Public Works Department-PWD has published Tender For Construction Of Science Lab In Govt Ser. Sec. School Building At Dalash District Kulllu H.P. (Sh:- Construction Of Balance Work Of Science Lab. (Above First Floor) As Per Architect Drawing No. 276,290 And291 Of Job No. 3305. ). Submission Date for this Tender is 18-04-2023. Building Work Tenders in nirmand Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m (one point five metre) in width or 10 sqm (ten square metre) on plan), including dressing of sides and ramming of bottoms lift up to all depth & heights, including getting out the excavated soil and disposal of surplus excavated soils as directed, within all leads including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 2 | CONCRETE WORK Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre) nominal size including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 3 | REINFORCED CEMENT CONCRETECentering and shuttering including strutting, propping etc. and removal of form including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete for:-Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 4 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like Floors etc. up to any thickness. |
| 5 | Beams, cantilever, girders and lintels sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor. |
| 6 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 7 | Stairs, (excluding landings) except spiral staircases. |
| 8 | Edges of slabs and breaks in floors and walls in any width Under 20 cm (twenty centimetre) wide |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen degree) landings, balconies, shelves, chhajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement: one point five coarse sand: three graded stone aggregate 20 mm (twenty millimetre) nominal size) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size)including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 11 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand: three graded stone aggregate 20 mm (twenty millimetre) nominal size) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 12 | Providing and laying in position machine batched and machine mixed design mix M-25 (M-twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works up to plinth level including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 14 | BRICK WORK Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundation and plinth in: Cement mortar 1:6 (one cement : six coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (one cement: six coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 16 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundations and plinth in : Cement mortar 1:3 (one cement : three coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (one cement :four coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 18 | DOORS AND WINDOWS Providing and fixing M.S. channel of required size forframeof doors Windows (ISLC) with M.S. flat in combination and MS flat for rebate welded together to make one frame including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 19 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm (thirty five millimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 20 | Providing and fixing aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 6 mm (six millimetre) thick DOUBLE glass unit, including ISI marked M.S. pressed butt hinge bright finished of required size with necessary screws.40mm (forty millimetre) thick 2nd (second) class deodar wood OPENABLE SHUTTER including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 22 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four) in both directions with wire of diametre 0.63 mm (zero point six three millimetre), for doors, windows and clerestory windows with hinges and necessary screws: 35 mm (thirty five millimetre) thick shutters including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm (four millimetre)thick float glass panes, including ISI marked M.S. pressed butt hinge bright finished of required size with necessary screws.40mm(forty millimetre) thick 2nd class deodar wood includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 24 | Providing and fixing aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 200X10 MM (two hundred X ten millimetre) |
| 25 | 150X10 MM (one hundred fifty X ten millimetre) |
| 26 | Providing and fixing aluminium handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.:125 mm (one hundred and twenty five millimetre) |
| 27 | 100mm (one hundredmillimetre) |
| 28 | 75mm (seventy five millimetre) |
| 29 | Providing and fixing ALUMINIUM hard drawn hooks and eyes complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete :250mm (two hundred and fifty millimetre) |
| 30 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. fltas, Square or round bars etc. including priming coat with approved steel primer all Complete : Fixed to steel windows by welding including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete : |
| 31 | FLOORING AND PANNELING Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In flooring on a bed of 10 mm thick mortar 1:4 (one acid proof cement : four coarse sand) (Bell-Orient/Nitco /Kajaria)including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 32 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In dado/skirting on 12 mm thick mortar 1:4 (one acid proof cement : four coarse sand) (Bell-Orient/Nitco /Kajaria)including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 33 | Kota stone slab flooring over 20 mm (twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (one cement: four coarse sand): 25 mm (twenty five millimetre) thick including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 34 | Kota stone slabs 20 mm (twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 35 | Cement concrete flooring 1:2:4 (one cement: two coarse sand: four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm (forty millimetre) thick with 20 mm (twenty millimetre) nominal size stone aggregate