Public Works Department-PWD has published Tender For Construction Art Gallery And Museum At Dharamshala, Distt. Kangra, Hp ( Sh- Providing Fire Alarm And Fire Fighting System Therein ). Submission Date for this Tender is 21-04-2023. Fire Alarm Systems Tenders in dharamshala Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Firem Alarm System |
| 2 | Supply, Installation, Testing and Commissioning ofMicroprocessor based Intelligent Addressable Main Fire Alarm Control Panel with SuitableLoops modules and each loop capable of supporting not less than 250 devices (detectors & modules should be in any combination) ; Loop length up to 1.5 km, 8"Color LCD touch screen display with bright colors to indicate alarms and events, 4 Nos of Integrated Ethernet Ports & 2 Nos of RS 485 for networking,200 Nos of Soft programmable keyswith status indicators for individual triggering of NAC Ouputs, evacuation speaker zones, AHU Modules, Damper switch, Smoke extraction Fans, Lifts.. etc. The Panel shall support 10000 history logs in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger.The panel should also have IP30 or better protection. The panel shall have seamless integration with EVAC certified Public Address System and shall be complete with all accessories . EN54 / Vds/UL Certification Make Autronica/ Notifire / Bosch./Simens- EN |
| 3 | Supply, Installation, Testing and Commissioning of addressable multisensor smoke detector including mounting base with LED… etc. complete as required with 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements; Drift Compensation feature & Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) Make Autronica/ Notifire / Bosch/Simens -EN |
| 4 | Supply, Installation, Testing and Commissioning of addressable Heat detector with fixed and rate of raise feature including mounting base with LED… etc. complete as required. Each Detector should have 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005 .Detector should monitor Electromagnetic interference and report to the panel - current and average values. Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) Make Autronica/ Notifire / Bosch / Simens -EN |
| 5 | Supply, Installation, Testing and Commissioning of addessableSingle ACTION manual pull station & necessary fixing arrangements with key complete as required. MCP should have IP40 or better protection rating Shall be UL/EN/VDS Certified.Make Autronica/ Notifire / Bosch/Simens -EN |
| 6 | Supply, Installation, Testing and Commissioning of Sounder cum strobes with 3 different tone variants selection options & adjustable sound pressure by 3 levels, the sound pressure 92 dB(A),Sounder should have IP40 or better protection rating. with flasher having Synchronized flash rate of 1 Hz and Light intensity15cd-185cd. Shall be UL/EN/VDS Certified.Make Autronica/ Notifire / Bosch/Simens -EN |
| 7 | Supply, Installation, Testing and Commissioning of Addressable Monitor Module with 1 input, which shall monitor normally open or normally closed contacts.The module shall have an LED to indicate module status.It Shall be UL/EN/VDS Certified. Make Autronica/ Notifire / Bosch/Simens -EN |
| 8 | Supply, Installation, Testing and Commissioning of Addressable Control Relay Module with inbuilt isolators as per NFPA 72 style 7 wiring requirements .Relay Control module shall be used for emergency control functions including shutting down Fire dampers in AHU"s, tripping of AHU"s,Fresh air fans, Ventilation fans, tripping of Access control doorsetc.. Shall beEN54/ Vds Certification/UL Make Autronica/ Notifire / Bosch/Simens -EN |
| 9 | Supply, Installation, Testing and Commissioning of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class – 1 material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour & material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work MakePES/Giolite/OMEX |
| 10 | Supply, Installation, Testing and comissioning of 2 core multistrand 1.5 sq mm annealed copper conductor speaker cable in existing pipe/ channel I/C connection etc.Make Finolex/Polycab/havel"s |
| 11 | Supply and erection of 25 mm dia PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. Make Diplast/Polyplast/PolyFit |
| 12 | Supply Installation Testing and comissioning of 18U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications,complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make:- Valrack /Netrack/ Comrack |
| 13 | Supply, Installation, Testing and comissioning of 2 KVA UPS cum Inverter with 1 hour Backup. Make:- LIBERT EINOVA / Luminous/APC |
| 14 | Fire Fighting System |
| 15 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 200 mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required in all respect and to the best satisfaction of Engineer-in-Charge. |
| 16 | Providing, laying, jointing, testing and commissioning of following sizes of MS "C" Class (Heavy duty) pipes conforming to IS-1239 with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be ofiron unless specified otherwire and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.Priorto application of primer the surface should be cleaned dirt,rusts,rough substance etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 17 | 25mm dia pipe |
| 18 | 80mmdia pipe |
| 19 | 100mm dia pipe |
| 20 | Makes:- Jindal/TATA. |
