Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-05-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-05-2023 |
| 2 | 27-04-2023 | Corrugendum No 2 | Other | 08-05-2023 |
| 3 | 25-04-2023 | Corrugendum No 1 | Other | 08-05-2023 |
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" PART - I (B&R PORTION) :- Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Demolition of brick work or stone / boulder / PCC block masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed. |
| 4 | Dimolition of wall and ceiling boards (fibre pulp / wooden / insulation etc) or insulation boards / slabs / blankets of any thickness including cover fillets complete all as specified and as directed. |
| 5 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in modular bricks in cement mortar 1:6 complete all as specified and as directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and as directed. |
| 7 | M &L for 25 mm thick PCC(1:2:4 )type B-0 mix using 12.5 mm graded stone aggregate as in floor finishes and finished even and smooth complete all as specified and as directed. |
| 8 | M & Lfor 15 mm thick screed bed or bedding layer of cement mortar 1 : 6 for laying of floor tiles etc complete all as specified and as directed. |
| 9 | M & L for rendering10 mm thickin CM 1 : 4 for laying of skirting / dado etc complete all as specified and as directed. |
| 10 | M&Lfor Vitrified light shade coloured Ceramic tiles double charged 10 mm thick (Square / rectangular) polished area of each tileexceeding 0.36 sqm and not exc 0.42 Sqm asin floors etcset and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and as directed. |
| 11 | M&L for non skid colour ceramic tiles of 7 to 8 mm thick (square / rectangular) area pf each the exceeding0.11 sqm but not exceeding0.18 sqm of approved 1st qualityin floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match colour of tiles complete all as specified and as directed. |
| 12 | M & L for GlazedCeramic tiles coloured, of size350 mm x 250 mm X 7 mm / 450 mm X 350 mm X 7mm thick approved 1st quality asinvertical surfaces such as skirting / dados and risers to steps etc, set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles complete all as specified and as directed. |
| 13 | M&L for kota stone slab flooring 20 - 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed. |
| 14 | M&L for Preparation of old surfaces andapplication of silicon sealent to create tough, water tight,mildew resistent seal to window system with appropriate tool ie utility knife,caulking gun and tooling device complete all as specified and as directed. |
| 15 | M&L 50 mm thick sand filling under floors etccomplete all as specified and as directed. |
| 16 | M&L for Machine pressed precast conctete interlocking paver blockswith grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and as directed. |
| 17 | M&L for reinforced cement concrete 1:2:4 type B-1 mix (using 20 mm graded stone aggregate) as in slabs supported on walls complete all as specified and as directed |
| 18 | M&L for form work to soffits of suspendedslabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 19 | M&L for form work to sides of slabs complete all as specified and as directed. |
| 20 | S&F Mild steel TMT bars10 mm diaand over., cut to length, bent to shape required including crancking, benddingwith mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 21 | S&F Mild steel TMT bars6 mm to 8 mm dia, cut to length, bent to shape requiredincl crencking benddingwith mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 22 | Dismantling of stone slabs of any description or thickness in floors and approns etc, laid ,bedded and pointed in any mortarcomplete all as specified and as directed. |
| 23 | M & L for 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) or on brick work laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing and cutting oval shape complete all as specified and as directed. |
| 24 | M & L for 20 mm thick Granite (of any type ) tiles machine cut,fixing in skirting dado or risers,jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishingcomplete all as specified and as directed. |
| 25 | Rounding to edge of stone slab one edge, such on in stop, and other similar situationcomplete all as specified and as directed. |
| 26 | Taking down chowkats or frames not exc. 1.5 Sq mtr each with shutters without taking off shutters from the frames complete all as specified and as directed. |
| 27 | Description all as per Ser Item No 26 above but exc 1.5 Sqm and not exc 4 sqm each complete all as specified and as directed. |
| 28 | Taking down shutters exc 1.0 Sqm and not exc 2 sqm each complete all as specified and as directed. |
| 29 | Taking down Shutters exc 1 sq. m and not exc 2 sq. m each and refixing in the same opening after carrying out easing and repair works complete all as specified and as directed. |
| 30 | S&F Factory made UPVC fully sound proof windows / doors including frames/choukats, shutters, powder coatedwith Vacume sealed 19 mm thick DGU (Double Glazed Unit) glass sliding in three tracks,02 shutters made up double glazing glass01 shutter with steel wire mesh of aperture not exceeding 1.40 mm sliding shutter with all fittings and fixtures andlocking arrangements including spacer,drying agent and sealents complete all as specified and as specified. |
| 31 | S&F Toughened glass door (frame less) with 12 mm thick toughened glass,swing type with 25 mm x 450 mm H type handle both side with soft door closer system with all fittings which are necessary for installation complete all as specified and as directed. |
| 32 | S&F Door closer hydraulically regulated,designation No 3 aluminium extruded section complete all as specified and as directed |
| 33 | Supply and fix 40 mm thick flush shutters,solid core construction typeand both faces covered with decorative veneer wirh lipping / frame to match complete all as specified and as directed |
| 34 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 35 | Supply and fix 100 mm sizemedium weight cold rolled mild steel butt hinges complete all as specified and as directed. |
| 36 | Supply and fix 200 mm size Alluminium,anodised barrel tower boltsof extruted section and fixed complete all as specified and as directed. |
| 37 | Supply and fix 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed. |
| 38 | Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed. |
| 39 | Supply and fix mild steel helical door spring rat tail rod model including roller plate complete300 mm long complete all as specified and as directed. |
| 40 | S&F 140 mm longfloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floors complete all as specified and as directed. |
| 41 | M&L for Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows,ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285 fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions,i.e. at top,bottom and sides with required EPDM rubber/neoprene gasket etc.Alunimium sections shall be smooth,rust free,straight,mitred and jointed mechanically whereever required including cleat angle,Aluminium snap beading for glazing/paneling,CP brass / stainless steel screws complete all as specified and as directed. |
| 42 | M&L for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 43 | S&F Anodised aluminium frame for doors / window / ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed. |
| 44 | Supply and fixing aluminium anodized ventilator shutters, louvered type without sash bars, aluminium sections of size 40 mm x 20 mmx 1.5 mm fixed in aluminium anodized frame of section size 63.5 mm x 38.18 mm x 2.0 mm including necessary jointing cleats, galzing clips, aluminium anodized snap beading, screws, aluminium beading rubber neoprene packing, aluminium anodized fitting & fixtures, complete all as specified and as directed. |
| 45 | S&F Anodised aluminium grill (Deco grill) of any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified and as directed. |
| 46 | Supply and fix solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed. |
| 47 | S&F Factory made PVC moulded door shutter with particle board core,28 to 30mm thick(stIles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam colour PVC sheet on back face supplying and fixing in frame at site complete all as specified and as directed. |
| 48 | S&F 5.5 mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified and as directed. |
| 49 | S & F12 mm thick prelaminated particle board,interior grade,prelaminated both sides with decorative choice laminations fixed with any sections complete all as specified and as directed. |
| 50 | Supply and fixed in repairs vitreous china ware wash hand basin 550 mmx 400 mm size flat back or angle including new bracket and making good all connections complete all as specified and as directed. |
| 51 | S&F in repairs Vitreous china urinal,half stall type white size 380 mm x 400 mm x 590 mmincluding spreader complete all as specified and as directed. |
| 52 | S&F in repairs Vitreous china urinal partition white of size 310 mm x 700 mm and fixed complete all as specified and as directed. |
| 53 | S&F in repairs 32 mm dia PVC waste pipe for sinks or wash basines etc complete all as specified and as directed. |
| 54 | Supply and fixed in repairs32 mm dia bore waste fittings brass chromium plated fixed to wash hand basins / urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and as directed. |
| 55 | S&Frepairs 15 mm dia Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferruleand fixed complete all as specified and as directed. |
| 56 | S&F in repair 15 mm bore pillar cocks fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred \"HOT or COLD\" with long screwed sunk and fly nuts complete all as specified and as directed. |
| 57 | S&F in repairs 15 mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and as directed. |
| 58 | Supply and fixed in repairs 15 mm bore LDPE pipe 450 mm long withbrass nuts and washers on both ends complete all as specified and as directed. |
