New Okhla Industrial Development Authority-NOIDA has published Tender For Maintenance Of Village (Renovation And Painting Work And C/O Kitchen At Sadarpur Community Center Old Building) Noida.. Submission Date for this Tender is 24-04-2023. Building Work Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by machanical means (Hydraulic excavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. The contrator has to detect different utilities like sewer line, water supply line, Electric cable, Telephone cable, Gas pipe line etc. using utility detecting machine before start of excavation and shallstart excavation only after getting permission of Engineer-in-charge. |
| 2 | Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of girth upto 30 cms. Measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50m out side the periphery of area cleared. SOR I.NO. 4.06/ 259 (I) |
| 3 | Concrete With 4cm. gauge brick ballast, Fine sand of 1.25 F,M. and cement in proportion of 12:6:1 in foundation andunder floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work SOR I.NO. 5.04/ 275 As in item 273 above but in proportion 8:4:1 |
| 4 | 303 M-150 Brick work in 1.6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. 6.1.1 PWD) SOR-2020 305 (a) Same as item no. 305 but in 1:4 one cement & four coarse sand of2.20 FM. mortar. (6.1.4 PWD) SOR-2020 |
| 5 | 361 As in items 360 above but 2.5 cm thick and of cement concrete consisting of 1 part cement, 1.5 parts approved coarse sand and 3 parts approved 10 mm graded stone grit and including water proofing materials as ordered by the Engineer incharge in the proportion as specified by the manufacturer.(7.2 PWD) SOR-2020 |
| 6 | Brick work with non modular flyash brick conforming to IS: 12894, Class designation 10 average compressive strength in super structure above plinth level up to floor V level in SOR I.NO. 24.01 NEW ITEMCement Mortar 1:4 (1 Cement 4 Coarse sand) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access, platform DSR 18/I.No. 5.9.3 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts. DSR 18/I.No. 5.9.6/P-97 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR-18/I.No. 5.9.5 |
| 10 | R.C.C work with cement, approved coarse sand & 2cm gauge approved stone grit in proportions of 1:2:4 in linels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tols & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. As in item 283 above but for slabs. (SOR I.NO: 5.11) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars. |
| 12 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) (DSR-18/I-13.4.1/P-222) |
| 13 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)(DSR-18/I-13.16.1 |
| 14 | 279 Cement Concrete with 4 cm gauage approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & Plants etc. required for proper completion of work. |
| 15 | Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc, required for proper completion of the work.SOR I.NO. 15.22/ 662 NEW Item Providing wall putty on new surface with approved quality materials of Berger / J.K / Birla or similar make 2 coats. |
| 16 | Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undercorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials labour Tools & plants etc required for proper completion of the work.SOR I.NO. 15.09 649 |
| 17 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 fine sand). DSR 18/I.No. 14.1.1/P- |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 18/I.No. 8.31 |
| 19 | Washed stone grit plaster on exteriorwalls of height upto 10 M. above level in two layers,under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 2 Kg of cement /Sqm top layer 15mm cement plater 1:1/2:2 (1 cement: 1/2 C sand: 2 stone chipping 10mm N.S.) in panels with groove all around as per approved pattern i/c scrubbing and washing the top layer with brusshes and water to expose the stone chipping complete as per. |
| 20 | 10 cm thick (average) mud parka of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral waterproofing compound by weight of cement and finished neat : With common burnt clay F.P.S.(non modular) brick tile of class designation 10. DSR 18/I.No. 12.16.1/P- |
| 21 | Providing gola 75x75mm in cement concrete 1:2:4(1cement:2 C. sand:4 graded stone agg. 10mm and down gauge) including finishing with cement mortar 1:3(1cement:3 fine sand) as per standard design. In 75x75mm deep chase. DSR/I. no. 12.21.1 |
| 22 | Making Khurra 45cms x 45cms with c.c, 1:2:4 average 5cms thick including supply of all materials, labour, T and P etc required for proper completion of work. SOR I.NO 21.20 NEW ITEM |
| 23 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) 25 mm thick. |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required to colour to give an even shade. Two or more coat on new work. (DSR 2018 I.No. 13.61.1/P-227) |
| 25 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove. |
| 26 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR-2018/I.no. 10.25.2 |
| 27 | Renewing panes of glass in door, window & ventilators of fixing in the new work with 3mm. Thick, glasspanels fixed with beads & putty including supply of all materials, labour, tools & plants, required for proper completion of work. |
| 28 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm. |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mmflush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. DSR-2018/I.No:17.2.1 |
| 30 | P/F uplasticsed PVC connection pipe with brass unions : 45cm length 15mm nominal bore. DSR I.No:18.21.2.1 |
| 31 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. DSR 18/I.No. 18.49.1/P-300 |
| 32 | ProvidingandfixingC.P.brassanglevalveforbasinmixerand geyserpointsofapprovedqualityconformingtoIS:8931: 15mm nominal bore. DSR/I. no. 18.53.1 |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR/I. no. 18.48 |
| 34 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. DSR-18/I.No. 17.7.4 |
| 35 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 36 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. DSR 18/I.No. 12.41.1/P- |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR 18/I.No.17.1.1/P-287 |
| 38 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 510x1040mm bowl depth 250 mm |
| 39 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 40 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. DSR-2018/I.no.9.83 |
| 41 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm9.97.3 |
| 42 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVCplain&brassthreadedfittings,i/cfixingthepipewith clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as perdirectionofEngineerinCharge.Concealedwork,including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes. DSR-18/I.no. 18.8.3 |
| 43 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 18/I.No. 9.21.1 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
