Salem City Municipal Corporation has published Tender For Construction Of Integrated Welfare Hospital At Ammapet Ward Office In Division No 40, Zone Iii, Salem Corporation.. Submission Date for this Tender is 09-05-2023. Building Work Tenders in salem Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work excavation for foundation in hard stiff clay, stiff black cotton, hard red earth, shabs murams and ordinary gravel and hard dravel including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift |
2 | Collection,supply and filling ofsand from approved quarry to work site and stocking to the Departmental gauge for premeasurement as directed by the Departmental Engineer, to required depth not more than 15cm depth including cost andConveyance ofsand to site and all labour charges for filling etc., Complete complying with Standard Specification |
3 | Plain cement concrete 1:4:8 mix (One cement four m-sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing,laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
4 | Supplying and errecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing M.S Sheets of size90cm x 60cm and B.G 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over (silver oak joists) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete Complying with Standard Specification |
5 | a). Centering for Column & Sunshade |
6 | b). Centering for Plain surface |
7 | Supply and fabrication and placing in position of TMT steel rods to required size and length as directed by the departmental officers including cost of binding wire, cutting, bending and tying with proper position etc., including cost and conveyance of all materials to site and all labour chargesetc., complete Complying with Standard Specification |
8 | Reinforced cement concrete 1:1½:3 mix (One cement one and half m-sand three aggregate) using 20mm ISS gauge HBBG metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labourcharges etc., complete as per standard specification |
9 | a). Foundation Basement |
10 | b). First Floor |
11 | Brick Work in Cement Mortar 1:5 Mix (one cement, five m-sand) using new best II Class Bricks of size ( 9” x 4 3/8” x 23/4“) from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications |
12 | a). Foundation Basement |
13 | b). First Floor |
14 | Collection,supply and filling ofWell gravel from approved quarry to work site and stocking to the Departmental gauge for premeasurement as directed by the Departmental Engineer, to required depth not more than 15cm depth including cost andConveyance ofgravel to site and all labour charges for filling etc., Complete complying with Standard Specification |
15 | Special Ceiling Plastering for RCC slabs and beams with cement mortar 1:3 mix 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications |
16 | Plastering with cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications |
17 | Weathering course over roof slab using 20 mm size brick jelly mixed with pure slacked lime no sand to be used the proportion being 32:121/2 including cost and convenience of all materials to working site, well beating with wooden beaters giving necessary slope and thickness including finishing neatly etc. |
18 | Finishing the weathering course with one course of machine pressed, pressed tiles of size 20 cm X 20 cm X 2 cm in cement mortar 1:3 (One cement – three sand) mixed with crude oil 10 % by the weight and pointed with same oil mixed mortar including cost and conveyance etc. |
19 | Supplying and fixing MS grill to doors windows and ventilators etc. using 20mm x 6mm as directed by the departmental officers inclusive of cost of MS grill and labour charges including one coat of red oxide and fixing in position etc. complete |
20 | Manufacturing,supplying & fixing in position Supplying and fabrication and fixing in position of anodised natural colour matt finsh sliding window in two track in all floors with following sizes. All the three shutters with sliding arrangements, the bottom section should have Gutter arrangements, so as to drain the water entering and made with extruded aliminium section for outer frames as shown below with necessary accessories such rubber such rubber beading. Aluminium clips, rubber beading, handle and fixing 4mm thick clear sheet glass including all required for fabrication etc, complete. Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with powder drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers. The Al.Surfaces is to be anidised with matt finish under electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns. |
21 | Louvered Ventilator Supplying and fixing in position of Aluminium anodised colour matt finish Louvered Ventilator. The outer frame will be 62 x 38 x 2mm @ 1.17 Kg/m and louvers with moving arrangements will be made with Alu. channel of size 60 x 30 x 4mm @ 1.27 Kg/m with necessary glass pans for louvers 4mm thick Al. clips, including all materials, labour & electrical consumption charges required for fabrication if necessary chipping dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc complete. The Al.Surfaces is to be anodised with matt finish under electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns. (All materials should be got approved by the Executive Engineer before fixing in position) |
22 | Stainless Steel Salem Stainless Steel Door Frame Box Section using stainless steel plate of 1.6mm thick of 100mm x 60mm with a rebateof 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc. |
23 | Supplying and fixing door shutters for Medium Density Fiber Board of exterior grade 35mm thick, single leaf conforming to IS:12406/1989 with 35x12mm T.W.Lipping on all edges with necessary adhessives and CP screws complying with standard specifications. The rate is inclusive of three coats of best quality varnish but excluding cost of furniture fittings. such as 300mm tower bolt 2Nos, 200mm towerbolt 1No. 300mm Aldrop 1No. Alu handle ornamental type 2Nos, and 1No. Door Stopper etc, complete. |
24 | Flooring with Vetrified flooring tiles of size 600 x 600 x 8mm of approved colour and quality of required size laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortar complete and finish very neatly etc complete |
25 | Flooring with ceramic tiles of approved Colour and quality of size 305mm x 305mm x 6mm laid first quality design of all colours in cement mortar 1:3 mix, 20mm thick and pointing with the same mortar etc., completely and finish very neatly |
26 | Flooring with Eurocon grip tiles of size 30 x 30 x 1cm of approved colour and quality (Endura industrial tiles) in cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly |
27 | Dadooing walls with Ceramic tiles of size 20cm x 20cm x 6mm first quality design tiles of all colours laid in cement mortar 1:2 mix, 10mm thick and pointing with white cement using 0.40 kg/1m2 including finishing the joint and pointing flush with tile surface etc., complete |
28 | Supply and fixing in position of European water closet with "S" (or) "P" trap of approved color and quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with standard specification including supply and fixing in position of 10litre capacity glazed porcelain low level flushing tank on wall including 2 Nos of 15mm & brass nipple, 15mm dia PVC brass connection, 15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection etc., complete |
29 | Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete1:4:8 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers. (the WC should got approved by the Exe. Engineer before use on works) |
30 | Supplying and fixing in position best quality approved make colour glazed earthen ware wash hand basin size 550mm x 400mm with a pair of cast iron brackets including cost of15mm F brasschromium plated pillartap, 32mm F C.P. waste, 32mm F PVCwastepipe with rubber plugs and chain, 15mm FG.M. Wheel valve 15mm F brass nipple, 15mm F Nylon connectionsetc. Including fixing the wash hand basin in the wall in position with a pair of C.I. Brackets with teak wood plugs and screws |
31 | Supply and laying of granite slabs super fine polished with machune cut edges of sizes 4" x 2" and above 18 to 20mm thick including cost of granite slab, laying charges and full round nosing etc., complete. |
32 | Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required |
33 | Painting two coats with best synthetic enamel paint of approved Colour for new iron works the rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification(paint should be got approved by the Departmental Engineer befor use on work. |
34 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathedCu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD-23) |
35 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x for open PVC plug point.inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for PVC Plug Point (SD-36) |
36 | Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. (SD-39) |
37 | Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make] (SD-140) |
38 | Supply and fixing of single box type 4" 18W Crystal Glass LED Tube Light Fitting(Havells / Equivalent) complete with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. |
39 | Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1meter down rod on the existing clamp. (SD-107) |
40 | Supply and Fixing of WT Bulk Head Fitting with guard (Philips / Bajaj / K. Lite) Suitable for 11W CFL Lamp with CFL (SD-83) |
41 | Supply and fixing of 1000 W automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire, but without plumping work(SD-103) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail