|
| 1 | Civil work : Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenchesand other civil works upto and including 2.4metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. - Hard soil |
| 2 | Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenchesand other civil works upto and including 2.4metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. - Stoney Earth |
| 3 | Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenchesand other civil works upto and including 2.4metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. - Ordinary Earth |
| 4 | Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction ofEngineer-In-charge. |
| 5 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead as per the direction of Engineer-in-charge. |
| 6 | Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead as per the direction of Engineer-in-charge. |
| 7 | Dismantling and removing 2.5cm thick A.S. flooring including stacking the useful materials for reuse and removing the debris within 50m lead as per the direction of Engineer-in-charge. |
| 8 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead as per the direction of Engineer-in-charge. |
| 9 | Dismantling and removing Grading Plaster from roof including stacking the useful materials for reuse and removing the debris within 50m lead as per the direction of Engineer-in-charge. |
| 10 | Dismantling and removing old lime cement plaster from wall including stacking the useful materials for reuse and removing the debris within 50m lead as per the direction of Engineer-in-charge. |
| 11 | Cement concrete of proportion (1:4:8) in F&F using 40mm size bhg metal of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect . |
| 12 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position - Foundation & Pedestal (Ground Floor) |
| 13 | Column pedestal to plinth |
| 14 | Plinth |
| 15 | Column Beam |
| 16 | Roof slab (GF) |
| 17 | Chajja (GF) |
| 18 | Lintel (GF) |
| 19 | Straightening, cutting, bending, binding tor steel rods, cranking, hooking, tying the grills & placing in proper position for R.C.C work, including cost ofbinding wires of 18 to 20 gauge, cost, conveyance, taxes of steel and all other materials, cost of all labour with T&P required for the work etc. complete. - Ground Floor |
| 20 | Fly Ash Brick work with Fly Ash Bricks of 23cm.x 11cm.x 8cm. size having crushing strength not less than 75 Kg/Cm2 in cement mortar (1:6) in Foundation & Plinth including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, taxes & royalties of all materials, labour with T&P etc. complete in all respect and as per the direction of Engineer-in-charge. |
| 21 | Fly Ash Brick work with Fly Ash Bricks of 23cm.x 11cm.x 8cm. size having crushing strength not less than 75 Kg/Cm2 in cement mortar (1:6) in Superstructure including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, taxes & royalties of all materials, labour with T&P etc. complete in all respect and as per the direction of Engineer-in-charge. |
| 22 | 12mm cement plaster on external RCC/brick surfaces incement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights as per the direction of Engineer-in-charge - Ground Floor |
| 23 | First floor |
| 24 | 16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights as per the direction of Engineer-in-charge - Ground Floor |
| 25 | First floor |
| 26 | 6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights as per the direction of Engineer-in-charge - Ground Floor |
| 27 | First floor |
| 28 | Providing and layingVetrifiedfloor tiles 600x600 mm (thickness to be specified by the manufacturer) premium 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction ofEngineer-In-charge at all floors and all heights. (Basic Rate Tile-100/Sqft) - GF |
| 29 | Providing and layingVetrifiedSkirting tiles 600x600 mm (thickness to be specified by the manufacturer) premium 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction ofEngineer-In-charge at all floors and all heights. - GF |
| 30 | Supplying, fitting and fixing of ceramic tile of 30cm x 30cm in floors of approved make conforming to IS:13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour and T&P required for the work etc. complete as per the direction of Engineer-in-charge - GF |
| 31 | First floor |
| 32 | Fixing of granite tiles of 12mm thick in floors, Trades of steps & Landing over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect as per the direction of Engineer-in-charge - GF |
| 33 | Fixing of Ceramic tile in Dado with with cement morter (1:3) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect and as per the direction of Engineer-in-charge - GF |
| 34 | First floor |
| 35 | Providing and applying Acrylic wall putty of average thickness 1 mm of approved brand and manufacturer,over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete - GF |
| 36 | First floor |
| 37 | Second floor |
| 38 | Providing & Applying priming one coat with approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete - GF |
| 39 | First floor |
| 40 | Second floor |
| 41 | Preparing surface and painting at all height with two coats of interior Plastic Emulsion \"Royale Shyne\" of Asian Paints or equivalent of approvedshade as per the instructions of the manufacturers; giving uniform shade etcin all heights of walls etc. including interiorwall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge - GF |
| 42 | First floor |
| 43 | Second floor |
| 44 | Providing and applying to outside walls with two coats ofAnti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-charge at all elevations including all material labour complete - GF |
| 45 | First floor |
| 46 | Second floor |
| 47 | Dismentalling & removing doors windows & ventilators including removal of frames, hinges, fastening & stacking the same for re-use and removing the debris with in 50m lead, including cost of all labour with T&P etc. Complete and as per the direction of Engineer-in-charge - Ground Floor - Door |
| 48 | First floor |
| 49 | Dismentalling & removing doors windows & ventilators including removal of frames, hinges, fastening & stacking the same for re-use and removing the debris with in 50m lead, including cost of all labour with T&P etc. Complete and as per the direction of Engineer-in-charge - Ground Floor - Window |
| 50 | First floor |
| 51 | Dismentalling & removing doors windows & ventilators including removal of frames, hinges, fastening & stacking the same for re-use and removing the debris with in 50m lead, including cost of all labour with T&P etc. Complete and as per the direction of Engineer-in-charge - Ground Floor - Ventilator |
| 52 | First floor |
| 53 | Providing and fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (Fenesta/NCl/Veka Ltd) Three Track-Three Panel Sliding window -60- series duly manufactureed using upvc reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of Saint-Gobain make duly fixed with EPDM weathering seal resistant and the System is to be installed using reinforcement large coupler at the site using anchor fasteners, silicon, rubber, sealant, easy glazing/Deglazing at site etc. including cost and conveyance of all materials accessories labour charges amterials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standardsWindow - GF |
| 54 | Ventilation |
| 55 | Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (Allsteel sections contractor\"s own supply) at all floors and all heights -Ground Floor |
| 56 | Providing and laying grading conc. 4cm (avg. thickness) cement concrete of required slope of mix 1:2:4 mixed with approved water proof compound as per manufacturer\"s specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor - GF |
| 57 | First floor |
| 58 | Providing fitting fixing of approved make 35mm thick (Laminated Finished) factory made Flush Doors,of different sizesfinished with 1mm thick laminate of approved shade and colour to both sides fixed to teak wood beading/ liping as per the design, whereever necessary the glazing portion of the door will be made out of 6mm thick glass with itiching as required to be fixed with 50x18mm/48x24mm teak beading finished with melamine polish / 1mm thick laminate.. The glass jointing shall be tightened with silicon or approved jointing material for proper rigidity. The door shall be provided with all necessary fittings and fixtures, i.e Godrej Ultra Veritibolt Lock (Model 1 CK) ,125x75x3 mm SS204 Hinges, approved make Door closer,Door Stoper etc with all accessories, labour T&P etc complete -Door |
| 59 | Window |
| 60 | Providing & Fixing of WPC Door Frame size 4\" x 2.5\" having density 725kg/m3, make up of virgin polymer, wheat and rice husk fiber and Calcium silicate. 100% water proof, termite proof and fire retardant made of Alstone Chaukhat. The door will be provided with all necessary fitting & fixture of approved hardware and all materials complete as per direction of the Engineer-In-Charge - GF |
| 61 | Supplying, fitting, fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. c/c and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer in Charge. - GF |
