Himachal Pradesh State Industrial Development Corporation Limited-HPSIDC has published Tender For Construction Of Block Elementary Education Office Building At Kuthar Teh. Kasauli Distt. Solan (Hp).. Submission Date for this Tender is 19-04-2023. Building Work Tenders in kasauli Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed upto all leads and lifts. |
| 2 | Providing & laying cement concrete 1:510 (1cement: 5sand: 10graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 3 | Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shutteringstrutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:- (a) Foundation footing bases of columns etc. and mass concrete. |
| 4 | b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain. |
| 5 | (c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth. |
| 6 | (d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness. |
| 7 | (e) stair cases with slopping or stopped soffits exclding landing |
| 8 | (f) vertical surface sch as wall any thickness partition plaster and string course and like |
| 9 | e) Edges of slabs and breaks in floors and walls : under 20cm wide. |
| 10 | Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 greaded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work : a)foundetion footing basis of colums etc |
| 11 | b) Columns, pillars, posts and struts upto floor two level. |
| 12 | c) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level. |
| 13 | d) stair cases ( except spiral) stair cases excluding landing but i/c preparing of the surface and finished of nosingup to floor two level |
| 14 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level. |
| 15 | Brick work using common burnt clay building bricks in foundation & plinth incement mortor 1:6 (1cement :6sand).in Ist class bricks. |
| 16 | Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1cement : 2sand: 4 stone aggregate 12.5 mm nominal size) andcuring complete. |
| 17 | Applying a coatof hot bitumen ( mexfhalt 80 / 100 or equivalent ) using 1.70 kg. per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. |
| 18 | Providing & laying PVC sheet. 200 micron. |
| 19 | Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 2nd class bricks upto all hight. |
| 20 | Half brick work with common brunt clay building bricks in super structure in cement mortar 1:4 ( 1 cement :4 sand 0 1st class brick |
| 21 | Providing and fixing pressed steel doors frames manufactured fromcommercial mild steel sheet of 1.25mm thickness including hingesjamb lock, beed and if required angle thrashold of mild steel angle ofsection 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with spilt & tails to each jamb including steel but thinges 2.5mm and shock absorber as specified and applying a coat of approved steel primer after pretreat- ment of the surface as directed by Engineer in-charge.a) Profile-C. |
| 22 | Providing and fixingpanelled glazed shutter for door window and clear story window for door windows and clearstory windows with necessary screws 40 mm thick second class deodar wood |
| 23 | Providing and fixingwire guage shuter using galvanised m.S> wire guage of I.S. guage designation 85G with wire of dia 0.56mm for door windows and clearstory windows with necessary screws 30 mm thick second class deodar wood |
| 24 | Providing and fixing anodized aluminium sliding door bolt anodized colour & shade with bolt and nuts screws etc. complete. 300 x 16mm. |
| 25 | Providing and fixing aluminium tower bolt (berrel type) anodized transparant or dyed to required shade and colour with screws etc. complete. (a) 150 x 10mm size. |
| 26 | b) 100 x 10mm size. |
| 27 | Providing and fixing aluminium handles anodized transparant or dyed to reqd. colour and shade with necessary screws etc. complete. (a) 125mm nominal size. |
| 28 | Providing & fixing bright finished hard drawn hooks and eyes. 250mm. |
| 29 | P/F 100mm bright finished brass door stopper with rubber cushion screw etc. to suit shutter thickness. |
| 30 | Providing & fixing hydraulic door spring of approved brand and manufacturefor door complete as per direction of Engineer-in-charge. |
| 31 | 6mm cement pilaster to ceiling in cement mortar 1:4 ( 1 cement 4 sand) |
| 32 | 15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 33 | 15mm cement plaster in singale coat on the rough of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 34 | Appling birla white wall care putty over plaster surface after thoroughly brushing the surfacefree from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete. |
| 35 | Applying one coat of Acrylic primer (spectrum or equivalent of superiorquality) on new concrete/maasonry/ plastred surfaces after & i/c preparingthe surface by thoroughly brushing the surface free from mortor droppings & other foreign matters, sand papering the surface smooth complete. |
| 36 | Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. |
| 37 | Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. |