| 59 | Supply and fixed inrepairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, and fixed to wall withchromium plated screws studsetc complete all as specified and as directed. |
| 60 | Supply and fixed in repair vitreous china wash down water closet pan (Pedestal type),Indo- western white includingremoving the existing onecomplete and making good all connectionscomplete all as specified and as directed. |
| 61 | S&F in repairs white / black plastic seat coversolid confirming to ISI mark any type complete all as specified and as directed. |
| 62 | S&F inrepairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32 mm dia PVC flush pipe including taking down unserviceablecistern complete all as specified and as directed. |
| 63 | S&F inrepairs Towel Rail 600 mm long 20 mm dia , D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats. and fixed complete all as specified and as directed. |
| 64 | S&F in repairs sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 65 | S&FWall looking mirror of size 180 cm x 60 cm complete all as specified and as directed.Make :- Saint Gobain or equivalent approved make. |
| 66 | S&F in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed complete all as specified and as directed. |
| 67 | S&F in repairs Grating doom 100 mm dia of PTMT (Minimum weight 25gms) and fixed complete all as specified and as directed. |
| 68 | S&F brass chromium plated health faucet 15 mm dia reinforced pipe fitted to GI pipe complete all as specified and as directed.Make :- Parryware Cat No 19941A1 or equivalent approved make. |
| 69 | S&F inrepair for 15 mm dia Two way bib cock CP fancy type fixed to GI pipe complete all as specified and as directed.Make :-Parryware Cat No G3167A1 or equivalent approved make. |
| 70 | S &F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 or equivalent approved make. |
| 71 | Demolition / Dismantling of drain pipes any type at any position complete all as specified and as directed. |
| 72 | S &F 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed. |
| 73 | S &F 110 mm bore PVC (SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed. |
| 74 | S &F 75 mm bore PVC (SWR) bendcomplete all as specified and as directed. |
| 75 | S &F110 mm bore PVC (SWR) bend complete all as specified and as directed. |
| 76 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed. |
| 77 | S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed. |
| 78 | Taking up or down steel tubing and connections 15 mm bore of pipe,complete all as specified and as directed. |
| 79 | Taking up or down steel tubing and connections 20 mm bore of pipe,complete all as specified and as directed. |
| 80 | Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 81 | Supply and fix steel water tubing 20 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 82 | S & F inrepair 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including dismantling existing old water tankcomplete all as specified and as directed. |
| 83 | S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and as directed. |
| 84 | S&F in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and as directed. |
| 85 | S&F inrepair 25 mm dia anodisedalumimium alloy curtain rods with brackets,stops,rollers etc and taking down old pipe complete all as specified and as directed. |
| 86 | Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 87 | M&L for Rendering 15 mm thickon fair faces ofbrick work orconcrete surfaces in CM 1:4 and renderingis to be finished even and smooth (with out using extra cement) complete all as specified and as directed. |
| 88 | M&L forRendering 10 mm thickon fair faces ofbrick work orconcrete surfaces in CM 1:6 and rendering is to be finished even and smooth (with out using extra cement) complete all as specified and as directed. |
| 89 | M&L for Rendering 10 mm thick on fair faces ofbrick work or concrete surfaces in CM 1:3 and rendering is to be finished even and smooth (with out using extra cement) for ceilings complete all as specified and as directed. |
| 90 | Supply Only integralwater proofing compound complete all as specified and as directed. |
| 91 | M&L for preparation new surfaces of wallsand finishing walls with two coats of premium acrylic smooth exterior paint with silicone additives of required shade @ 1.43 Ltr / 10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 Sqm) using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fittings ,wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and as directed. |
| 92 | M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 93 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 94 | M&L for complete removal of existing treatment from walls including scrapping and removing the entire scales of existing treatment complete all as specified and as directed. |
| 95 | M&L for 2.0 mm thick wall care putty on wall surfaces finished even and smoothcomplete all as specified and as directed. |
| 96 | Description all as per Ser item No 95 above but on ceiling surfaces complete all as specified and as directed. |
