Tender For Provision Of Store Shed For Bso Yard Under Ge Dehradun, dehradun-Uttarakhand

Tender For Provision Of Store Shed For Bso Yard Under Ge Dehradun-Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Any Type Of Soil Complete All As Specified And Directed. 2 M&L For Plain Cement Concrete 1:4:8 Type D-2 ( 40 Mm Graded Crushed Stone Aggregate ) In Foundations, Filling And Mass-Concrete Complete All As Specified And Directed. 3 M&L For Anti Termite Treatment With Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Complete All As Specified And As Directed. 4 M&L For Anti Termite Treatment With Treating The Bottom And Sides Of Excavation At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area Complete All As Specified And As Directed. 5 M&L For Anti Termite Treatment With Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall Complete All As Specified And As Directed. 6 M&L For 25 Mm Damp Proof Course In Cm 1:2:4 Type B-0 To Horizontal Or Vertical Surfaces Including Necessary Formwork Complete All As Specified And As Directed. 7 M & L For Use And Waste For Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits ( If Any ) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter For Rough Flat Finished Surfaces Of Concrete Complete All As Specified And Directed. 8 M&L For Reinforced Cement Concrete 1:2:4 Type B1 ( Nominal Mix ) Using ( 20 Mm Graded Crushed Stone Aggregate ) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed. 9 M&L For Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed. 10 M&L For Brickwork With Subclass ‘B’ Bricks, Straight Or Curved On Plan Exc 6M Mean Radius, Built In Cement1:6 Complete All As Specified And Directed. 11 M & L For Returning, Filling In Incl Spreading, Levelling, Watering And Well Ramming In Layers N.Exc 25 Cm Complete All As Specified And Directed . 12 M & L For Removing Excavated Soil N. Exc 50 Mtr And Depositing Where Directed At A Level N.Exc 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. 13 M & L For Rendering 15Mm Thick In Cement Mortar 1:6 Finished On Fair Faces Of Brick Work Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 14 M&L Rendering 15 Mm Thick In Cement Mortar 1:4 On Fair Faces Of Brickwork Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 15 M&L For Preparation Of New Plastered Surfaces And Applying Two Coats Of Cement Base Paint Of Approved Shade On Walls Complete All As Specified And Directed. 16 M&L For Preparation Of Newly Plastered Surface Of Walls Including Corners And Applying Three Coats Of White Wash Finish On Wall Surface Even & Smooth Complete All As Specified And Directed. 17 M&L For Surface Excavation Not Exc. 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Any Type Of Soil, Complete All As Specified And Directed. 18 M&L For Forming Embankments Including Raising ( Or Lowering ) Earth Filling Under Floors Or In Foundations Including Watering And Consolidation Complete All As Specified And Directed. 19 M&L For 75Mm Thick Cement Concrete 1:4:8 Type D2 ( 40Mm Graded Stone Aggregate ) Complete All As Specified And Directed. 20 M&L For 50Mm Thick Cement Concrete In 1:2:4 Type B-1 ( Using 20Mm Graded Aggregate ) Complete All As Specified And Directed. 21 Supply Only 38Mm Wide Sheet Glass Dividing Strips, 3Mm Thick, Inserted In Position, Confirm To Design Complete All As Specified And Directed. Note:- Cost Of Fixing Of Glass Shall Be Inclusive In The Quoted Rate Of Respective Item Of Concrete. 22 M & L For 75Mm Thick Pcc 1:3:6 Type C-1 As In Plinth Protection, Finished Even And Fair Including Joints And Filling Bitumen Sand Mixer ( 1:3 ) Complete All As Specified And Directed. 23 S & F For Steel Work In Tubular Trusses Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I.S.1161-1979 Grade St.-240 Complete All As Specified And Directed. 24 S&F Mild Steel Plates ( Plain Or Chequered ) Channels, Square Cut Or Notched ( Ordinary And Counter Sunk ) Forming Holes, Without Any Attachment Conforming To Fe-410-W ( Gde-E-250 ) Quality-A Complete All As Specified And Directed. 25 S&F 5 To 10 Mm Mild Steel Screw Bolts ( Machine Made ) With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut, Exc 10Cm Long And Nexc 15Cm Complete All As Specified And Directed. 26 M&L For Preparation Of New Steel Surfaces Of Any Description, Over 10Cm In Width Or Grith, Not Otherwise Described And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed. 27 S&F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self-Tapping Screws Complete All As Specified And As Directed. 28 S&F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified And As Directed. 29 S&F For 2Mm Fibre Glass Reinforced Translucent Corrugated Sheeting With Two Corrugations Side Lap Fixed With Coach Screw And Washer In Roof, Wall Etc. Complete All As Specified And Directed. 30 M&L For 20 To 25 Mm Thick Machine Cut Kota Stone Slab Flooringover 15 Mm Thick Screed Base Laid In Cm 1:6 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Complete All As Specified And Directed. 31 M&L For 20 To 25 Mm Thick Machine Cut Kota Stone Slab As In Risers Of Steps, Skirting, Dado And Pillar Including 10 Mm Thick Rendering In Cm 1:4 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Complete All As Specified And Directed. 32 S&F Mild Steel Framed Work Such As Grills, Gratings, Iron Chowkhats Etc., With Ends Of Bars Shouldered And / Or Riveted, Or Forget Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Mild Steel Conforming Tofe 290. Gde-E-165 For Portions Framed And Hung As Gates, Including Pintle Hinges, Stops, Hand-Made Sliding Bolts, Etc. Complete All As Specified And Directed. 33 S&F For 1.25Mm Thick Mild Steel, Plain, Black Sheet In Wall Cladding, Steel Gates And Similar Work, Covering To Door Shutters, Cut To Size, Holes Punched; Including Round Headed Screws, Clout Nails Or Rivets And Fixed To Wood Or Steel Framing With Plain 40 Mm Lap Joints With Riveted Or Welded Seams, Including Bending Or Turning Up, Mitred Angles, Etc. As Required Complete All As Specified And Directed. 34 M&L For Pre-Polished Pavement Coloured Chequred Tiles Glossy Finish Of Size Not Less Than 300 X 300 X 20-22Mm Thick With Anti Skid Properties Laid Over, Set, Jointed And Pointed In Neat Cement Slurry In Floors With Grey Cement And No Pigments And Including 15 Mm Thick Screed Bed In Cm 1:6 Complete All As Specified And As Directed.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	06-May-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	13-05-2023

