Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Providing 300 mm dia 5.0m long single under reamed RCC piles in foundation withM-25 grade concrete using 20 mm & down graded size crusher broken hard granitechips including cost of boring, hoisting & laying concrete in bore hole, compacting, preparation of head including dismantling, cost of material, conveyence, royalty & taxes, labour, T&P but excluding cost of MS rods / Tor steels, etc. complete to shape as per direction of Engineer-in-charge.(Up to 5mtr.) |
| 2 | Removing old lime and cement plaster from walls including racking out the joints 12mm deep and removing the debris within 50m lead etc.complete as per direction of the Engineer-in-charge. |
| 3 | Removing old grading plaster from RCC slab, cleaning the surface, lowering & removing the debris within 50m lead with all labour & T&P etc. complete as per direction of the Engineer-in-charge. |
| 4 | Dismantling brick or stone masonry in lime or cement mortar above 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead etc. complete as per direction of the Engineer-in-charge. |
| 5 | Dismantling and removing marble chipps dados & skirting from walls incluiding raking out joind 12 mm deep stacking of the materials for reuse and removing the debris within 50 meter leadetc. complete as per direction of the Engineer-in-charge. |
| 6 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc.complete as per direction of the Engineer-in-charge. |
| 7 | Supplying and fitting- fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Casement Toilet Door-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames , 102 mm x 60mm x2.25 mm for casement Door Sash Profile and74mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like Toilet loking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site , incluing cost and conveyance of all materials, accessories, labour charge. The materials and product conforming to ASTM D 638-14, EN-477-95 and otjer applicable codes and standards. |
| 8 | Providing 12mm thick C.P. in C.M.(1:3) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge. |
| 9 | Providing 12mm thick C.P. in C.M.(1:4) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.(Ground floor) |
| 10 | Providing 12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.(Ground floor) |
| 11 | Providing 16mm thick plaster in c.m. (1:6) over brick / stone work finished smooth with cost & conveyance of materials, labour, T&P, royalty, taxes, curingetc. complete as per direction of the Engineer-in-charge.(Ground floor) |
| 12 | Finishing wall surface with Acrylic wall putty (water based ) of approved make and finish smooth and even surface to receive paintingincluding necessary preparation of surface, cost & conveyance of materials, labour, T&Petc. complete as per direction of the Engineer-in-charge. |
| 13 | Painting two coats withplastic emulsion paint of approved brand on concrete/steelsurfaces after thorough cleaning of surface to give an even shade as per drawing and Technical Specification & the Direction of the Engineer in charge. |
| 14 | Painting onecoats over a coat of piming to newwork with approved quality of paint & primer including cost of allmaterials labour, T&P etc.complete as per direction of the Engineer-in-charge. |
| 15 | Wall painting two coats with 100% acrylic emulsion paint (1st quality) weather seal coat exterior grade of approved make & shade manufactured by reputed manufacture like NEROLAC/ASIAN//BERGER/DULOX orequivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost of allmaterials labour, T&P etc.complete as per direction of the Engineer-in-charge. |
| 16 | Wall painting two coats with 100% acrylic emulsion paint (1st quality) weather seal coat exterior grade of approved make & shade manufactured by reputed manufacture like NEROLAC/ASIAN//BERGER/DULOX orequivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost of allmaterials labour, T&P etc.complete as per direction of the Engineer-in-charge. |
| 17 | Providing & fixing Glazed Ceramic tiles (30cmx20cm) confirming to IS 13753 in walls, risers, dado, skirting treads on 12mm thick bed of cement mortar 1:3 (1cement : 3sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost & conveyance of materials,royality labour, T &Petc. complete as per direction of the Engineer-in-charge. (Ground floor) |
| 18 | Providing & fixingvitrified tiles of premium grade having thickness 8mm to 10mm (600mmx600mm) size coloured / printed series (Homogeneous) confirming to IS 13756in floors treads or steps and landing on 25mm thick bed of concrete mortor (1:1) jointed with neat cement punning slury mixed with pigmant the match all shades of the tiles including cost of all materials labour, T&P etc.complete as per direction of the Engineer-in-charge.(Ground floor) |