including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 36 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 37 | Providing and Fixing First Quality White Ceramic glazed Floor Tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Size 300x 450 mm (Bell-Orient/Nitco /Kajaria) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 38 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 39 | ROOFING Providing and fixing 0.62mm (Zero point six two millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) micronsprimer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with screws, pre-painted iron J or L hooks, bolts and nuts 6mm(six millimetre) diametre with pre-painted limpet and rubberwasher including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 40 | Providing and fixing ridges or hips 62 cm (sixty two centimetre) overall with 0.62mm (Zero point six two millimetre) thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 microns (twenty microns) over 5 (five) micronsprimer coating + back coat of polyester of 5 (five)microns over 5 (five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts & nuts 6mm (six millimetre) diametre & pre-painted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 41 | Providing and fixing valley 90 cm (ninety centimetre) overall 0.62mm (Zero point six two millimetre) thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with pre-painted G.I. limpet and bitumen washers complete with all accessories including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 42 | Providing and fixing 30 cm (thirty centimetre) wide, 30 cm (thirty centimetre) deepsemi-circular pre-painted sheet gutter with iron brackets 40x3mm (forty X three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. :0.80 mm (zero point eight zero millimetre) thick with zinc coating not less than 275gm/m2 (two hundred and seventy five grams per square metre) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 43 | Providing and fixing M.S. BP Sheet 1.66mm (one point double six millimetre) to 2mm (two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 44 | Providing and fixing tiled false ceiling of specified materials of size 610x610 mm (six hundred ten X six hundred ten millimetre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm(at the rate of one hundred twenty grams per square metre), both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm (twenty four X thirty eight millimetre) made from 0.30 mm (zero point three zero millimetre) thick (minimum) sheet, spaced at 1200 mm (twelve hundred millimetre) center to center and cross "T" of size 24x25 mm (twenty four X twenty five millimetre) made of 0.30 mm (zero point three zero millimetre) thick (minimum) sheet, 1200 mm (twelve hundred millimetre) long spaced between main "T" at 600 mm (six hundred millimetre) center to center to form a grid of 1200x600 mm (twelve hundred X six hundred millimetre) and secondary cross "T" of length 600 mm (six hundred millimetre) and size 24x25 mm (twenty four X twenty five millimetre)made of 0.30 mm(zero point three zero millimetre) thick (minimum) sheet to be interlocked at middle of the 1200x600 mm(twelve hundred X six hundred millimetre) panel to form grids of 600x600 mm (six hundred X six hundred millimetre) and wall angle of size 24x24x0.3 mm (twenty four X twenty four X zero point three millimetre) and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm (twenty seven X thirty seven X twenty five X one point six millimetre) fixed to ceiling with 12.5 mm (twelve point five millimetre) diametre and 50 mm (fifty millimetre) long dash fasteners, 4 mm (four millimetre) GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm (eighty five X thirty X zero point eight millimetre) spaced at 1200 mm (twelve hundred millimetre) center to center along main T, bottom exposed width of 24 mm (twenty four millimetre) of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 610x610 mm (six hundred ten X six hundred ten millimetre)and 0.6 mm (zero point six millimetre) thick with 8 mm (eight millimetre) drop; made of GI sheet having galvanizing of 100 gms/sqm (one hundred grams per square metre) (both sides inclusive) and 20% (twenty percent) perforation area with 1.8 mm (one point eight millimetre) diametre holes and having NRC (Noise Reduction Coefficient ) of 0.5 (zero point five), electro statically polyester powder coated of thickness 60 (sixty) microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. The work shall be carried out as per specifications, drawing and including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 45 | STEEL WORKSteel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, kg railings, brackets, gates and similar works including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 46 | Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for un-plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion. (i) Single socketed pipes. 110 mm (one hundred ten millimetre) diametre including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 47 | Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. Coupler :75 mm (seventy five millimetre) |
| 48 | Single tee without door :75x75x75mm |
| 49 | Bend 87.5° (eighty seven point five degree 110 mm (one hundred ten millimetre) bend |
| 50 | Shoe (Plain) 75 mm (seventy five millimetre) Shoe |
