Public Works Department-PWD has published Tender For Providing Pediatric Oxygen On Supported Beds And Ahu For Hdu Beds At Civil Hospital Narnaul. Submission Date for this Tender is 26-04-2023. Pure Elemental Gases Tenders in narnaul Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | [12.157.1.1]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fastenersto be paid for separately) : 1.1. For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 2 | [12.157.2.1]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fastenersto be paid for separately) : 2.1. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 3 | [12.158.2]Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 2. Pre-laminated particle board with decorative lamination on both sides |
| 4 | [13.28]Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 5 | [23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA |
| 6 | [23.22.2.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.1. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP |
| 7 | [6.2.1]Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing: 1. 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 8 | [9.22.2]Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 2. 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 9 | AHU AND AIR COOLING CONDENSING UNIT WITH ELECTRICAL CONTROL PANEL CAPACITY 11TR |
| 10 | SITC of Air4bar Outlets with matching probes, as per HTM-2022/02-0fofUK/NFPA99C of USA as per enclosed technical specification |
| 11 | SITC of Fully automatic oxygen control panel as per HTM -2022/02-01 of UK/ Nepa99C of USA as per Technical specification |
| 12 | SITC of Oxygen Manifold with 8Nos. Pig tail pipes for 4 plus 4 cylinders and non return valves as Technical specification (Indian) without cylinders |
| 13 | SITC of Vacuum Outlets with matching probes, as per HTM-2022/02-01 of UK/NFPA99 C of USA as per enclosed technical specification |
| 14 | SITC of Ward Vacuum Unit CE Certified/UL Listed with suction Jar (capacity 1/2 Gallon) and Low suction regulator for critical area |
| 15 | Ducting for AHU |
| 16 | SITC of Medical Grade BS EN:13348 Kite Marked Copper Pipe (Indian) 12mm |
| 17 | SITC of Medical Grade BS EN:13348 Kite Marked Copper Pipe (Indian) 15mm |
| 18 | SITC of Medical Grade BS EN:13348 Kite Marked Copper Pipe (Indian) 22mm |
| 19 | SITC of Medical Grade BS EN:13348 Kite Marked Copper Pipe (Indian) 42mm |
| 20 | Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections. 16 Sq. mm 4 Core Ard. Cable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
