|
| 1 | Finishing Works |
| 2 | Providing & applying two or more coats of Epoxy anticorrosive primer 100 micronsof approved make likeSigmaCover 280 or equivalent on theexhibit boat for portions such as superstructure, equipments, handrails, mast,Deck area,Boot topping etc.Rates areincluding preparation andcleaning of surface, thinners,scaffoldingetc. complete as per the direction of engineer in charge. |
| 3 | Providing & applying 2 or more coats of acrylic polyurethanecoatingglossy finish of SigmaDur Gloss Grey 7040 or interthene 990 or equivalent and of approved colour by the architectfor ship exhibit for portions such assuperstructure, equipments, Handrails, mast, boot topping etc .Rates are including thinners ,scaffolding etc complete as per the direction of engineer in charge. |
| 4 | Providing & applying non skid epoxy paint 2 or more coats on deck area of approved make like Advoguard Non-Skid DA Grey or equivalent and approved colour as per the direction of engineer in charge including thinners ,scaffolding etc complete. |
| 5 | Steel work |
| 6 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 7 | Supply and fixing of Nylon wire rope for ship exhibit |
| 8 | Electrical |
| 9 | 15.4.2 : Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On &OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete ad required2 output per phase and suitable for single phase supply. |
| 10 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 11 | 2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole |
| 12 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 13 | 2.10.5 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral |
| 14 | 2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 15 | Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date with factory made clamp: Size: 4 x 6 Sq.mm |
| 16 | Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date with factory made clamp2 x 6 sq.mm |
| 17 | 9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm) |
| 18 | 9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm) |
| 19 | SITC of exterior RGB architectural LED linear grazing light with housing material of Die-cast aluminum with dark grey anodized finish, system wattage should be less than or equal to 50W at full load and system lumen output of not less than 1600 lumens. Fixture shall be available with architectural optics with choice of beam angles of Elliptical 25° x 40°. The luminaries shall be with PMMA lens with suitable A4 optics for better illumination. Fixture dimension shall be not larger than 1000 x 45 x 55 mm with bracket and weight not more than 3.5kgs. Fixture shall have input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total IP66 & IK06 protection.
Make : Philips BCP383 24LED RGBNW 220V A4 L100 DMX or equivalent in approved make |
| 20 | Installation , Programming, Testing and Commissioning of the entire system |
| 21 | Supply and installation of third party accessories like IP65 syntax box, Junction box, external 10 kV SPD,Cat 6 cable, Power cable from distribution box, MCB reqd as per site near to the installation |
| 22 | Supply Installation Testing and Commissioning of DMX controller with 8 port Make : Philips ZXP399 DMX controller 12V 8port or equivalent in approved make |
| 23 | Supply and installation of IP67 end caps |
| 24 | SITC of 4 pole leader cable to connect from DMX to the first luminare
Make: Philips ZXP399 Lead 4P DMX cable 2m or equivalent in approved make |
| 25 | Supply of 4 pole Jumper cable to connect from luminaire to another luminare
Make : Philips ZXP399 Jump 4P DMX cable 2m or equivalent or approved make |
