Tender For Supply And Installation Of Auditorium Chair At Mission Shakti Bhawan At Pokhariput, Bhubaneswar, bhubaneswar-Odisha

Supply And Installation Of Auditorium Chair At Mission Shakti Bhawan At Pokhariput, Bhubaneswar , Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Auditorium Chairof Godrej Makeglamour Nxt High Back With Cup Holder Fl 10- Earth Stone Fabric Consisting Of Followingseat Rest Assembly: The Seat Rest Assembly Is 1.5±0.1 Cm Thk. Flat Plywood Measured In-Situ Moulded With Polyurethane Foam & Upholstered With Polyester Fabric And Enclosed By An Injection Moulded Cover. The Seat Has Anauto-Tip Up Feature Making It Stay In Upright Position When Not In Use Enabling Clear Row Passage.The Seat Profile Has A Large Waterfall Edge To Help The Users Get Necessary Comfort In Poplitealregion.*Seat Size: 45.0 Cm. ( W ) X 50.5 Cm ( D ) X 13.8 Cm ( T ) Approx.Backrest Assembly:The Backrest Assembly Is Made Up Of 1.2±0.1Cm Thk Flat Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 Upholstered With Polyester Fabric And Enclosed By An Injection Moulded Back Cover. The Back Foam Is Designed With Contoured Back Support For Extra Comfort.*High Back Size: 48.7 Cm. ( W ) X 76.9 Cm ( H ) X 12.5 Cm ( T ) Approx. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam For Seat And Back Is Moulded With Density = 45 + / - 2Kgs / M³. Leg Frame Assembly: The Leg Frame Assly Is Fabricated From M.S. Tube 6.0±0.03Cm X 4.0±0.03Cm X 0.2±0.016Cm Thk. Welded With Grouting Member. It Is Black Powder Coated ( Dft 40-60 Microns ) & Grouted To The Floor Using Anchors.Armrest Assembly: The Armrest Is Made Up Of Black Integral Skin Polyurethane With 65+ / -10 Shore A Hardness And Reinforced With M.S. Insert Fixed With Leg Frame. The Armrests Are Scratch And Weather Resistant. The Armrest Is Available With Cup Holder.Armrest Cladding:The Armrest Cladding Is Made Up Of 0.9±0.1 Cm Thk Plywood & Upholstered With Polyster Fabric. The Cladding Is Fixed To Aisle Side Panel Only. All In Between Panels Will Not Have Armrest Cladding.Powder Coating: All Steel Components Are Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) Flooring Pre-Requisite : The Auditorium Chair Is Designed To Get Mounted / Grouted On Floors With Flooring Specification As Mentioned In Flooring Pre-Requisite Godrej Doc-No: Stg 129368. Complete As Per Approved Drawing And Specification Including Cost Of All Materialslabour And Transportation As Per Direction Of Engineer In Charge ( Excluding Gst ) , N.B - The Bidders Are Required To Quote Their Rates Excluding Of Goods & Service Tax ( Gst ) . Gst As Applicable Will Be Paid Extra. The Existing Rule Of Govt. And Any Amendment Made In Future Will Be Followed.

INR 10000 /-

INR 71000.0 /-

Refer document

Name of Work:Supply & installation of Auditorium Chairat Mission Shakti Bhawan at Pokhariput, Bhubaneswar

Sl. No.	Item Description
1	Supplying and placing ergonomically designed, comfortable & aesthetically appealing Auditorium chairof Godrej makeGLAMOUR NXT High Back With Cup Holder FL 10- Earth Stone Fabric Consisting of followingSEAT REST ASSEMBLY: The seat rest assembly is 1.5±0.1 cm thk. flat plywood measured in-situ moulded with polyurethane foam & upholstered with polyester fabric and enclosed by an injection moulded cover. The Seat has anauto-tip up feature making it stay in upright position when not in use enabling clear row passage.The seat profile has a large waterfall edge to help the users get necessary comfort in poplitealregion.*SEAT SIZE: 45.0 cm. (W) x 50.5 cm (D) x 13.8 cm (T) Approx.BACKREST ASSEMBLY:The backrest assembly is made up of 1.2±0.1cm thk flat plywood measured as per QA method described in OCP-QLTA-P14-18 upholstered with polyester fabric and enclosed by an injection moulded back cover. The back foam is designed with contoured back support for extra comfort.*HIGH BACK SIZE: 48.7 cm. (W) x 76.9 cm (H) x 12.5 cm (T) Approx. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for Seat and Back is moulded with Density = 45 +/- 2kgs/m³. LEG FRAME ASSEMBLY: The leg frame assly is fabricated from M.S. tube 6.0±0.03cm x 4.0±0.03cm x 0.2±0.016cm thk. welded with grouting member. It is black powder coated ( DFT 40-60 microns ) & grouted to the floor using anchors.ARMREST ASSEMBLY: The armrest is made up of black integral skin polyurethane with 65+/-10 Shore "A" hardness and reinforced with M.S. insert fixed with leg frame. The armrests are scratch and weather resistant. The armrest is available with cup holder.ARMREST CLADDING:The armrest cladding is made up of 0.9±0.1 cm thk Plywood & upholstered with polyster fabric. The cladding is fixed to Aisle Side panel Only. All in between panels will not have armrest cladding.POWDER COATING: All steel components are Epoxy Polyester Powder Coated (DFT 40-60 microns)FLOORING PRE-REQUISITE : The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. complete as per approved drawing and specification including cost of all materialslabour and transportation as per direction of Engineer in charge (Excluding GST)
2	N.B - The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed.