|
| 1 | Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and othersections of approved make conforming to IS 733 and IS 1285 (ONe thousand two hundred eighty five) anodised transparent or dyed to required shade according to IS 1868. (One thousand eight hundred sixty eight) (Minimum anodic coating of grade AC 15(Fifteen ) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading forglazinge/ panelling C.P. brass/stainless steel screws. All completeas per architectural drawings and the directions of Engineer-In-Charge.For doors windows and ventilatiors and glazed partitions frames.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 2 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :P/F 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 3 | Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Plain Glass: 4mm thick. including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 4 | Providing and fixinganodized aluminiumhandles anodised transparent or died to required shade and colour with screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. 125mm. |
| 5 | Providing and fixing aluminium Towerbotls (barrel type) anodized transparent or dyed to required Shade & colour with screws etc. complete including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. 250x10mm. |
| 6 | Providing and fixinganodized aluminium sliding door bolts anodised transparent or died to required shade and colour with bolts,nuts and screws etc. complete including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.. (a)300 X16 mm( Three hundredfifty into Sixteen milimeter) |
| 7 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal ofunserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 8 | Brick work using common burnt clay building bricks in superstructure in Cement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.. |
| 9 | Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20mm nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm thick.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 10 | Providing and fixing vitrous china dual purposecloset suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 11 | Providing and fixing on wall face PVC (D-plast)rain water pipes including fiiing the joints with approved adhesive complete PVC 110mm ( one hundredten millimetre) dia including all leads lifts and carriage of materials and other incidential charges complete as per entire satisfaction of the Engineer-in-charge. |
| 12 | Providing and fixing G.I. Pipes complete with G.I. fitting sand clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia nominal bore including all leads lifts and carriage of materials and other incidential charges complete as per entire satisfaction of the Engineer-in-charge. |
| 13 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexibletube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 14 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore including all leads lifts and carriage of materials and other incidential charges complete as per entire satisfaction of the Engineer-in-charge. |
| 15 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. |
| 16 | Half brick masonry in 2nd class common brunt clay building bricks in Super strucutre in cement mortar 1:4 ( 1 cement : 4 sand) up to floor all level including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 600 x 600 mmincluding carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 18 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1Cement:6 Sand). including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 19 | 15mm cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto floor two level including arrises,internal roundedangles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. (iv) Cement Mortar 1:6 (1 cement:6 sand).including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 20 | Applying priming with cement primer coat on new concrete/Masonry/ asbestors cement/plastered surface and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with : Ready Mixed primer including carriage of materials with in all leads and other incidential complete as per entire satisfaction of the Engineer-in-Charge. |
| 21 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface completeincluding all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 22 | Finishing wall with weather proof exteriior grade emulsion of approved design (apexultima ) or its equarlied on undecorated wall surface (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dir, dust and other foreign matter etc including sand paper smooth complete |
| 23 | Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemperprimer of approved brand and manufacture after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. Upto Floor all level including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge. |
| 24 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. |
| 25 | Providing mild steel/Tor steel reinforcement for R.C.C.work including bending, binding and placing in position complete upto floor two level : Tor Steelincluding all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. |
| 26 | Centring, shuutering, strutting and propping etc. and removal of form for:suspended floors, roofs, landings, balconies and access platform including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. |
| 27 | Marbale stone flooring with 18 mm thick marble stone as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. |
| 28 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resistingcement as per IS : 4457,complete as per the direction of Engineer-in- ChargeIn dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile. |
| 29 | providing and fixing 1st quality ceramic glazed floor tilesconforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 30 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 31 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 32 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 33 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal boreincluding carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 36 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931(15mm nominal bore) including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 37 | Providing and fixingbrass float valve including all leads,lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. 15mm ( fifteen milimetre) nominal size including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 38 | Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 39 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mmincluding carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 40 | Providing and fixing 100 mm sand cast Iron grating for gully trap. including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge. |
| 41 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous Chinawash basin of size 630x450 mm with pair of15 mm C.P. brass pillar taps with elbow operated levers ISI Markedincluding carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge. |
| 42 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of materials with in all leads,lifts and other incidentals complete as per entiren satisfaction of the Engineer-in-charge. |
| 43 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C.automatic flushing cistern including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 44 | Providing and fixing Vitreous China Division plate (Hindware or equivalent make)for Urinals 600x300mm (Six hundred into Three hundred millimetres)size ISI markedcomplete in all respect as per HP.PWD specification,including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 45 | Providing and fixing Chromium Plated brass soap dish C.P. brass brackets fixed to wooden cleats with C.P. brass screwsincluding all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
