Regarding Running Tender For New Connection On Jhatpat Portalfull Deposit Work Scheme And Sansad Nidhi / Vidhayak Nidhi Depositwork In The Area Of Edsd-Ii, Sardhana Dehatunder Edd-Ii, Meerut, Under Edc-2 Meerut., Meerut-Uttar Pradesh

Regarding Running Tender For New Connection On Jhatpat Portalfull Deposit Work Scheme And Sansad Nidhi / Vidhayak Nidhi Depositwork In The Area Of Edsd-Ii, Sardhana Dehatunder Edd-Ii, Meerut, Under Edc-2 Meerut.- 1 Cartage Of Following Material From Store Center Meerut To Je Store Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :– 2 A ) Pcc Pole 8.5 Mrt Long / St Pole 11 Mtr Long. 3 Cartage Of Line Material From Store Centre To Dump Site & Then Dump Site To Site Of Work On Day To Day Basis, Including Loading & Unloading At Both Ends Maximum Distance Up To 20 Km. ( 15 Qtl. ) 4 Cartage Of 10 Kva To 100 Kva Transformer From Store Centre To Site Of Work Including Loading & Unloading At Both Site 5 Cartage Of Following Material From Je Store To Site Of Work Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :– A ) Pcc Pole 8.5 Mrt Long / St Pole 11 Mtr Long. 6 Dissmentling Of Damaged & Broken P.C.C. / S.T.Pole / R.S. Joist By Digging The Pits & Removel Of Complete H.T. / L.T. Line Accessories . 7 Eartingh Of Each 11 Kv Line Pople & T / F Properly After Drive Of Electrodes If Size 20Mmx250mm And Connection The Earthing Point With Gl Wire. 8 Erection Ofpcc Pole 8.5 Mtr Long / Stp Pole 11 Mrt Long After Digging A Pit Of Size 1.20 X 0.60 X 1.6 Mtr In All Type Of Soil Including Back Filling Of The Pole With Proper Ramming After Completion Of Work. 9 Fabrication And Fixing Of All 11 Kv H.T / L.T. Line Accessories. 10 Erection Of Double Pole On Pcc Pole 8.5 Mtr After Digging Of Pit Of Required Size Including Fabrication And Fixing Of Top Channel, Droper Channel & Base Channel Alongwith, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators And Making Connection Properly. 11 Mounting Of 10 To 100 Kva T / F With Proper Jumping Of Ht Side And Fixing Of Cable On Lt. Side Of T / F Making Connection Properly. 12 Making A Section Pole To Exist Pole After Fabrication & Fixing Of T Channel Fixing Of All 11 Kv Accessories. 13 Erection Of Stay Rod Complete After Digging A Pit Of Size 1.20 X 0.60 X 1.6 Mtr And Grouting The Same In Block Of Size 0.60 X 0.60 X 0.30 Mtr And Nuzzling At The Both Ends And Filling The Pit With Excavated Earth Soil With Proper Ramming. 14 Laying Lifting Stringing Of Proper Sagging Of Acsr Weasel Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 15 Laying Lifting Stringing Of Proper Sagging Of Acsr Rabbit Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 16 Laying Lifting & Sagging Of Lt Line With A.B.C Bunch Conductor Including Proper Binding & Jumpring:-A ) 3 Phase 4 Wire Line. 17 Grouting Of Pcc / St Poles With Dust, Cement & Stone Blast Concreting. 18 Cutting & Chopping Tree Branches Near Side Of Line For Making The Clearance Between Line And Tree ( Near About 100 Branches ) . 19 Fixing Of Lt Distribution Box Along With Providing Clamp Nut & Bolts 20 Providing And Fixing Stay Clamps . 21 Providing And Fixing F Clamp 22 Providing And Fixing Holding Clamp 23 Providing And Fixing Lt Clamps . 24 Providing And Fixing Ltinsulator Clamps . 25 Providing And Fixing Bolt And Nuts .

INR 1180 /-

INR 2000.0 /-

INR 2 Lakhs /-

Name of Work: REGARDING RUNNING TENDER FORNEW CONNECTION ON JHATPAT PORTALFULL DEPOSIT WORK SCHEME AND SANSAD NIDHI/VIDHAYAK NIDHI DEPOSITWORK IN THE AREA OF EDSD-II, SARDHANA DEHATUNDER EDD-II, MEERUT, UNDER EDC-2 MEERUT.

Sl. No.	Item Description
1	Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :–
2	A) PCC Pole 8.5 mrt long/ST pole 11 mtr long.
3	Cartage of line material from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 20 Km. (15 Qtl.)
4	Cartage of 10 KVA to 100 KVA Transformer from store centre to site of work including loading & unloading at both site
5	Cartage of following material from JE Store to site of work including loading & unloading at both ends maximum distance up to 40 Km. :– A) PCC Pole 8.5 mrt long/ST pole 11 mtr long.
6	Dissmentling of Damaged & Broken P.C.C./ S.T.Pole/R.S. Joist by digging the pits & removel of complete H.T./L.T. line accessories .
7	Eartingh of each 11 KV line pople & T/F properly after drive of electrodes if size 20mmx250mm and connection the earthing point with GL wire.
8	Erection ofPCC pole 8.5 mtr long/STP Pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work.
9	Fabrication and fixing of all 11 KV H.T/L.T. line accessories.
10	Erection of Double pole on PCC pole 8.5 mtr after digging of pit of required size including fabrication and fixing of Top channel, droper channel & base channel alongwith, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators and making connection properly.
11	Mounting of 10 to 100 KVA T/F with proper jumping of HT side and fixing of cable on LT. side of T/F making connection properly.
12	Making a section pole to exist pole after fabrication & fixing of T channel fixing of all 11 KV accessories.
13	Erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.
14	Laying lifting stringing of proper sagging of ACSR weasel conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.
15	Laying lifting stringing of proper sagging of ACSR Rabbit conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.
16	Laying lifting & sagging of LT line with A.B.C Bunch Conductor including proper binding & jumpring:- a)3 phase 4 wire line.
17	Grouting of PCC/ST poles with Dust, Cement & Stone blast concreting.
18	Cutting & chopping tree branches near side of line for making the clearance between line and tree (near about 100 branches).
19	Fixing of LT distribution box along with providing clamp Nut & Bolts
20	Providing and fixing stay clamps .
21	Providing and fixing F Clamp
22	Providing and fixing Holding Clamp
23	Providing and fixing LT clamps .
24	Providing and fixing LTInsulator clamps .
25	Providing and fixing Bolt and Nuts .