| 62 | Providing & fixing Calcium silicate board ceiling suspended from roof by adjustable G.I. ceiling angle with spread at a distance not more than 600mm fixed to roof by Rowl Plug & stiff cleat, Gupsum board 12.5mm thick held by G.I. perimeter channel MF-3 & intermediate channel MF-7, framing, boarding, jointing & finishing with special type of gypsum compound etc. including cost , conveyance & taxes of all materials, labour with T&P etc. complete in all respect as per the direction of the Engineer-in-charge - GF |
| 63 | First floor |
| 64 | Providing & Fixing of Mineral Fibre Board of microperforated,finely granulated surface texture, beveled tegular edge with 6mm Black Revealedexposed grid Suspended False Ceiling System,with tiles of Humidity Resistance (RH) of 99%, NRC Upto 0.5, awvalue 0.6, CAC- 34dB ,Light Reflectance >85%, thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class- 0/ Class -1 (BS476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile,suitable for Green Building application, with Recycled content of 63%, fixed to G.I.grids of system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm , having stiches both perpedicular and horizontal to make it stronger, and a load carrying capacity of minimum 15.68 Kgs/Sqm. The Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 120 grams per SQM complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer-in-charge.Rate shall include, providing openings (with additional grid members, duly supported from the soffit) for light fittings, Diffusers, etc. (Fixtures should be independently supported from the soffit). |
| 65 | Supplying, fitting and fixing and installation of Bio Guard Mineral Fiber 600 x 600 16mm beveled edge with silhouette grid of Armstrong make especially for hospital OTS & Labour rooms. The cost includes boards, running tracks, channels, labour T&P etc. complete as per the direction of Engineer-in-charge |
| 66 | Supplying, fitting and fixing and installation of metal works baffle blade 100x50mm wood red oak/ cherry with accessories Armstrong make. The cost includes boards, running tracks, channels, labour and T&P etc. Complete as per the direction of Engineer-in-charge. |
| 67 | Providing, fitting and fixing of Vinyl, Antistatic floor panelling of wonder floor make with sheet thickness of 2mm especially made for hospital as directed by the Engineer-in-charge/ Architect. The cost includes material, labour and fixing etc with all accessories etc. complete as per the direction of Engineer-in-charge. |
| 68 | Providing, fitting and fixing of Vinyl, Wallspro panelling of wonder floor make with sheet thickness of 1mm especially made for hospital as directed by the Engineer-in-charge/ Architect. The cost includes material, labour and fixing etc with all accessories etc. complete as per the direction of Engineer-in-charge. |
| 69 | Providing, fitting & fixing of OT Antimicrobial PVC Sheet 2.5mm thick panelling of altro/jemiclad/bioclad/amclad/gohealth branded make especially made for hospitals as directed by Engineer In Charge/ Architect. The cost includes, material, labour & fixing etc with all accessories, T&P etc complete. |
| 70 | Fixing of Vitrified full body floor/wall tiles of premium grade having thickness 8mm to 10mmof size 60cm x 60cm multiple coloursin floors & walls of Kajaria/Donato/marfir/johnson branded make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm & filling joints with epoxy grout of approved quality including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 71 | Supplying, fitting, fixing and installation of hospital bed head panel of 5\"-0\" in width powder coated aluminium extrusion materials with both side round edging, provisions for gas pipe lines and electric switch points to be provided. The cost included all accessories, panel, fixing cost, labour and T&P etc. complete Saras Brand as per the direction of Engineer-in-charge. |
| 72 | Supplying, fitting and installation of dual colour retroreflective pu coated hand railing and wall guard fitted in the walls, height of the railing bar is 152mm. The cost includes all accessories, bolting, fittings, labour and T&P etc. Complete as per the direction of Engineer-in-charge. |
| 73 | Providing fitting fixing wooden panelling to Doors and Windows, whereever necessary panelling will be done with 12mm & 19mm fire resistant & termite proof BWP ply (confirming to I.S 5509) wherever required to be provided and finished with 1mm thick laminate of approved shade and colour as per the drawing. The rate inludes cost of cut-outs, fixation,other accessories, labour T&P etc complete. |