| 19 | Dismantling and removing marble chipps flooring& skirting from walls incluiding raking out joind 12 mm deep stacking of the materials for reuse and removing the debris within 50 meter leadetc. complete as per direction of the Engineer-in-charge. |
| 20 | Providing and laying 80 mm thick faciory made cementconcrete interloking paver block of M30grade made by block making machine with strong vibratoy compaction, of approved size , design & shape , laid in required colour and paern over and incluiding 50 mm thick Compactedbed of coarse sand , filling the joints with line sand etc.all completedas per direction of the Engineer-in-charge. |
| 21 | 2.5 cm thick gradingconcrete (1:2:2) with 6mm size including cost, conveyance, royalty T&P etc. complete as per direction of Er-in-charge. |
| 22 | Providing Fly ash brick masonary in C.M.(1:6) in super structure with fly wash brick of approved quality and size of 25x12x8 cm including splays, cutting, circular moulding with cost & conveyance of materials, labour ,T&P, royalty, taxes, curingetc. complete as per direction of the Engineer-in-charge. |
| 23 | Providing Fly ash brick masonary in C.M.(1:6) in foundation & plinth with fly wash brick of approved quality and size of 25x12x8 cm including splays, cutting, circular moulding with cost & conveyance of materials, labour ,T&P, royalty, taxes, curingetc. complete as per direction of the Engineer-in-charge. |
| 24 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 Mtr. C/C and stainless square pipe bracing os size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete as per specification & direction of Engineer-in-charge. |
| 25 | Providing R.C.C.M-25 Grade in foundation having a minimum compressive strength( In work test)250 Kg./ cm 2 in 15 cm. cubes at 28 days curing after mixing and test conducted inaccrdance with I.S. 456 and I.S. 516 using 12mm. To 20mm. Size black hard crusher broken granite stone chips ofapproved quality and fromapproved Quarry including hoisting to required height lowering laying position and compacting concrete by appropriate vibretors and watering and curing for 28 days including cost of rigid smooth steel centering shuttering and finishinf the exposed surface as directed including cost conveyance, royalities and taxes of all meterials and cost of all labour, T&P required for the concreteetc complete in all respect but excluding cost of M.S.Rods or Tor steel etc, complete as per.specification & direction Engineer-in-charge. (a) beam& roof slab |
| 26 | Providing & fixinginposition uncoatedHigh yield deformed barsreinforcement with cutting, bending, binding, straightening, tyingand placing in position (SAIL) withcost of binding wire 18 to 20 gauge includingcost & conveyance of materials, labour ,T&P, taxes etc. complete to shape as per direction of the Engineer-in-charge (Ground floor ) |
| 27 | Providing Weep holes in PCC abutment returnwall with100mm dia A.C pipe extending through the full width of the structure with slope of IV:20 H towards draining face etc. complete as per direction of the Engineer - in - Charge. |
| 28 | Earth work in excavation of foundation in all kinds of soil with all leads and lifts and to required depth including dressing and levelling the bed and depositing the excavated materials away from work site etc.complete as per direction of the Engineer-in-charge. |
| 29 | Filling foundation and plinth with sand well watered and rammed including cost, conveyance of materials, labour T&P, royalty etc. complete as per direction of the Engineer-in-charge. |
| 30 | Providing P.C.C. M-15 grade using 20mm & down graded size h.g. chips of approved quality including hoisting laying concretewith rigid smooth centering / shuttering, necessary scaffolding,cost & conveyance of materials, labour,T&P, royalty, taxes, curing etc.complete but excluding cost of reinforcement and as per direction of the Engineer-in-charge. |
| 31 | Providing Cement concrete grade M-20 Grade in foundation having a minimum compressive strength( In work test)250 Kg./ cm 2 in 15 cm. cubes at 28 days curing after mixing and test conducted inaccrdance with I.S. 456 and I.S. 516 using 12mm. To 20mm. Size black hard crusher broken granite stone chips ofapproved quality and fromapproved Quarry including hoisting to required height lowering laying position and compacting concrete by appropriate vibretors and watering and curing for 28 days including cost of rigid smooth steel centering shuttering and finishinf the exposed surface as directed including cost conveyance, royalities and taxes of all meterials and cost of all labour, T&P required for the concreteetc complete in all respect but excluding cost of M.S.Rods or Tor steel etc, complete as per.specification & direction Engineer-in-charge. Wall & saucer drain |
| 32 | Providing Cement concrete grade M-20 Grade in foundation having a minimum compressive strength( In work test)250 Kg./ cm 2 in 15 cm. cubes at 28 days curing after mixing and test conducted inaccrdance with I.S. 456 and I.S. 516 using 12mm. To 20mm. Size black hard crusher broken granite stone chips ofapproved quality and fromapproved Quarry including hoisting to required height lowering laying position and compacting concrete by appropriate vibretors and watering and curing for 28 days including cost of rigid smooth steel centering shuttering and finishinf the exposed surface as directed including cost conveyance, royalities and taxes of all meterials and cost of all labour, T&P required for the concreteetc complete in all respect but excluding cost of M.S.Rods or Tor steel etc, complete as per.specification & direction Engineer-in-charge. Cover slab |
| 33 | Providing P.C.C. (1:3:6)with 4cm size h.g. metal of approved quality in foundation& plinthincluding hoisting laying concrete,cost & conveyance of materials, labour ,T&P, royalty, taxes, curingetc. complete as per direction of the Engineer-in-charge. |
| 34 | Providing Cement concrete (1:2:4) with 12mm size H.G.chip of approved quality from approved quarry in foundation including hoisting laying concrete including royalty, watering curing etc.complete as per direction of the Engineer-in-charge. |
| 35 | Precasting and placing in position 125 mm dia bollard 600 mm hight of required shape incluiding providing M.S pipe sleeve 50 mm dia 300 mm long in the bollard and M.S pipe 40 mm dia and 450 mm long with 150x150x6mm M.S plate welded at bottom and embeddded 150 mm in cement concrete( 1:3:6 ) incluiding necessary excavation of size 250x250x450 mm deep for the same etc. complete as per direction of the Engineer-in-charge |
| 36 | Fitting & fixing Vitrified tiles in floors treads or steps and landing on 25mm thick bed of concrete mortor (1:1) jointed with neat cement punning slury mixed with pigmant the match all shades of the tiles including cost of all materials labour, T&P etc.complete as per direction of the Engineer-in-charge. |
| 37 | Painting two coats of synthetic enamel paint over a coat of primeron steel surface including necessary preparation of surface, cost & conveyance of materials, labour, T&Petc. complete to shape as per direction of the Engineer-in-charge. |
| 38 | Providingand Fixing ISI marked flush doo shutters conforming to IS :2202 (part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face varneers on both face of shutter etc. complete to shape as per direction of the Engineer-in-charge. |
| 39 | Supplying atsite angel iron post and strut of required size incluiding bottom to be split and bent at right angel in position in opposite direction for 10 com length and drilling holes up to 10 mm dia etc. complete to shape as per direction of the Engineer-in-charge. |
| 40 | Fencing with angel iron post placed at required distance embedded incement concrete blockevery 15 th post last but one end post and comer post shall be strutted on both side and post on one side only provided wiyh horizonal line and two diogonal interwoven with horizontal wires, of barbed wire weight 9.38 kg per 100 m (Minimum) between the two post fitted and fixed with G.I staples ,tum buckles etc. complete cost of post struts, concrete workto be paid for separately ) etc. complete to shape as per direction of the Engineer-in-charge. |
| 41 | Fitting and fixing mosquito net in window incluiding non-sal wood beading with cost of nail etc.complete & as per specification & direction of the Engineer-in-charge. |
| 42 | Providing PCC M-30 grade with 20mm & down grade h.g. chips of approved quality including hoisting laying concrete with cost & conveyance of materials, labour, T & P royalty, taxes, watering, curing etc.complete & as per specification & direction of the Engineer-in-charge. |
