Tender For Providing And Fixing Of Open Gym Equipments At Kalindi College Premises In Patel Nagar Assembly Constituency 24, Delhi-Delhi

Providing And Fixing Of Open Gym Equipments At Kalindi College Premises In Patel Nagar Assembly Constituency 24--- 1 Providing And Fixing Of Air Walker / Health Walker. Health Walker Of Size 1070X 615X1509mm Fabricated With Main Post Of 114Mm “C” Class G.I. Pipe Made Of Hot Roller Tubular Steel And Hot Dipped Galvanized And Powder Welded Coated Using Akzo Nobel Of 60-80 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Are Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Of Nylon Alloy With Rounded Edges To Prevent Any Impact Of Injury And Base Plate Cover To Be Made From Virgin Llpde Manufactured By Rotational Moulding With Minimum Thickness Of Plastic Of 8Mm Colourful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Made Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-Incharge. Equipment To Be Fitted With In Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Are Applied At All Welded Points Prior To Finishing. All Complete As Per The Technical Specifications To Manufacture The Item. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 2 Providing And Installation Of Surf Board / Air Swing. Surf Board In Pair Of Size 1150 X 900 X 1250Mm Fabricated With Main Post Of 114Mm Dia And “C” Class G.I. Pipe As Per Is-1239 Andrest Of The Pipe 40Mm Dia“C” Class G.I. Pipe As Per Is-1239 And Powder Coated Using Akzo Nobel Or Equivalent Of 60-80 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Of Nylon Alloy With Rounded Edges To Prevent Any Impact Of Injury And Base Plate Cover To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic Of 8Mm Colorful And Uv Resistant And Environmental Friendly Or Frp Material Of Same Specification, Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Closed By Gi / Lldpe / Frp Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete After Deep Excavation Work Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate. All Complete As Per The Technical Specifications Tomanufacture The Item.Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 3 Providing And Fixing Of Shoulder Twirl Double / Big Shoulder Wheel. Big Shoulder Wheel Seated Chest Press Of Size 857X850x1815mm Fabricated With Main Post Of 114Mm And “C” Class G.I. Pipe Made Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nodel Of 60-80Mm Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Are Applied At All Welding Points Prior To Finishing. All Complete As Per The Technical Specifications To Manufacture The Item. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 4 Providing And Fixing Of Hand Rower / Rower Machine. The Main Frame Of Hand Rower Size: 1475X860-80X1065mm With Main Post Of 114Mm Dia And 4 Mm Thick “C” Class G.I. Pipe And Frp ( Fiber Reinforced Plastic Seat With Backrest Is Fixed Over 40Nb Galvanized Bend Pipe. This Bend Pipe Is Further Linked To 114Nb Base Pipe &, With Help Of Connecting Links. Connecting Links Are Made Up Of 25Nb G.I. Pipes With Specially Designed Metal Bush At Ends. The Paired 25Nb Pipe Handle With Rubber Grip At The End Is Fixed Over One Of The Connecting Link. The Rolling Frame Is Made By 40 Nb & 20 Nb G.I. Pipes. Connecting Links Are Hinged In Between Seat Frame And Base Frame With Specially Designed Bush Bearings. A Suitable Pvc / Rubber Grip Is Provided Forthe Pipe Ring. The G.I. Pipe To Be Used Of Standard Make And C-Class . Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 5 Providing And Fixing Of Knee Back Stretch / Leg Stretch Of Size1200x550x900mm Fabricated With Main Post Of 114Mm And 4.00Mm Thick “C” Class G.I. Pipe Made Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Of 80-120Mm Micron Thick, Frp / Hdpe / Lldpe ( Fiber Reinforced Plastic / High Density Poly Ethylene / Linear Low Density Poly Ethylene ) Seat With Backrest Is Fixed Over 40Nb Galvanized Bend Pipe. This Bend Pipe Is Further Attached To 114Nb Main Supporting Pipe. The Paired 25Nb Pipe Handle With Rubber Grip At The End Is Fixed Over 40Nb Pipe Frame. The Rolling Frame Is Made By 40 Nb & 20 Nb G.I. Pipes.Rolling Frame Is Hinged At The One End Of 40 Nb Bend Pipe Frame With Specially Designed Bush Bearing. A Suitable Pvc / Rubber Grip Is Provided For Foot Rest On Rolling Frame. All Pipes Are Uniformly Powder Coated Up To Minimum 60-80 Micron Thickness To Avoid Corrosion. All Open Ends Of Pipe Been Closedby Gi / Hdpe Caps For User Safety Against Entrapment. Handle For Rotating The Ring Fixed Over The Pipe Ring. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Each 46000 / -Excavation In Earth At Site 6 Providing And Fixing Of Hip Twister Double / Waist Twister. The Waist Twister Of Size Size1840x1840x2000mm Fabricated With Main Post Of 114Mm “C” Class G. I. Pipe Made Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nodel Of 60-80Mm Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Are Applied At All Welding Points Prior To Finishing. Rotating And Base Plate Cover To Be Made From Virgin Llpde Manufactured By Rotational Moulding With Minimum Thickness Of Plastic Of 8Mm Colourful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Made Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted With Inbuilt Limiter To Prevent Unwanted Movement. All Complete As Per The Technical Specifications To Manufacture The Item. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 7 Providing & Fixing Of Dualsky Walker / Double Cross Walker. Double Cross Walker Of Size 160- 800 X 60-800 X 160-800 Mm Fabricated With Main Post Of 114Mm Dia And “C” Class G.I. Pipe As Per Is1239 And Rest Of The Pipe 40Mm Dia “C” Class G.I. Pipe As Per Is-1239 And Powder Coated Using Akzo Nobel Or Equivalent Of 60-80 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Each 83000 / - Rotational Moulding With Minimum Thickness Of Plastic As 8Mm Colorful And Uv Resistant And Environmental Friendly Or Frp Material Of Same Specification, Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe / Frp Caps For User Safety. Theequipment To Be Fixed On Ground With Concrete After Deep Excavation Work Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover With The Base Plate. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	19-04-2023	CORRIGENDUM	Date	27-04-2023
2	26-04-2023	CORRIGENDUM Performance guarantee	Other	27-04-2023

Refer document

INR 8688.0 /-

INR 4.34 Lakhs /-