| 74 | Providing fitting fixing wooden panelling to walls, whereever necessary panelling will be done with 12mm & 19mm fire resistant & termite proof BWP ply(confirming to I.S 5509)wherever required to be provided and finished with 1mm thick laminate of approved shade and colour as per the drawing. The rate inludes cost of cut-outs, fixation,other accessories, labour T&P etc complete. |
| 75 | Providing waterproofing for Toilet/SukenSlab:- Cleaning the inside surface &Application of two coats of Nerolac/sika Top seal 109 hi @ 2.2 Kg/Sqm.Over the bottom slab & side wall surface to protect against leakage & seepage finally covered with a cement mortar (1:4). make coving over floor to wall joints over a bond coat sika latex (1:4:6) & proper care should be taken to fill the pipe penetration points with sika Gard 694 fi (moisture resistance epoxy putty) complete as per manufacture specification and direction of Engineer-In-Charge.Note : All the waterproofing treatment shall be executed though a recognized water proofing agency approved by the engineer in charge . A written guarantee on non-judicial stamp paper shall be submitted by the contractor for a minimum period of 5(five) years from the certified date of completion for the satisfactory performance of the entire waterproofing treatment system. |
| 76 | E.I. Work : Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (Make of modular box,cover,switch & socket-Legrand Myrios/schneider opale/Eq) With 10Years Warenty - Group-C |
| 77 | Recessed wiring to secondary light pointlooped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)Average Length: 3mtr |
| 78 | Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)Group B |
| 79 | Recessed wiring to Twin control light pointwith 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)Group C |
| 80 | Recessed wiringfor 5 / 6 amp socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer-in-charge. |
| 81 | Recessed wiringfor 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Finolex /Polycab/ Anchor / Havels/Eq)Group C |
| 82 | Recessed wiringfor2 x 6 amp socket outlet controlled by 2 nos6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 83 | Recessed wiringfor 6 pin 16 amp socket outletwith 16Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer-in-charge. 25Nos for Stage Light,3Nos For Aquaguard. |
| 84 | Recessed wiringfor A.C/ Power socket outletwithindustrial type socket outlet,plug top and metal chained cover in sheet steel enclosure,20A/32A SP MCBincluding all accesories and connection as per direction of Engineer-in-charge. |
| 85 | Call bell point |
| 86 | Recessed wiring to submain in 4 x 16 sq.mmFRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 50 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) |
| 87 | Recessed wiring to submain in 4 x 10 sq.mmFRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex /Polycab/ Anchor / Havels/Eq) |
| 88 | Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) |
| 89 | Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) |
| 90 | Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) |
| 91 | Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (For Switch Board Looping) |
| 92 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid tripposition for toggles for electrical fault conditions.(With 5Years Warenty) Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted6 way TPN Distribution Boards For PDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-63AFPMCB (10KA)Outgoings-10/20A SP MCB 10KA-18Nos.(Make-L&T/ Schneider/Legrand/Eq) |
| 93 | Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of3.5core 300 sq.mm direct in groundincluding excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq) |
| 94 | Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of3.5core 185 sq.mm direct in groundincluding excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq) |
| 95 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 50 sq.mm direct in groundincluding excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq) |
| 96 | Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of4 core 16 sq.mm Aluminium on surface as required.(Make-polycab/RR Kable/Rhino cable/Eq) |
| 97 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required - 3.5C x 300 sq.mm |
| 98 | 3.5C x 185 sq.mm |
| 99 | 3.5C x 50 sq.mm |
| 100 | 4C x 16 sq.mm |