| 43 | Providing R.C.C.M-20 Grade in foundation having a minimum compressive strength( In work test)250 Kg./ cm 2 in 15 cm. cubes at 28 days curing after mixing and test conducted inaccrdance with I.S. 456 and I.S. 516 using 12mm. To 20mm. Size black hard crusher broken granite stone chips ofapproved quality and fromapproved Quarry including hoisting to required height lowering laying position and compacting concrete by appropriate vibretors and watering and curing for 28 days including cost of rigid smooth steel centering shuttering and finishinf the exposed surface as directed including cost conveyance, royalities and taxes of all meterials and cost of all labour, T&P required for the concreteetc complete in all respect but excluding cost of M.S.Rods or Tor steel etc, complete as per.specification & direction Engineer-in-charge. (a) pile cap |
| 44 | Grade beam |
| 45 | Plinth bend |
| 46 | Column |
| 47 | iron work wrought and put up in trusses andrecord racks incluiding the cost of material 9 pipe,angel,base plate, steel plate nout bolts etc.) |
| 48 | Providing and fixing Chequred tiles of 300x300mm size ofpremium grade having thickness 8mm to 10mm thick treads or steps and landing on 25mm thick bed of concrete morter (1:1) jointed with neat cement punning slury mixed with pigment the match all shades of the tiles including cost of all materials labour, T&P etc. complete as per direction of Engineer-in-Charge. |
| 49 | Providing andfixingTata blue scoope sheetin roof including fixing of ridges, windties including cost, conveyance of A.C.sheet and including cost of fittings etc.complete as per direction of the Engineer-in-charge. |
| 50 | Providing two coats of distemper over a coat of cement primer on wall surface including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge. |
| 51 | Distempering two coats with distemper of approved shed over new wall surface including cost of all materilas, labour, T&P etc.complete as per direction of the Engineer-in-charge. |
| 52 | P.H. Dismantling and removing old tiled flooring including removing the old base and stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C |
| 53 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep, stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C |
| 54 | Supplying all materials, labour T&Pand providing c.c (1:3:6) using 4cm h.g. metal including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 55 | Supplying all materials, labour T&Pand fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specificatIon & direction of EIC |
| 56 | Supplying all materials, labour T&Pand fixing porcelain glazed tilesin dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge. |
| 57 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD) Casement Door - 60-. Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.5mm for outer frames . 102 mm x 60 mm x 2.25 mm for casementDoor Sash profile and 74 mm x 60 mm x 2.5 mm mullion profile Capable of mounting single glazing system , structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of2.0 mm prefabricated & welded through fusion welding the doorsash shall be fitted with 12 mm thick WPC Board of Greenply make duly fixed with EPDM weatheringseal resistant accessorieslike clipping locking system made of aluminimum 1 No, per set of sashes ans the system is to be installed at the site using anchor fasteners , silicon rubber sealant , easy glazing/deglazingat site etc, including cost and conveyance of all materials , accessories, labour charges, materials and product conformingto ASDM D 638-14, EN 477-95 |
| 58 | Supplying all materials, labour T&Pand fixing water closet, (Orissa pattern squating pan) duly embeded in c.c. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C. a) (583x440)mm Orissa pan (Neycer/Cerra/ Parry ware/ Hindware) |
| 59 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral ‘S’ or ‘P’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C a) E.W.C. with ‘S’ trap plain(Neycer/Cerra/ Parrywear/ Hindware) |
| 60 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C.(Neycer/Cerra/ Parrywear/ Hindware) |
| 61 | Supplying all materials, labour T&P and fitting & fixing U-PVCventilating pipes and fittings of the following O.D conforming to ISI No. 4985/2000 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer’s specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C. a)110 mm dia U-PVCPipes(4 Kgf/Cm2) |
| 62 | b) 110 mm dia U-PVC P’ Trap |
| 63 | c) 110 mm dia U-PVC Door Tee |
| 64 | d) 110 mm dia U-PVC Door Bend |
| 65 | e) 110 mm dia U-PVC Plain Bend |
| 66 | f) 110 mm dia U-PVC Plain Tee |
| 67 | g) 110 mm dia U-PVC Door Cross Tee |
| 68 | h) 110 mm dia U-PVC Offset |
| 69 | i) 110 mm dia U-PVC Cowl |
| 70 | j) 125 mm dia C.P.grating |
| 71 | k) 75 mm dia U-PVCPipes(4 Kgf/Cm2) |
| 72 | l)75 mm dia U-PVCDoorbend |
| 73 | m) 75 mm dia U-PVCPlainbend |
| 74 | n) 75 mm dia U-PVCPlain Tee |
| 75 | o) 75 mm dia U-PVCDoor Tee |
| 76 | p) 75 mm dia U-PVCCowl |