| 97 | M&L for preparation ofsurfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer, white or tintedincluding removing of nails, making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and as directed. |
| 98 | M&L for preparation of old destempered and painted surfaces of ceilings including cornices and applying two coat of oil bound distemper over a coat of primer,white or tinted in high rise inside the hangars including removing of nails,making good holes,cracks,washing floors,cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy including necessary scaffolding required at site complete all as specified and as directed. |
| 99 | M&L for preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of varnish including cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and as directed. |
| 100 | M&L forpreparing old painted steel and iron surfaces of any description not exc 10 cm width or girth not otherwise described and applying one coat of aluminium paint including cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and as directed. |
| 101 | M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and as directed. |
| 102 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mtr length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanging from roof slab complete all as specified and as directed. |
| 103 | S&F hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastners 12.5 mm dia.40 mm long complete all as specified and as directed. |
| 104 | Providing and fixing Gypsum board 12 mm thick as in ceiling fixed with screws as per manufactures instructions complete all as specified and as directed. |
| 105 | M&L for cutting openings or grooves through stone/Brick walls built in cement mortar for door, windows & other openings or enlarging existing openings, etc. or cutting out defective masonry for underpinning including providing, fixing & removing, shoring, cleaning & stacking bricks & removing surplus to store & rubbishout of MOD land complete all as specified and as directed. |
| 106 | Removing existing treatment and cleaning the surfaces thoroughly by wire brush,air blower to remove loose mortar,dust,treat all visible cracks by making V groove,after cleaning groove fill the grooves with smart care hybrid polyurathane sealent and providing and applying cold applied elastomeric smart care damp proof ultra(fiber reinforced elastomeric liquid applied water proofing membrane) complete all as specified and as directed.Make :-Asian Paints smart care water proofing or equivalent approved make. |
| 107 | M&L for treating leakages from negative side by doing pressure grouting,forcing PVC nozzles along the length of the cracks in zig zag manner Inject non shrink cementitious grout through PVC nozzle in to the slab by the grout pressure pump allow it to cure as per stanard practice complete all as specified and as directed.Make :- Asian Paints smart care water proofing or equivalent approved make. |
| 108 | Removing excavated / demolished material exc 5 KM not exc 15 KM or out of MOD land and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 109 | S&F stainless steel (Grade 304) railing made of hollow tubes,channels,plates etc includingwelding, grinding ,buffing , polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories and stainless steel dash fastners,stainless steel bolts etc of required size,on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 110 | S & F MS framed work as in doors built In cup boards of angle (or) other sections with gusset plate rails braces etccomplete drilled for fixing of steelsheeting(or) other covering to doors etc to be prepared for hanging (or) sliding with and including either hooks and pintel hinges (or) steel hanging door etc. including covering sheet complete all as specified and as directed. |
| 111 | S&F 18 / 19 mm thickprelaminated particle board, exterior grade, prelaminatedboth side with decorative choice laminaion and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 112 | S&F brassmagnet catcher for cupboardcomplete all as specified and as directed. |
| 113 | S&F 18 / 19 mm thickparticle board for external teak wood lipping, 6 mm thick , fixed with nails complete all as specified and as directed. |
| 114 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 40 mmcomplete all as specified and as directed. |
| 115 | S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished complete all as specified and as directed. |
| 116 | M&L for MS Framed brackets of angles or tees For Bottom support to Cupboards with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under \"Structural Steel\") complete all as specified and as directed. |
| 117 | S&F 4.0 mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified and as directed. |
| 118 | SCHEDULE \"A\" PART - II (E&M PORTION) :- Taking down existing unserviceable point wiring of any description / type / size of light / fan / tube / power / two way / bell point etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified and depositing serviceable LEDtube at AGE E/M store for the following :- |