| 101 | Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp,C.T , Digital Voltmeter,Digital Ammeter and control fuse etc. complete.MAKE- Legrand / Schneider/ L&T/SIEMENS/Eq. - MAIN PANELwith400A 4P MCCB 50KA -1 Nos &,400A 4P Change Over Switch 1Nos as income 100A 4P MCCB 25KA 12Nos, 250A 4P Change over Switch 1Nos, 63A 4P MCCB 25KA 12Nos. with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP MCB. |
| 102 | Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp,C.T , Digital Voltmeter,Digital Ammeter and control fuse etc. complete.MAKE- Legrand / Schneider/ L&T/SIEMENS/Eq. - EXT Light DB with 63A 4P MCB (10KA) -1 No as incomer, 1Nos Timer Switch ,20A SP MCB 10KA-12 Nos, 20A DP MCB 10KA 6Nos. as Outgoing with E.C Busbars . |
| 103 | Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp,C.T , Digital Voltmeter,Digital Ammeter and control fuse etc. complete.MAKE- Legrand / Schneider/ L&T/SIEMENS/Eq. - PUMP Panel Boardwith 63A 4P MCB (10KA) as Incomer , Outgoings-32A 4P MAB 10KA-2Nos, 20 A DP MCB 10KA-3Nos,withE.C Busbars. |
| 104 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required. |
| 105 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. |
| 106 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required. |
| 107 | Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required. |
| 108 | Supply & fixing of lightning Finial 25mm dia x 300 mm long cupper, |
| 109 | Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.Make-Bajaj/philips/wipro/Panasonic/JAQUAR/halonix/k lite/Eq.With 5Years Warenty. Ceiling mounted indoortypebatten typeLED Luminaire with LED Lamp Similar to JAQUAR Cat No. LGLZ01X024XWor equivalent. |
| 110 | Ceiling/ Wall mounted typeBULK HEADLuminaire withSimilar to JAQUAR Cat No.LBLK02X010XW or equivalent. |
| 111 | Supply, Installation, testing and commissioning of 10W Mirror Light |
| 112 | Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required. |
| 113 | Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etcas required. |
| 114 | Supply &fixing of 12W LED Down Light (S) similat to Jaquar Cat no-LNVE02R012SW/EquivalantWith all accessories. |
| 115 | Supply &fixing of LED 36w 2\"x2\" Surface Mounted Light similar to jaquar cat no-LSVR01S036SW / Equivalent. etcas required . |
| 116 | Supply, Installation, testing and commissioning of45W Premises LED Light. |
| 117 | Supply &fixing of 5W LED Wall Decorative LIGHT |
| 118 | Supply &fixing of USHA Wall Fan 300MM HELIX MEGA High Speed /EquivalantWith all accessories. |
| 119 | Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 1.6 mm. Support sizes similar to ladder type trays - Size of Cable Tray :300 mm x 50 mm |
| 120 | Supplying and fixing ofclip in type modular Telephone socket ISI markedmounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge. |
| 121 | Supplying and fixingof clip in type modular T.V. antenna socket ISI marked onmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge. |
| 122 | Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessedPVC conduit as required. |
| 123 | Recessed wiring to television point withcable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessedPVC conduit as required as per direction of Engineer in Charge. |
| 124 | Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required - 20mm |
| 125 | Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deepon surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.( Tel junction Box) |
| 126 | Supplying & Commissioning of Telephone Hand Set. |
| 127 | Supplying & installationof 50 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages. |
| 128 | Supplying & installationofMatrix EPABX System For 100 extension line and 2 trunk line as required. |
| 129 | Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate. |
| 130 | Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate. |
| 131 | Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate . |
| 132 | Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. |
| 133 | Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. |
| 134 | Supply of 125KVA Silent DG set comprising of M&Mmake Engine Model 61565G,156BHP@NTP, 1500 RPM, coupled to 125KVACrompton Greaves/ Mahindra approved make 3phase 415V, 50 Hz alternator mounted on a commonBase frame along with other accessories i.e., Fuel tank,AMF Control Panel, Battery with leads and acousticenclosure. |
| 135 | DISPLAY/TV SET (size 50 inch) :- Providing, supplying and Testing,commissioning of colour high resolution large Display DISPLAY/TVpanel of 50 inch full HD & all related fittings complete all as directionof the Engineer-In-Charge. The rate include |