INR 500 /-

INR 38800.0 /-

INR 19.40 Lakhs /-

Name of Work :PROVN OF STORE SHED FOR BSO YARD UNDER GE DEHRADUN.

Sl. No.	Item Description
1	Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.
2	M&L for plain Cement concrete 1:4:8 Type D-2 (40 mm graded crushed stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed.
3	M&L for Anti termite treatment with treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
4	M&L for Anti termite treatment with Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
5	M&L for Anti termite treatment with Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.
6	M&L for 25 mm Damp proof course in CM 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.
7	M & L for use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat finished surfaces of concrete complete all as specified and directed.
8	M&L for Reinforced cement concrete 1:2:4 type B1 (nominal mix) using (20 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
9	M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
10	M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement1:6 complete all as specified and directed.
11	M & L for returning, filling in incl spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed .
12	M & L for removing excavated soil n. exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.
13	M & L for rendering 15mm thick in cement mortar 1:6 finished on fair faces of brick work even and smooth without using extra cement complete all as specified and directed.
14	M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brickwork even and smooth without using extra cement complete all as specified and directed.
15	M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified and directed.
16	M&L for preparation of newly plastered surface of walls including corners and applying three coats of white wash finish on wall surface even & smooth complete all as specified and directed.
17	M&L for Surface excavation not exc. 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.
18	M&L for forming embankments including raising (or lowering) earth filling under floors or in foundations including watering and consolidation complete all as specified and directed.
19	M&L for 75mm thick cement concrete 1:4:8 type D2 (40mm graded stone aggregate) complete all as specified and directed.
20	M&L for 50mm thick cement concrete in 1:2:4 type B-1 (using 20mm graded aggregate) complete all as specified and directed.
21	Supply only 38mm wide sheet glass dividing strips, 3mm thick, inserted in position, confirm to design complete all as specified and directed. Note:- Cost of fixing of glass shall be inclusive in the quoted rate of respective item of concrete.
22	M & L for 75mm thick PCC 1:3:6 type C-1 as in plinth protection, finished even and fair including joints and filling bitumen sand mixer (1:3) complete all as specified and directed.
23	S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.
24	S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.
25	S&F 5 to 10 mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm long and nexc 15cm complete all as specified and directed.
26	M&L for preparation of new steel Surfaces of any description, over 10cm in width or grith, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
27	S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed.
28	S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
29	S&F for 2mm fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.
30	M&L for 20 to 25 mm thick Machine cut kota stone slab flooringover 15 mm thick screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
31	M&L for 20 to 25 mm thick Machine cut kota stone slab as in risers of steps, skirting, dado and pillar including 10 mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
32	S&F mild steel Framed work such as grills, gratings, Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work mild steel conforming toFe 290. Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified and directed.
33	S&F for 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, covering to door shutters, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
34	M&L for pre-polished pavement coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.