| 21 | Providing two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting oflegends both direction arrow as per the approval of the Project Manager as required complete in all respects and to the best satisfaction of Engineer-in-charge.Makes:- Jindal/TATA. |
| 22 | 25mm dia pipe |
| 23 | 80mmdia pipe |
| 24 | 100mm dia pipe |
| 25 | Providing & fixing ofburden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 26 | Make:- H Guru, Bell, Fiebig |
| 27 | Providing & fixing Gun Metal fire hydrant single headed landing valve with 80 mm N.B.flangedinlet, s.s spindle controlled 63 mm dia femaleinstantaneousoutlet type. SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS standards as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 28 | Make Minimax /Padmini/Omex/AAAG India |
| 29 | Providing & fixing of63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with Gun Metal male & female instantaneous type coupling (IS 903) (For internal and External hydrant system) as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 30 | Make Minimax /Padmini/Omex/AAAG India |
| 31 | Providing and fixing Gun Metal 63 mm dia instantaneous pattern branchshort pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 32 | Make Minimax /Padmini/Omex/AAAG India |
| 33 | Providing & fixing ball valve 25mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 34 | Make Sant/leader/Audico |
| 35 | Providing & fixing ofwall mounting swinging type first aid fire hose reel with drum, hanging bracket, 30 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with S.S. shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Rate shall include 25 mm dia M.S. pipe connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wallthrough anchor fasteners / cement concrete block as and when required complete in all respects and to the best satisfaction of Engineer-in-charge.. |
| 36 | Make Minimax /Padmini/Omex/AAAG India |
| 37 | Weather proof standard fire hose cabinet made of 18 SWG powder coated fibre. sheet having single or double opening glazed (3.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 38 | Make Minimax /Padmini/Omex/AAAG India |
| 39 | Providing& fixing Gunmetal Collecting headinlet connection to external hydrant ring/hydrant riser with 4 Nos. 63 mm dia instantaneous type inlet and 150 mm dia flanges outlet conforming to IS:904 with blank cap and chain. |
| 40 | Make Minimax /Padmini/Omex/AAAG India |
| 41 | Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt, nuts, gasket etc. As per table "E"specificationcomplete in all respect hydraulically test to 20 K./sqcm. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 42 | 80 mm dia |
| 43 | 100 mm dia |
| 44 | Make Minimax /Padmini/Omex/AAAG India |
| 45 | Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with S.S. seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 46 | 100 mm dia |
| 47 | Make Minimax /Padmini/Omex/AAAG India |
| 48 | Providing & fixing of Bitumein sheet 4mm thick (pipekot) wraping & coating with Excavation for underground pipe 100mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 49 | Make Shalimar/WTL |
| 50 | Supply, installation,testing and commissioningofelectricallyfire pump,suitablefor automatic operationconsisting of the following: |
| 51 | Electrical Motor Driven Automatic pressurisationpumping set consisting of the following as per specification Horizontally mounted centrifugal type single/-stage fire pump for building pressure loss due to any leakage in the system and capable to deliver approx 450 LPM against atotal head of 45 M heaving cast iron body.bronze impeller,stainless steel shaftbonze impeller an SS shaft,sleev with gland packed arrangement coupled on common base plate .Pump in back pull out design having 65mm suction, 40 mm delivey. b)Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts +10%-10% 3 phase 50HZ AC supply of suitable capacity(appro. 7.5KW)10 HP for the above pump with synchronous speed of 1500/3000 RPM confirming to IS325 &duly coupled with above pump coupled with flexible coupling including earthing as per relevant Indian Standard and specification.c) Common bed plate for mounting pump and Motor fabricated of suitable MS channel as per manufactures recommendation.d)Suitable RCC pump foundation as per manufactures design Dunlop 4 Nos Dunlop Anti-vibration( cushy foot) heavy duty mounting pads. |
| 52 | Make:- Kirloskar/ Siemens / Groundfoss. |
| 53 | Supply, installation, testing and commissioning of Pressure switch for fire pumps of approved make,including necessary wiring and cut off valve up to central panel & other material as described in specifications. |
| 54 | Make:- Indfoss /System Sensor/Denfoss |
| 55 | SITC of electrical main conrol panel made 16 gauge sheet with power coating consisting of following items.1No. Voltmeter with selector switch 1Nos Ampere meter with selector switch 1No sets of current transformer MCCB 100 Amp-1No MCCB 63 Amp 1No Automatic starter,15 HP motorHooter DC control relay r 3 set of the start stop switch 3Nos.indicating lamps Automanul switchset, interlocking kit/terminal charging rate selector switch of trickle/boost. |
| 56 | Makes:- Advance/Delight Power Control |
| 57 | Providing and laying of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts grade of following sizes on wall surface as required. Make:- SCI/ KEI/Havells. |
| 58 | Armoured cable 10 sq. mm (4 core) |
| 59 | Armoured cable 25 sq. mm (3.5 core) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
