Rural Engineering Services-RES has published Tender For Construction Work Of Outlet And Urban Livelihood Center To Display The Products Of Self-Help Groups.. Submission Date for this Tender is 03-05-2023. Building Work Tenders in almora Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical / manual means in foundation trenches or drains i/c lift upto 1.5m, i/c disposal of surplus excavated soil within a lead of 50 m. |
| 2 | P/L in position CC 1:4:8(1 Cement:4 c/sand : 8st.agg. 40 mm size) excluding the cost of c/shuttering - All work upto plinth level. |
| 3 | RR stone masonry with hard stone in foundation and plinthi/c levellingup with CC 1:6:12 (1 cement: 6 coarsesand : 12 stone agg. 20mm size) at plinth level with cement mortar 1:6 (1 cement : 6 c/sand). |
| 4 | P/L in position RCC 1:1.5:3 excluding the cost of c/shuttering finishing and reinf All work upto plinth level(in foundation) |
| 5 | R.C.C work 1:1.5:3 in wall plinth and string courses column pillars piers abutments posts & struts etc upto floor five levelex. Cost of c/shuttreing, finishing and reinf. |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 |
| 7 | Centering and shuttering i/c strutting propping etc and removel of form for foundations footings bases of columns etc for mass concrete. |
| 8 | Centering and shuttering i/c strutting propping etc and removel of form for Suspended floors roofs landings balconies and access platform. |
| 9 | Centering and shuttering i/c strutting propping etc and removel of form for lintels beams plinth beams girders bresssumers and cantilevers. |
| 10 | Centering and shuttering i/c strutting propping etc and removel of form for columns pillars piers abutments posts and struts. |
| 11 | Centering and shuttering i/c strutting propping etc and removel of form for stairs. |
| 12 | Reinforcement for R.C.C work i/c straightening cutting bending placing in position and binding all complete- Thermo Machanically treated bars. |
| 13 | Brick work with FPS bricks bricks of class desigation 75 in super structure above plinth level upto floorv level in cement mortar 1:6 |
| 14 | 12 mm cement plaster of mix 1:6 cement and Fine sand mortar |
| 15 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete |
| 16 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size etc complete. |
| 17 | P/F glass strips in joints of terrazo- 40 mm wide and 4 mm th. |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand)Size of Tile 600x600 mm |
| 19 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand)Size of Tile 600x600 mm |
| 20 | Structuralsteelworkriveted,boltedorweldedinbuiltup sections,trussesandframedwork,i/ccutting,hoisting,fixing in position & applying a priming coat of approved steel primer all complete. |
| 21 | P/F 35 mm th. ISI marked flush door shutters i/c butt hinges with necessary screw non decorative type. |
| 22 | P/L in position CC 1:2:4 in bed blocks etc excluding te cost c/shuttering uoto floor five level |
| 23 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter |
| 24 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Shoe (Plain) |
| 25 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplas-ticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 110 mm |
| 26 | Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with :4.0 mm thick glass panes |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 28 | Distempering with oil bound washable distemper of app brand( two or more coats) to given an even shade on new work over and i/c priming coat with cement primer. |
| 29 | PaintingwoodworkwithDeluxeMultiSurfacePaintofreq. shade (Twoor more coats) applied over an under coat of primer approved brand. |
| 30 | PaintingSteel workwithDeluxeMultiSurfacePaintofreq. shade (Twoor more coats) applied over an under coat of primer approved brand.(125.80-50.70=75.10) |
| 31 | P/F ISI marked alluminium sliding door bolts anodi coating not less thengrade AC 10 as per IS:1868 transperent or colour or shade with nuts and screw etc complete300x16 |
| 32 | P/F ISI marked alluminium tower bolt anodised (a not less then grade AC 10 as per IS:1868) transperent or colour or shade with nuts and screw etc complete250x10 |
| 33 | P/F ISI marked alluminium Handles anodised (a not less then grade AC 10 as per IS:1868) transperent or colour or dyed to req less then grade AC 10as per IS:1868) with necessary screws etc complete:125 mm |
| 34 | P/FM.S.Tubularframesfordoors,windows,ventilatorsandcupboardwithL-Typesectionmadeof 1.60mmthickM.S.Sheet,jointsmitredandweldedandgrindedfinish profilesrequiredsizewith15x3mmlugs10cmlongembeddedin CCblocks15x10x10cmof1:3:6 necessary butt hinges and screws and applying a priming coat of approved steel primers. |
| 35 | providing and fixing G.I. pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall 15 mm dia. Nomminal bore. |
| 36 | providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) 20 mm nominal bore. |
| 37 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 38 | providing and fixing C.P. brass angle valve for basin mixer and geyser points of appoved quality conforming to IS: 8931 15mm nominal bore. |
| 39 | providing and fixing PTMT grating of approved quality and colour Circular type 100mm nominal dia. |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 41 | providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. flexible pipe 32mm dia. |
| 42 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore |
| 43 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 44 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 |
| 45 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 |
| 46 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank,, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 47 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mmExtruded section profile size 48x40 mm |
| 48 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. |
| 49 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 50 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections Anodised aluminium (anodised transparent or dyed to required shade |
| 51 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Second class teak wood |
| 52 | Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. |
| 53 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid |
| 54 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 55 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 56 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good |
| 57 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 |
| 58 | Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre. |
| 59 | Extra for pre finished nosing to treads of steps of marble stone. |
| 60 | Excavation in hilly area in soil by manual means i/c cutting and timbering of side slopes and dispsing of excavated eart with lift upto 1.5 m and a lead upto 20 m. |
| 61 | Excavation in foundation for retaining & breast walls in all types of soils and rocks i/c lead, lift and disposal of surplus material. |
| 62 | RRstone masonary laid in 1:6 cement and sand mortar in breast, retaining walls etc. i/c supply of all materials, labour, T&P and royalties etc. |
| 63 | Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls,etc. including supply of all material, labour, T&P and royaltiies etc. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
