Chennai Port Trust-CPT has published Tender For Improvement Works To The Cisf Morchas At Unit Quarter Guard,Cisf Sentry Booth At New Gate Near Cisf Barracks,Cisf Sentry Post Near Ins Adyar Corner And 10 Th Gate Cisf Sentry Place Located In Ee ( C) Southern Division Area. Submission Date for this Tender is 09-05-2023. Building Work Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling and removing the existing damaged PVC security bunk(CISF) at new gate near CISF B coy building and handing over the RSD store/departmental store as directed at site. including removing and stacking the PCC slab/ lean mix concrete in bottom of the bunk or required size for constructing New CISF security bunk with out damaging the near by structure including all labour, tools, equipments, transporting fuel, etc., complete. |
| 2 | Earth work excavation in ordinary soil, sand, clay mixed with coal, iron ore, roots, boulder, debris, rubbish etc.upto 1.50m height , as existing at site of work for all works including dressing of sides, ramming of bottom and depositing the excavated earth within a lead of 50 m for disposal dewatering if any shoring, shuttering including all labour, tools, equipments etc., complete |
| 3 | Dismantling and removing the existing damaged AC sheet/Galvalume sheet roof from CISF security Morcha/ bunk with outdamaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard / disposing the material if not in usable condition within a lead of 2km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 4 | Dismantling and removing the existing damaged aluminium windowsincluding frame with shutters area less than 3Sq.m without damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 2km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 5 | Cutting and removing the existing damaged/Rusted MS angle/MS sheet/MS tubes/Channels/Square rod, etc., from the CISF Security Morchas in Quarter guard office and security bunk at 10th gate wherever required and providing, fabricatingand fixingsuitable newangles/channels/tubes/flates, Sheets, etc., including welding the joints, grinding,etc.,to match the existing frameall as directed at site of workand providing suitable grip bolts in the flooring for shed at 10th gate by welding andapplying one coat of red oxide primer including all materials, labour, tools, transport, equipments, fuel , etc., completeNOTE: 1. The payment is based on the weight of theNew MS angles/flats/sheets/sq.bars, etc as fabricated 2. The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary weighment charges will be borne by the contractor. |
| 6 | Providingand fixing Galvalume sheet powder coated colour corrugated roofing sheets(0.47mm) thick in morchas and CISF security bunk shed and fixing in position with necessary screws to the existing box channel/ L angle including joining the sheets to the required lap lengthwherever required without damaging the nearby structures all as specified andas directed at site, includingall labour,tools, equipments, materials, etc., complete. Note: Payment will be made only the actual area of sheet provided. |
| 7 | Providing and fixing Galvalume powder coated colour ridge sheet 0.47mm thick adjustable Ridges to suit the Galvalume roofing sheets as available in the Market and fixing in position with necessary screws to existing "C" channel/L angle/Galvalume roofing sheet including joining the ridges to the required lap length wherever required without damaging the nearby structures all as specified andas directed at site , includingall labour,tools, equipments, transport, materials, etc., complete. Note: Payment will be made only the actual area of ridge provided. |
| 8 | Providing and laying plain cement concrete of mix 1:4:8 (1cement :4 M sand: 8 stone aggregate (hard granite) graded aggregate of 40mm nominal size) in volumetric proportionfor levelling courseincluding shuttering, mixing, transporting, placing, consolidation by ramming, curing etc., all as directed at site of work Including all labour, materials, tools, equipments, etc., complete. |
| 9 | Providing and laying plain cement concrete of mix 1:2:4 (1cement :2 M sand: 4 stone aggregate (hard granite) graded aggregate of 40mm nominal size) in volumetric proportionfor base courseincluding shuttering, mixing, transporting, placing, consolidation by ramming, curing etc., and as directed at site of work Including all labour, materials, tools, equipments, etc., complete. |
| 10 | Providing Brick Work using bricks of class designation 50in CM1 : 5 ( 1 cement : 5 M. sand ) for CISF security bunk at new gate near CISF B coy building and wherever required, all as per details andall as directed at site including curing, labour, materials , tools, equipment, etc. complete. |
| 11 | Providing Brick Work using bricks of class designation 50in CM1 : 5 ( 1 cement : M. sand ) forPillastersin CISF security bunk at new gate near CISF B coy building and wherever required, all as perdetails andall as directed at site including curing, labour, materials , tools, equipment, etc. complete. |
