At Dak Bunglow Thanamandi Under Ard, rajouri-Jammu And Kashmir

Construction Of Junior Engineer Quarter At Dak Bunglow Thanamandi Under Ard , Earthwork In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc.(Not Exceeding 1.5M In Width) And For Shafts, Wells Cesspits And The Like Notexceeding 10 Sqm On Plan, Depth Upto 1.5 Mtrincluding Disposal Of Excavated Earth Upto 1 Mtr From Cutting Edge ,Disposed Earth Is To Be Leveled And Neatly Dressed In (All Kind Of Soil) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering- All Work Upto Plinth Level.1:5:10 (1 Cement: 5 Coarse Sand :10 Graded Stone Aggregate 40Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering –All Work Upto Plinth Level 1:3:6Using 20% Plumof Nallah Split Stone ( 1 Cement : 3 Coarse Sand : 6 Graded Crushed Stone Aggregate 20Mm Nominal Size ) Crushed , Brick Work With Common Burnt Clay (Non-Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In : Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand) , Extra For Brick Work With Common Burnt Clay Bricks/Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Five Level Including Curing But Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With.1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforcement For R.C.C. Work Including Straightening,Cutting, Bending, Placing In Position And Binding All Complete .Cold Twisted Bar , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length (Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately):Sal Wood , Centering And Shuttering Including Strutting, Propping Etc And Removal Of Form Work Formass Concrete , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platforms , Edges Of Slabs And Breaks In Floors And Walls.Above 20 Cm Wide , 15Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 6 ( 1 Cement : 6 Fine Sand) , 6 Mm Cement Plaster To Ceiling Of Mix 1 : 3 (1 Cement : 3 Fine Sand) , Providing & Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1 Cement:2 Coarse Sand: 4 Graded Stone Agg 12.5 Mm Nominal Size) And Curing Complete , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Chargesecond Class Deodar Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge First Class Deodar Wood , Providing And Fixing 12Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board (Conforming To Is: 12823 Grade-I Type-Ii) In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-Incharge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side. , Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge : Second Class Deodar Wood , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc Including Priming Coat With Approved Steel Primer All Complete. Fixed To Openings / Wooden Frames With Rawl Plugs Screws Etc. , Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete.2 Mm Thick , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade On New Work (Two Or More Coats) Over And Including Priming Coat With Water Thinnable Cement Primer , Finishing Walls With Water Proofing Cement Paint Of Required Shade On New Work (Two Or More Coats Applied @ 3.84 Kg/10Sqm) , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound) Content. With Ready Mixed Pink Or Grey Primer On Wood Work (Hard And Soft Wood) Having Voc Content Less Than 50 Grams/ Liter , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade On New Work (Two Or More Coats Applied @ 1.67 Litre/1 Osqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20Kg/1 Osqm) , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundation Etc. Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering Lead Upto 50M And Lift Upto 1.5M. , Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming Tois : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Partially Laid Surface / Recessed Medium Class Pvc Batten/Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Providing And Fixing Of Gyser Makes 151 50 Litres , Wiring Of Sobmain Wiring Alongwith Earth Wise With The Following Sizes Of Rris Pvc Insolated Copper Conductor , Supply And Fixing Suitable Size Gi Box With Modular Plates Cover In Front On Surface In Recess Including Providing And Fixiing 6 Pin / 5/6 Of Modular Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. , 5/6 Amps Switch , 3 Pin 5/6 Amp Socket Outlet , 6 Pin 15/16 Amp Socket Outlet , 15/16 Amp Switch , Supplying And Fixing Of Angle/Batten Holder(Metal Ring)Polycarbonate Including Making Complete Connections Along With 15Watt Led Bulbs Etc As Required. , Ceiling Fan 1200Mm Sweep ( 5 Star Rating Crompton Greaves) , Wiring For Circuit /Sobmain Wiring Earthwire With The Floowing Sizes 2X4sqmm 1X4sqmm Earth Wire , Providing And Fixing White Vitreous China Pedestal Type (European Type/Wash Down Type) Water Closet Pan. , Providing And Fixing Brass Bib Cock Of Approved Quality.15 Mm Nominal Bore , Providing And Fixing Brass Stop Cock Of Approved Quality. 15 Mm Nominal Bore , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete:Semi Rigid Pipe , Providing And Fixing 100 Mm Sand Cast Iron Grating For Gully Trap. , Providing And Fixing White Vitreous China Wash Basin Including Making All Onnections But Excluding The Cost Of Fittings. Flat Back Wash Basin Of Size 630X450 Mm. , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes Channels, Plates Etc. Including Welding ,Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete ,Including Fixing The Railing With Necessary Accessories And Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc. Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour: 600 Mm Long Towel Rail With Total Length Of 645 Mm, 78 Mm Wide And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms. , Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Providing Of Wooden Panelling 2(10+12) X10.00 = 440.00 Sft , Providing And Fixing Isi Marked Oxidized M.S. Handles Conforming To Is : 4992 With Necessary Screws Etc. Complete : , 125 Mm , 100 Mm , Providing And Fixing Isi Marked Oxidized M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete :250X16 Mm , Providing And Fixing Isi Marked Oxidized M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc Complete. 250X10 Mm , Carriage Of Material From Source To Site Of Work By Mechanical Transport Including Loading /Unloading And Stacking Complete. , Sand For An Average Distance Of 160 Kms By M.T , Stone Aggregate Below 40 Mm Nominal Size For Anaverage Distance 45Kms By M.T , Stone For An Average Distance Of 10 Km By M.T