| 77 | Supplying all materials, labour T&Pand cutting holes through brick/stone masonary walls for taking PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. a) 250 mm thick wall |
| 78 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C. 550mm x 400mm under counter WHB with all Fittings. (Neycer/Cerra/ Parry ware/ Hindware) including 32mm dia C.P. Waste, 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe |
| 79 | 550mm x 400mm WHB with all Fittings. (Neycer/Cerra/ Parry ware/ Hindware) including 32mm dia C.P. Waste, 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe |
| 80 | Supplying all materials, labour T&P and fixing pedestal for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware) |
| 81 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C. a) 2000mm x 450mm B.E.Mirror (fixed type) |
| 82 | a) 600mm x 450mm B.E.Mirror (fixed type) |
| 83 | Supplying all materials, labour T&Pand fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.a) 600mm Long Single Towel Rail [Jaquar] |
| 84 | b) C.P. Towel Ring Round |
| 85 | Supplying all materials, labour T&Pand fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of E.I.C a) Soap Dish Holder |
| 86 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C a) 450mm x 125mm size Acrylic shelf |
| 87 | Supplying all labour, T&P, materials & fixing wash Porcelain sinkwith M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.a) 600mm x 450mm x 200mm Porcelain sink including 40mm dia C.P. Waste & 40mm dia PVC Waste Pipe with brass coupling Nut |
| 88 | Supplying all materials, labour T&Pand fixing glazed earth wire squatting plate size 450 x 350 mm with integral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150 mm C.C. (1:5:10) using 40 mm h.g. metal all complete as per P.H. specification and direction of E.I.Ca) 450x300mm Squatting Urinal (Ladies) [Neycer/CerraParrywear/Hindware] |
| 89 | Supplying all materials, labour T&Pand fixing bowl pattern urinal including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C. a) Flat back lipped wall urinal (standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe [Neycer/CerraParrywear/Hindware] |
| 90 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tankand placing the tankto the required position including all complete as per specification and direction of EIC.(including cost of FG Over Head Tank) a) 2000 Ltrs. Capacity F.G.Over Head Tank. |
| 91 | b) 1000 Ltrs. Capacity F.G.Over Head Tank. (1st floor) |
| 92 | Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class KB. brick work in c.m, (1:6) of 0.46m. height in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size KB. bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.64mtr xl.64mtr x0.l0mtr thick, R.C.C. beam of size 0.25m X 0.30m and 2.60m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.Ca)For 2000 Ltr. Capacity Over Head Tank(1stfloor) |
| 93 | b)For 1000 Ltr. Capacity Over Head Tank(1stfloor) |
| 94 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-40/80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C 15 mm dia PVC Pipe(Sch-80)[Internal] |
| 95 | c) 20 mm dia PVC Pipe(Sch-80) [Internal] |
| 96 | a) 25 mm dia PVC Pipe(Sch-80) [Internal] |
| 97 | d) 25 mm dia PVC Pipe (Sch-80)[External] |
| 98 | e) 32 mm dia PVC Pipe (Sch-80)[External ] |
| 99 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
| 100 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 101 | Supplying all materials, labour, T&P and fitting & fixing brass /C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C. 15 mm dia C .P S.B. Bib Cock [Jaquar] |
| 102 | 15 mm dia C .P L.B. Bib Cock[Jaquar] |
| 103 | 15 mm dia C .P (c) Stop Cock[[Jaquar] |
| 104 | 15 mm dia C .P Angle Stop Cock[Jaquar] |
| 105 | 15 mm dia C .P Pillar Cock[Jaquar] |
| 106 | 15mm dia C.P. Two Way Bib cok[Jaquar] |
| 107 | 15mm dia C.P. Health Faucet(ABS Body) with 1 meter Long Easy flexTube in chrome Finish & wall Hook[Jaquar] |
| 108 | 15 mm dia C .PBib Cock with Elbow Action[Jaquar] |
| 109 | 15 mm dia C .PPiller Cock with Extended Lever Handle[Jaquar] |
| 110 | 15 mm dia C .P Extension Piece |
| 111 | 15x100mm dia C.P. Shower (jaquar) |
| 112 | 25 mm dia PVC F.W.V |
| 113 | 32 mm dia PVC F.W.V |
| 114 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C[Neycer/Cerra/Hindware/Parrywear] |
| 115 | Earth work in all kinds of soil in excavation of foundation trenches within 50 m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding o.30 in depth and as per direction of E.I.C . a) Initial lift up to 1.50m |
| 116 | b) 2nd depth upt 3.00 mtr |