| 38 | Providing and fixing MS Grills of required pattern and standard design. |
| 39 | White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement: 3sand) & finished with flush pointing in white cement. White glazed tiles in treads of steps not exceeding 30cm in width. |
| 40 | Providing and fixing 10mm thick antiskid waterproof stain and impact resistant heavy dutyvitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 41 | Prov.and laying spartic ceremic tiles 5.5 mm thick in flooring (300 X 300 mm.size) treads of steps laid on a bed of 12 mm thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement. |
| 42 | Kota stone slab flooring 20mm (average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 25mm thick. |
| 43 | Kota stone slab 25mm thick in rIser of steps, skiting dado and pillars lain on 12mm (average) thick cement mortar 1:3(1cement :3sand) and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and polishing complete. |
| 44 | Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long. |
| 45 | Conustructing course rubble hammer dressed U shape open surface drain with side wall 15x 22cm in cement mortar 1:6 (1cement:6sand)and inside plastering with cement plaster 1:3 including earth and laying 10cm concrete in 1:5:10 of 40mm nominal size and 7.5cm cement concrete 1:2:4 of 20mm nominal size and finished with a floating coat of neat cement as per standard desig |
| 46 | Applying primingcoat (excluding priming coat) on wood and other woodensurface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white. |
| 47 | Painting two coat (excluding priming coat) on wood and other woodensurface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white. |
| 48 | Steel work welded with built up sections, trusses and framed workincluding cutting hoisting, fixing in position & applying a priming coatof red lead paint. (a) In grating framed guard bars, ladders railing, brackets &similar work. |
| 49 | Appling priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knottingReady mixed pain brushing red oxide/zink oxide chrome. |
| 50 | Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white. |
| 51 | P/L PVC pipe for rain water pipe complete with adhasive 110mm dia |
| 52 | P/L PVC pipe for rain water pipe complete with adhasive 110mm dia accesseries bend |
| 53 | P/F PVc clamps for rain water pipe 110mm dia |
| 54 | Providing and fixing flush door shutters interior grade, commercial type, coreof black-board construction with frame of first class hard wood well matchedcommercial ply veneering with vertical grains of cross bands and face veners on both face of shutters. 25 mm thick including nickel plated bright finished M.S. piano hinges. |
| 55 | Providing & fixing 1.00 mm thick coloured or plain lamination sheet (sunmica)on boards/ ply wood sheets with approved adhesive and nails etc. complete. |
| 56 | Providing & fixing 65 x 35 mm special quality bright finished brass cupboard locks or ward robe locks with six lebers including necessary screws etc. complete |
| 57 | Providing and fixing bright finished brass ball magnet catcher |
| 58 | Providing and fixing bright finished brass handles with screws etc. Complete.(a) 125mm |
| 59 | Providing & fixing particle board lining with butt jointing and nails (frame workand cover fillets to be measured and paid for separately) 25mm thick. |
| 60 | Providing and fixing wall , ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling andfloors. (a) 15mm nominal bore.minium weight 1.22kg. Per running mtr. Jindal/ Tata. |
| 61 | (b) 20mm nominal bore.minium weight 1.57kg. Per running mtr. Jindal/ Tata. |
| 62 | Providing and laying in trenches galvanized mild steel tubes (medium grade) tube fitting (earth work in trenches to be measured and paid for separately). (a) 15mm nominal bore. Minimum weight 1.22kg. Per running mtr. Jindal/Tata. |
| 63 | Providing & fixing high pressure PVC spigot and socket, waste and ventilatingpipes ISI marked including fixing with approved adhesive etc. complete. (a) 110mm dia. |
| 64 | (b) 150mm dia. |
| 65 | Providing and fixing PVC Plain bend ISI marked including fixing with approvedadhesive etc. complete. (a) 110mm dia |
| 66 | Providing and fixing PVC Door with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. (a) 110mm dia |
| 67 | Providing and fixing Double equal branch of required degree with oval accessdoor insertion rubber washers 3mm thick bold and nuts complete. (a) 110mm dia |
| 68 | Providing and fixing PVC floor trap of self cleaning design with sand castiron screwed down or hinged grating with or without vent arm complete I/c cost of cutting and making good the walls and floors. 110mm x 90mm. |
| 69 | Providing and fixing vitreous china wash down water closet (European type W.C.pan) with integral P or S trap including jointing the trap with soil pipes in cement mortar 1:1 (1cement :1sand) (seat and cover to be measured andpaid for separately). Anglo Indian (Universal Closet) confirming to IS code 2556 Part-I and part-Iionly Hindware/ Cera / Parryware. |