INR 600 /-

INR 32420.0 /-

INR 16.21 Lakhs /-

Name of Work:Construction of Junior Engineer Quarter at Dak Bunglow Thanamandi

Sl. No.	Item Description
1	Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc.(Not exceeding 1.5m in width) and for shafts, wells cesspits and the like notexceeding 10 sqm on plan, depth upto 1.5 mtrincluding disposal of excavated earth upto 1 mtr from cutting edge ,disposed earth is to be leveled and neatly dressed in (All kind of soil)
2	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size)
3	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering –All work upto plinth level 1:3:6using 20% plumof nallah split stone ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size ) crushed
4	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
5	Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
6	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
7	Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete .Cold Twisted Bar
8	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood
9	Centering and Shuttering including strutting, propping etc and removal of form work formass concrete
10	Columns, pillars, piers, abutments, posts and struts
11	Suspended floors, roofs, landings, balconies and access platforms
12	Edges of slabs and breaks in floors and walls.Above 20 cm wide
13	15mm Cement plaster on the rough side of single or half brick wall of mix : 6 ( 1 cement : 6 fine sand)
14	6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
15	Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
16	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-chargeSecond class deodar wood
17	Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge First Class deodar wood
18	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
19	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood
20	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
21	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick
22	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
23	Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
24	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter
25	Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 Osqm over and including base Coat of water proofing cement paint applied @ 2.20kg/1 Osqm)
26	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
27	Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
28	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in partially laid surface / recessed medium class PVC batten/conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
29	Providing and fixing of Gyser makes 151 50 Litres
30	Wiring of sobmain wiring alongwith earth wise with the following sizes of RRIS PVC insolated copper conductor
31	Supply and fixing suitable size GI Box with modular plates cover in front on surface in recess including providing and fixiing 6 pin / 5/6 of modular socket outlet
32	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
33	5/6 amps switch
34	3 pin 5/6 amp socket outlet
35	6 pin 15/16 amp socket outlet
36	15/16 amp switch
37	Supplying and fixing of Angle/Batten Holder(Metal ring)polycarbonate including making complete connections along with 15watt LED Bulbs etc as required.
38	Ceiling fan 1200mm sweep ( 5 star Rating crompton greaves)
39	Wiring for circuit /sobmain wiring earthwire with the floowing sizes 2x4sqmm 1x4sqmm earth wire
40	Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
41	Providing and fixing brass bib cock of approved quality.15 mm nominal bore
42	Providing and fixing brass stop cock of approved quality. 15 mm nominal bore
43	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe
44	Providing and fixing 100 mm sand cast iron grating for gully trap.
45	Providing and fixing white vitreous china wash basin including making all onnections but excluding the cost of fittings. Flat back wash basin of size 630x450 mm.
46	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
47	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
48	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
49	Providing of wooden panelling 2(10+12) x10.00 = 440.00 Sft
50	Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :
51	125 mm
52	100 mm
53	Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm
54	Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 250x10 mm
55	Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
56	Sand for an average distance of 160 kms by M.T
57	Stone aggregate below 40 mm nominal size for anaverage distance 45kms by M.T
58	Stone for an average distance of 10 Km by M.T