| 119 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 120 | M & L for Point wiring on concealed / surface conduit as required as per site condition as directed by engineer in charge with 1.5 Sq mm copper conductor single core PVC insulated FRLS 1100 Volts grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches / sockets / regulators etc complete all as specified and as directed. for the following :- |
| 121 | (a) One light point controlled by one, one way switch 5 A, SP |
| 122 | (b) One ceiling fan/Exhaust fan point controlled by one, one way switch and regulator |
| 123 | (c)One 2 / 3 pin 5 Amps socket outlet point controlled by one switch on the same board |
| 124 | (d) One 3 Pin 5 Amps switch socket Independent board |
| 125 | (e) One Bell point controlled by one Bell Push |
| 126 | (f) One light point controlled by two way switch |
| 127 | Description all as per Ser item No. 120 above but for one 16 Amps switch socket combination on independent board with 4 sqmm FRLScables for phase and neutral and 4 sqmm FRLS cable green in colour as earth continuity conductor complete all as specified and as directed. |
| 128 | S&Fmodular switchone way 6 Amps 230 volts,1 modulecomplete all as specified and as directed. |
| 129 | S&Fmodular switchtwo way 6 Amps 230 volts,1 modulecomplete all as specified and as directed. |
| 130 | S&Fmodular switchone way with indicator 16 Amps 230 volts,1 modulecomplete all as specified and as directed. |
| 131 | S&FmodularBell push 6 Amps 230 volts,1 modulecomplete all as specified and as directed. |
| 132 | S&Fmodular Fan regulator step type 2 module complete all as specified and as directed. |
| 133 | S&F modular socket2 in 1, 3 pin /5 pin ,6 Amps complete all as specified and as directed. |
| 134 | S&F modular socket3 pin,6 Amp-16 Amps combined shutteredcomplete all as specified and as directed. |
| 135 | S&F modular white cover plate with frame 1 module inclusive of inner & outer plate complete all as specified and as directed. |
| 136 | S&F modular white cover plate with frame 2 module inclusive of inner & outer plate complete all as specified and as directed. |
| 137 | S&F modular white cover plate with frame 3 module inclusive of inner & outer plate complete all as specified and as directed. |
| 138 | S&F modular white cover plate with frame 4 module inclusive of inner & outer plate complete all as specified and as directed. |
| 139 | S&F modular white cover plate with frame 6 module inclusive of inner & outer plate complete all as specified and as directed. |
| 140 | S&F modular white cover plate with frame 8 module inclusive of inner & outer plate complete all as specified and as directed. |
| 141 | S&F modular white cover plate with frame 12 module inclusive of inner & outer plate complete all as specified and as directed. |
| 142 | S&F Metal flush boxes 1 / 2 module for mounting modular inner & outer plate switches & sockets concealed in wall complete all as specified and as directed. |
| 143 | S&FMetal flush boxes 3 module for mounting modular inner & outer plate switches & sockets concealed in wall complete all as specified and as directed. |
| 144 | S&FMetal flush boxes 4 module for mounting modular inner & outer plate switches & sockets concealed in wall complete all as specified and as directed. |
| 145 | S&F Metal flush boxes 6 module for mounting modular inner & outer plate switches & sockets concealed in wall complete all as specified and as directed. |
| 146 | S&F Metal flush boxes 8 module for mounting modular inner & outer plate switches & sockets concealed in wall complete all as specified and as directed. |
| 147 | S&F Metal flush boxes 12 module for mounting modular inner & outer plate switches & sockets concealed in wall complete all as specified and as directed. |
| 148 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 mm x 50 mm complete all as specified and as directed. |
| 149 | Supply and fixLamp holder, PVC / Polycarbonatetype with back plate suitable for batten fittings complete all as specified and as directed. |
| 150 | Supply and fix Ding Dong Bell suitable for working on 230 Volts 50 HZ Supply complete all as specified and as directed. |
| 151 | Supply and Fix Gong Bell 16 inch suitable for working on 230 volts 50 Hz Supply complete all as specified and as directed. |
| 152 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 153 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and as directed. |
| 154 | Supply and fixing LED lights fitting 1x 20 W, 220 V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and as directed. |
| 155 | Supply and fixing LED luminaire 600 mm x 600 mm,35 / 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling/surface including connecting up with driver three core flexible copper conductor cases of suitable sizecomplete all as specified and as directed. |