| 70 | Providing and fixing PTMT Coloured/ white high density polyethylene/ poly propylene 10 ltrs. Capacity (full flush) European atandard control lowlevel flushing cistern with fittings with a pair of brackets with fitting such as lead valve, syphon, 15mm nomonal size PVC ball valve with polythenefloat, with push button, coiplings for connection with inlet, outlet and overflow pipe, 40 mm dia CP flish bend i/c cutting holes in walls and makinggood the same and connecting the flish bend with cistern and closet(overflow pipe to be measured and paid for separately. |
| 71 | Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I or M.S. brackets painted white including cutting holes and makinggood the same but excluding fittings. Flat Back 630mm x 450mm. |
| 72 | Proving & fixing plastic seat and cover for wash down water closet with C.P. Brass hinges and rubber buffers.a) white plastic seat and cover |
| 73 | Providing and fixing C.P.Brass waste for wash basin or sink. 32mm dia. |
| 74 | Providing and fixing stainless steel kitchen sink of approved standard ISI makewith drain board and CP waste with CI or MS brackets painted white includingcutting holes and making good the same but excluding fitting. 610 x 510 mm with bowl depth 200 mm. |
| 75 | Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers of standard quality. |
| 76 | Providing and fixing C.P.Brass Towell rail complete with C.P.Brassbrackets fixed to wooden plugs with C.P.brass. 600mm x 20mm. |
| 77 | Providing & fixing toilet paper holder. C.P. Brass. |
| 78 | Providing and fixing 600mm x 120mm glass shelf with C.P. brass brackets andguard rail complete fixed to wooden plugs with C.P Brass screws. |
| 79 | P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws. |
| 80 | Providing and fixing brass stop cock. 15mm dia. |
| 81 | Providing and fixing C.P.brass Pillar tap with capaston head. 15mm dia. |
| 82 | Providing and fixing C.P.Brass bit tap with capstan head. 15mm dia, |
| 83 | Providing and fixing P.V.C. Connection pipe with brass unions. 45cm length. 15mm nominal bore. |
| 84 | Providing and fixing M.I. unions for wash basin or sink. 32mm dia. |
| 85 | Providing and fixing brass full way valve with wheel. (a) 20mm nominal size. |
| 86 | a) 15mm nominal size. |
| 87 | Providing & fixing 100mm sand cast iron grating for gully, floor or nahni trap. |
| 88 | providing and fixing PVC cowl. 100mm nominal size. |
| 89 | Providing and fixing jet for W.C. seat complete in all respects. |
| 90 | Providing and fixing P.V.C.water storage tank of ISI: 12701 marked G.I. inlet and outlet connections 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangements including hoisting upto al;l heights above ground level.(a) 1000 litres net capacity tank. |
| 91 | Providing & laying granite stone in flooring 20mm(average) thickness base of ement mortar 1:3 (1cement :3 sand) laid over and joined with grey cementslurry mixed with pigment to match the shade ofgranite stone i/c rubbing and polishing complete. 20mm thick. |
| 92 | SEPTIC TANK: Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not mkore than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed. |
| 93 | Providing & laying cement concrete 1:510 (1cement: 5sand: 10graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 94 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shutteringstrutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:- (A) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth. |
| 95 | (B) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness. |
| 96 | Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 greaded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work. (A) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level. |
| 97 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level. |
| 98 | Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 2nd class bricks upto all hight. |
| 99 | 15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 100 | Providing and laying cement concrete flooring 1:2:4(1cement:2sand:4graded stone agregate laid in one layer finished with floating coat of neat cement 50mm thick |
| 101 | Constructing manhole with R.C.C. top slab in 1:2:4 (1cement:2sand:4grade stone aggregate 20mm nominal size) foundation concrete 1:4;8 (1cement: 4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand)finished with floating coat of neatcement and making channels ion cement concrete 1:2:4 (1cement :2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete I/c curing complete and testing. (a)Inside size 800x800mm and 500mm. Deep including R.C.C. cover and framemedium duty 455mmX610mm internal dia with 200mm thick walls of brickmasonry using common burnt clay building bricks in cement mortar 1:3 (1cement :3sand).complete. |
| 102 | Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous Chinaincluding carriage of material within all leads and lifts. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