| 117 | Supplying all materials, labour T&P and filling in F&P with river sandwell watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 118 | Supplying all materials, labour T&Pand providing c.c (1:3:6) using 4cm h.g. metal including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 119 | Supplying all materials, labour T&Pand providing c.c (1:1.5:3) using 12 mm h.g. chips including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 120 | Supplying all materials, labour, T&P and providing brick work with KB.bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% inincluding watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. a) In Foundation & Plinth in CM (1:4) |
| 121 | b) In Super Structure in CM (1:6) |
| 122 | Supplying all materials, labour, T &P and providing C.C (1:1.5 :3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C. |
| 123 | Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire18 to 20 gauge, conveyance of all materials to worksite etc. complete as per directio n of E.I.C. |
| 124 | Supplying all materials, labour, T&P and providingrigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per direction of E..I.C. |
| 125 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. a) 12mm thick C.P with C.M. (1:3) |
| 126 | b) 20mm thick C.P with C.M. (1:3) |
| 127 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 128 | Supplying all materials, labour, T&P and providing cement flush pointing to brick masonary (1:3) including watering, curing conveyance of all materials to work site, payment of royality, taxes etc. all complete as per direction of E.I.C. |
| 129 | Supplying all labour, materials T&P andfixing ofR.C.C. Baffle wallpre-cast with C.C. (1:1.5:3) using 12 mm b.h.g. chips and fitted to septic tank as per P.H. Specification and direction of E.I.C. |
| 130 | Supplying all materials, labour, T&PProviding and fixing PVC Tee in all including supply of all jointging materials etc. all complete materialsto as per specification and direction of E.I.C. a) 110mm x110mm x110mm PVC Tee |
| 131 | a) 160mm x160mm x160mm PVC Tee |
| 132 | Supplying all materials, labour, T&P and providing pre-cast R.C.C. Manhole cover with C.C. ( 1:1.5:3) of 12 MM h. g. chips including conveyance of all materials to site after payment of royality and taxes etc.all complete as per PH.Specification and direction of Engineer-in-charge. |
| 133 | Filling F&P with excavated materials, including watering and ramming as per direction of E.I.C. |
| 134 | Supplying all materials, labour T&Pand costructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1 1.5:3) using 12 mmsize h.g. chips foundation concrete (1:3:6) using 40 mm size h.g. metal on bed and arround trap KBbrick work in c.m. (1:6) in F&P and inside 12mm thick c.p (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C. a) Inside size 250mm x 250mm gully trap Chamber |
| 135 | Supplying all materials, labour T&Pand constructing Inspection chamber of the following sizes with c.c (1:3:6) using 40mm size h.g. metal on bed, Ist class K.B. brickwork in c.m (1:6), moulding and shaping the channel inside andbenching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab in c.c. (1:11/2:3) using 12 mm size h.g. chips with R.C.C. m.h. cover, e.w. in excavation in all kinds of soil and refilling the cavity arroundthe chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. a) Inside size 760mm x 760mm x 460mmI.C. |
| 136 | Supplying all materials, labour T&Pand constructing Man hole Chamberof the following sizes with c.c. ( 1:3:6) using 40 mm size h.g. metal on bed Ist class K.B. brick work in c.m. (1:6) moulding and shaping the channel inside and benching with c.c (1:11/2:3) using 12mm size h.g. chips, 12 mm thick c.p (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C. cover slab in c.c (1:11/23) using 12 mm size h.g. chips with R.C.C m.h. cover, e.w in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. a) (I) Inside size 910mm x 910 mm x 600 mm |
| 137 | Supplying all materials, labour, T&P and laying 110/160 mm dia U-PVC Pipe and aligning to requisite gradient inside the trench encasingall round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C. a) 110 mm dia U-PVC Pipe Sewerage line with all round encasing ( IS-4985/2000- 4 Kgf/Cm2) |
| 138 | b) 160 mm dia U-PVC Pipe Sewerage line with all round encasing ( IS-4985/2000- 4 Kgf/Cm2) |