| 156 | Disconnecting the 2 x 2 feet lght fittings / LED lights and fixtures from its original position for rewiring and again refixing after compeletion of work on original position complete with all accessoriesincluding connecting up with three core twisted flexible copper conductor cable with suitable sizecomplete all as specified and as directed. |
| 157 | Removing existing cable and wiringconnection of existing TPN DB 4 way (02 Nos) / SPN DB\"s (02 Nos) including MCB\"s , Servo voltage stabilizer,MCCB\"s, Changeover Switches,UPS etc from existing room and shifting to RT cabin Power room and refixing at a position as directedcomplete with rewiring of TPN DB\"s / SPN DB\"s / MCCB\"s /Changeover Switches etc complete all as specified and as directed. |
| 158 | Removing existing Distribution board TPN / SPN along with MCB\"s placed inside including wiring from its original position and refixing it at a position as directed along with complete rewiring etc complete all as specified and as directed. |
| 159 | Supply and fix heavy duty Exhaust Fan Copper wound with metal body, metal frame & metal blades of size 300 mm sweep, 1200 RPM suitable for working on single phase, 230 volts, 50 Hz AC supply complete including Louvers & suitable nuts & bolts and connecting cable from ceiling rose to exhaust fancomplete all as specified and as directed. |
| 160 | M&L for cutting round holes into or through stone walls built in cement mortar or cement lime mortar and walls of cement concrete of superficial area exceeding 400 sqcm but not exceeding 0.16 sqm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required for exhaust fan openingcomplete all as specified and as directed. |
| 161 | Supply and fix single pole and neutral enclosure (SPN) with a two pin and earth plug and socket complete with one single pole MCB of 20 / 25 Amps rating and management in multiple optics complete all as specified and as directed |
| 162 | Disconnecting and removingceiling fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, includingreplacement of wornout/defective parts, refixing in original position includingminor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc & testingcomplete all as specified and as directed. |
| 163 | Disconnecting and removing Exhaust Fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughlyprovision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of exhust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testingcomplete all as specified and as directed. |
| 164 | S & F Vertical type TPN DB 8 way double door with incoming as MCCB TP upto 160 Amps as requiredsuitable for 415 volts,16 KA breaking capacityAC 3 phase 50 Hz and suitabe for outgoing SP / TP with isolated neutral bar complete all as specified and as directed. |
| 165 | S & F Vertical type TPN DB 6 way double door with incoming as MCCB TP 63 to 100 Amps as requiredsuitable for 415 volts,16 KA breaking capacity AC 3 phase 50 Hz and suitabe for outgoing SP / TP with isolated neutral barcomplete all as specified and as directed. |
| 166 | S & F Vertical type TPN DB 4 way double door with incoming as MCCB TP 63 to 100 Amps as requiredsuitable for 415 volts,16 KA breaking capacity AC 3 phase 50 Hz and suitabe for outgoing SP/TP with isolated neutral barcomplete all as specified and as directed. |
| 167 | S & F Sheet metal enclosure MCBDB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with flush type system complete all as specified and as directed. |
| 168 | S & F Sheet metal enclosure MCBDB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with flush type system complete all as specified and as directed. |
| 169 | Supply and Fix MCB SPN 40 Amps suitable for fixing in MCB DB complete all as specified and as directed. |
| 170 | Supply and Fix three pole MCCB suitable for fixing on TPN DB of 25 to 100 Amps 415 volts 16KA complete all as specified and as directed. |
| 171 | S & F MCB SP 6 to 32Amps 240 volts 10 KA \"C\" seriesfor fixing in MCB DB\"scomplete all as specified and as directed. |
| 172 | M & L for Submain wiring concealed or surface as per site conditions as directed by Engineer- in- Charge with two single core 4.0 Sq mm PVC insulated FRLS unsheathed copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories suitable dia medium grade including running up of 4.0Sq mm copper conductor multistranded PVC insulated FRLS cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing complete all as specified and as directed. Note :- Two runs of 4 sqmm cable, one run of 4 sqmm earth contuinity conductor and one run of conduit shall bemeasured as one unit length. |
| 173 | M & L for Submain wiring concealed or surface as per site condition as directed by Engineer -in - Charge with two single core 6.0 Sq mm PVC insulated FRLS unsheathed copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories of suitable dia medium grade including running up of 6.0Sq mm copper conductor multistranded PVC insulated FRLS cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing complete all as specified and as directed. Note :- Two runs of 6 sqmm cable, one run of 6 sqmm earth contuinity conductor and one run of conduit shall bemeasured as one unit length. |