| 12 | Providing Half Brick Work using bricks of class designation 50in CM1 : 4 ( 1 cement : 4 M.sand ) forsecurity bunk at new gate near CISF B coy building and wherever required, all as per detailsand all as directed at site including curing, labour, materials, tools, equipment, etc. complete. |
| 13 | Preparing the surfaces of wall and plastering in cement mortar 1:5 (1cement : 5 clean M sand) 12 mm thick to the required finish curing etc., all as directed at site of work including alllabour, materials, tools, equipments, scaffolding, etc., complete. |
| 14 | Preparing the surfaces of flooring and plastering in cement mortar 1:3 (1cement : 3 clean M sand) 20 mm thick to the required finish curing etc., all as directed at site of work including alllabour, materials, tools, equipments, scaffolding, etc., complete. |
| 15 | Preparing theinternal surfaces of walls, and applying two coats of plastic emulsion paint over a coat of primer in security bunk for new walls (Asian/Dulux or equivalent) of approved brand all as directed at site of work including all labour, scaffolding, materials, tools, equipments, tackles, brushes, etc. complete. |
| 16 | Preparing theexternal surfaces of wall, and applying Twocoats of Acurilic copolymer emulsion paint from Asian/Dulux paint or equivalent) of approved brand and colour over a coat of primer all as directed at site of work including all labour, scaffolding, materials, tools, equipments, tackles, brushes, etc. complete. |
| 17 | Preparing the surfaces of Steel members and painting with two coats of synthetic enamel paint (Asian or other equivalent approved brands) of approved quality to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. NOTE: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 18 | Supplying fabricating and fixing colour anodized aluminium main frames for windows with extruded built up standard sections of approved make INDAL/JINDAL or equivalent make according to IS 1868 (minimum anodized coating of Grade AC10) including supplying and fixing necessary accessories like anodized Aluminium snap on beading (clips), cleats angle fully threaded 75mm longmetal screws, wooden plugs ,etc., including drilling holes in the masonry / concrete etc., wherever required, all as directed including all labour, tools materials, equipments scaffolding, transport, fuel, etc., complete. Note: Aluminium sections shall be smooth, rust-free, straight, mitered and jointed mechanically wherever required. |
| 19 | Supplying fabricating and fixing colour anodized aluminium shutter frames for windows with extruded built up standard sections to match the existing Aluminium window main frames of approved make INDAL/JINDAL or equivalent make according to IS 1868 (minimum anodized coating of Grade AC10) including supplying and fixing necessary accessories like anodized Aluminium cleats angle fully threaded 75mm longmetal screws, handles, locking and sliding arrangements, PVC wheels, etc., all as directed at site of work including all labour, tools materials, equipments scaffolding, transport, fuel, etc., complete.Note: Aluminium sections shall be smooth, rust-free, straight, mitered and jointed mechanically wherever required. |
| 20 | Supplying and fixing in position 5mm thick Plain glass(Saint Gobain or Modiguard) for windows and louvered ventilators with all accessories like anodized aluminium snap on, beading, rubber beading, country wood beadings, etc., all as per relevant specification and as directed at site of work including all labour, materials, tools, scaffolding, equipments, etc., complete. NOTE: 1. The actual area of glass used alone will be measured for payment purpose. 2. The rate shall include the cost of rubber beading, country wood beading etc., |
| 21 | Providing and fixing good quality 30mm thick or nearest size single leaf factory made PVC rigid foam panelled door shutters single panelled (Manufactured by M/s Rajshree or Qute or equivalent) of approved section to suit the existing dooropenings and as directed at sitewith main frame, shutter frame and panels made out of extruded 5mm thick rigid PVC foam sheet mitered at corners and fixing the door main frame on the masonry wall surfaces with 100mm long screws, with PVC fasteners all as per manufacturer"s specification and as directed at site, including all materials, labour, scaffolding, transport, fuel, tools, equipments, etc., complete NOTE: 1.The door shall be manufactured to suit the size of the existing opening available at site. 2. Supplying and fixing necessary fixtures like butt hinges, tower bolts, etc., will be paid under relevant items of this schedule. |
| 22 | Providing and fixing Anodizied aluminiumfittings to the dooretc with necessary screws including all materials, labour, tools, equipments etc., complete. a)Butt hinges - 100mm long |
| 23 | Tower bolt - 150mm long |
| 24 | D type Handle,100 long |
| 25 | Aldrop - 250mm long |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