| 139 | Supplying all materials, labour T&Pand constructingsoak way pit of the following sizes with dry brick walling form bottom up to invert of inlet pipe and 1st class K.B. brickwork in c.m(1:6) for the remaining height at top, 12 mm thick c.p(1:4) inside and outside over masonary brickwork gravel packing in the rear of well steining R.C.C. cover slab in c.c (1:11/2:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in stoney earth and refilling the cavity around the pit & painting the iron works, watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of E.I.C. 1.4mtrs.dia x 2.0mtr.deep soak way pit |
| 140 | 1.2mtrs.dia x 2.0mtr.deep soak way pit |
| 141 | 1.0mtrs.dia x 2.0mtr.deep soak way pit |
| 142 | E.I. Recessed wiring to light point/exhaust fan point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) (i)-do- Group A |
| 143 | -do- Group B |
| 144 | -do- Group C |
| 145 | Recessed wiring to Fan Point in... (i) -do- Group B |
| 146 | -do- Group C |
| 147 | Recessed wiring to Call Bell Point in...(i) -do- Group C |
| 148 | S/F of batten holder BK Angle holder ISI marked including connection etc replacing Ceilling Rose |
| 149 | S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 150 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required. (1.25.1+1.25.4+6 Mod) |
| 151 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required (1.25.3+1.25.5+4 mod) |
| 152 | S/F of Power point with 2 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modular Socket, connection, painting etc as required for A.C. |
| 153 | S/F of 5/6 Amp Modular Switch(1.25.1) |
| 154 | S/F of 1 no of 5 pin 15/16 amp.Socket , 1 no of switch & 1 no of15/16A top with modular , 20 AMCB, in 6 modular box with cover with connection, painting etc as requiredfor Inverter connection(1.25.3+1.25.5+2.6.1+6 mod) |
| 155 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.(i) 2 Modular box with base & cover |
| 156 | 4 Modular box with base & cover |
| 157 | 6 Modular box with base & cover |
| 158 | 8 Modular box with base & cover |
| 159 | 12 Modular box with base & cover |
| 160 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard) (i) 2x1.5+1x1.5 (1.8.1) |
| 161 | 2x2.5+1x1.5 (1.8.2) |
| 162 | 2x4+1x1.5 (1.8.3) |
| 163 | 2x6+1x2.5 (1.8.4) |
| 164 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 165 | S/F of \"B/C/D\" series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 166 | S/F of \"C\" series DP MCB of 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in theISI marked complete with connection, testing and commissioning etc. as required(Make-Le-Grand/Anchor/Havells/HPL) |
| 167 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) (i) S/F of MCB 4 way Double Door (2.3.5 ) |
| 168 | S/F of MCB 8 way Double door (2.3.6) |
| 169 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) (i) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 170 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 171 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 172 | Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 173 | Supply, Installation, Testing & Commissioning of Exhaust fan of 225 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (Make-Usha/Orient/Almonard/Bajaj) |
| 174 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 175 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch& 1 no ofMCB complete with wiring on 12 modularM.S. box with modularcover. (1.25.1+1.25.4+2.6.1+12 mod) |
| 176 | S/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 177 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Millenium/Crompton-Jura /Anchor-XL/Havels-Velocity/Spark/Orient-Summer pride ) |
| 178 | S/F electric ceiling fan regulatorin existing switch boardincluding connection with 1.5 sqmmFR PVC single core insulated multistrand copper conductor earthingthe regulator as required (1.38) |
| 179 | S/F of 400mm A.C. wal fan with 5A socket on a 100mm×100mm×60mm MS bos (Make:Usha-Mist air/Crompton-wmhiflo wave /Havels-swing) |
| 180 | Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 ) |
| 181 | Supply & Fixing of 30-35Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 182 | Supply & Fixing of 60 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 183 | S/F of electronic 10w Watt LED Bulb(Make-Havells/Philips/Crompton/Polycab/HPL) |
| 184 | S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire |
| 185 | SITC of 2000 VA 24V Sine wave outputInverter(Make- Luminous/Excide/Livguard) with 2 nos. Of tall tubular 12V,150 Ah battery(Make-Luminous /Excide/Livguard ) |
| 186 | S/F of 25 amp motor starter/A.C. Starter switch with all connections(Make-Anchor/Cona/Le-Grand) |
| 187 | S/F of1.5 ton 5 star Inverter model split type A.C. Machines ( Make-Carrier/Bluestar/Hitachi) |
| 188 | S/F of 4 KVA stabilizer 110V to 300V(Make- V guard/ Microtech) for 1.5 ton A.C. machines |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