| 174 | M & L for Submain wiring concealed or surface as per site condition as directed by Engineer- in- Charge with four runs of single core 10.0 Sq mm PVC insulated FRLS unsheathed copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories of suitable dia medium grade including running up two runs of 10Sq mm copper conductor multistranded PVC insulated FRLS cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing complete all as specified and as directed. Note :- Four runs of 10 sqmmcable, two runsof 10 sqmm as earth contuinity conductor and one run of conduit shall bemeasured as one unit length. |
| 175 | M & L for Submain wiring concealed or surface as per site condition as directed by Engineer- in- Charge with four single core 16.0 Sq mm PVC insulated FRLS unsheathed copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories of suitable dia medium grade including running up two runs of 16Sq mm copper conductor multistranded PVC insulated FRLS cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing complete all as specified and as directed. Note :- Four runs of 16 sqmm cable, Two run of 16 sqmm as earth contuinity conductor and one run of conduit shall bemeasured as one unit length. |
| 176 | Supply and fixing LED securitylight fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal IP 65 / 66 protection complete including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction boxcomplete all as specified and as directed. |
| 177 | S & Fbracket for security light made out of GI pipe 40 mm dia bore not less than 1.2 mtr long and fixed on walls / poles with 2 Nos MS clamps made out of MS flat 40 mm x 5 mm thick complete with MS nuts, bolts and washers etc complete all as specified and as directed. |
| 178 | Supply & fixing in replacement of LT XLPE insulated strip armoured multi stranded aluminium underground cable of 95 Sqmm, 3.5 core in trenches or fixed on pole/wall or drawn through pipes including suitable size of Lugs and Glands etc complete all as specified and as directed. |
| 179 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting in hard / dense soil for laying of cables / for erection of poles / for stay assembly etc complete all as specified and as directed. |
| 180 | Supply and spread clean dry river sand in trenches for cushioning of cables etc complete all as specified and as directed. (Note :-Punned down thickness only shall be measured for the purpose of payment) |
| 181 | Supply and laying Sub Class \"B\" bricks laid dry and flat old size across the length of cable for protection of cable complete all as specified and as directed. |
| 182 | Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed. |
| 183 | Removing surplus excavated material to a distance not exc 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 184 | Material and labour for 80 mm dia bore tubes, \"light grade\" galvanised, with all fitting and fixed complete to walls / poles or laid in trenches / floors for cable protection etc complete all as specified and as directed. |
| 185 | M&L for Earthing complete with galvanised steel earth plate electrode 600 mm x 600 mmx 6.0 mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GIearth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling complete including testing on completion complete all as specified and as directed.(Note :-GI pipe 15 mm dia & GI earth lead 4 mm dia upto 7.5 m length is deemed to be included in unit quoted rate) |
| 186 | Supply and fix earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 mm x 6 mm Copper earth strip complete all as specified and as directed. |
| 187 | Supply and fix earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etcas required 4 mm dia galvanised iron wire complete all as specified and as directed. |
| 188 | Taking down carefully the indoor and outdoor unit alongwith voltage stabilizer of Split Type Air Conditioner of capacity upto 2.0 TR by disconnecting all electrical connections, suction and discharge lines fromits installed position and shifting to another location where directed and installing the indoor and outdoor units alongwith stabilizer at specified location and connecting all the electrical, suction and discharge lines and filling of gas/ replacement of copper tube as required at site and testing on completion for proper functioning complete all as specified and as directed. |
| 189 | Material and labour for making hole in to the wall , stone masonary / brick work up to 80 mm dia for installing / fixing of split type AC with and including making good the surface smooth with cement mortar as per existing specifications complete all as specified and as directed. |
| 190 | Supply and fixing pre-fabricated MS bracket assembly (Set of Two) complete with nuts and bolts of suitable size for fixing of split type Air Conditioners outdoor unit complete all as specified and as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