| 51 | Providing and fixing to inlet mouth of rain water pipe cast irom grating of 15 cm (fifteen centimetre) diametre and weighting not less than 440 kg (foru hundred forty) kilogrammeincluding carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 52 | FINISHING20 mm (twenty millimetre)cement plaster of mix :1:6 (one cement: six coarse sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 53 | 15 mm (fifteen millimetre) cement plaster on the rough side of single or half brick wall of mix 1:6 (one cement: six fine sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 54 | 6 mm (six millimetre) cement plaster of mix 1:3 (one cement : three fine sand) including curing and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 55 | Finishing walls with 100% (one hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre (fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.:New work (Two or more coats applied @ 1.43litre/10 sqm (at the rate of one point four three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (at the rate of zero point nine zero litre per ten square metre) : New work (Two or more coats applied @ 1.43litre/ 10 sqm (at the rate of one point four three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (at the rate of zero point nine zero litre per ten square metre). Asian Paints including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 56 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work (Asian Paint/Nerolac) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 57 | Finishing with deluxe multi surface paint system for interior and exteriors using primer as per manufactures specification: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 58 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr /10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) of approved brand and manufacture including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 59 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work(Asian Paint/Nerolac) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 60 | Providing and applying white cement based putty of average thickness 1 mm (one millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 61 | Providing and laying integral cement based treatment on roofs of slabs by appling cemet slurry mixed with water proofing cement compound consisting of applying: (Dr. Fixit Pidilite Or its Equivalent) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 62 | Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials up to all leads including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 63 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-Chargeincluding carriage of materials within all leads, lifts and other incidentals including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 64 | Water supply and Sanitary Installations Providing and fixing Polyethylene –Aluminium- Polyethylene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (eighty degree centigrade), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc.including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge comple 2025 (25 mm OD (twenty five millimetre outer dia) pipe |
| 65 | 1620 (20 mm OD(twenty millimetre outer dia) pipe |
| 66 | 1216 (16 mm OD (sixteen millimetre outer dia) pipe |
| 67 | Providing and fixing low level cistern with dual flushing system of hindware or its equivalent, with all fittings and fixtures complete includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 68 | Providing and fixing white vitreous china water closet squatting pan (Indian type): Orissa pattern W.C. pan Hind ware No. 2071 size 58cm x 44 cm (fifty eight centimetre X forty four centimetre) of white shade ofincluding carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 69 | Providing and fixing wash basin with pedastal including C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: no.10001 of Size 55x40 of Hindware or iits Equivalent including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 70 | Providing and fixing 55x40x18cm laboratory sink of Hindware its Equivalent with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever requiredincluding carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 71 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work 40mm (forty millimetre) diametre including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 72 | Providing and fixing 600x450 mm (six hundred X four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 73 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931 :15 mm (fifteen millimetre) nominal boreincludingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 74 | Providing and fixing C.P. brass long nose bib cock 15 mm (fifteen millimetre) nominal bore of approved quality conforming to IS standards and weighing not less than 810 gms (eight hundred ten grams) includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 75 | Providing and fixing C.P. brass angle valve 15 mm (fifteen millimetre) nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 76 | Providing and fixing PTMT soap Dish Holder having length of 138mm (one hundred thirty eight millimetre), breadth 102mm (one hundred two millimetre), height of 75mm (seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms (one hundred six grams) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 77 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.:15mm (fifteen millimetre) |
| 78 | 20mm(twenty millimetre) |
| 79 | Providing and fixing Polyethylene-Aluminium-Polyethylene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tankincludingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete |
| 80 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm(fifteen millimetre) nominal boreincludingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 81 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm(one hundred ten millimetre)includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 82 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150 mm(one hundred fifty millimetre) includingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 83 | Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm (one hundred ten X ninety millimetre) including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 84 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.I) 110mm(one hundred ten millimetre) diameter. |
| 85 | II) 150 mm(one hundred fifty millimetre) diameter. |
| 86 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. completeincludingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. I) 110mm(one hundred ten millimetre) diameter. |
| 87 | II) 150 mm(one hundred fifty millimetre) diameter. |
| 88 | Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. completeincludingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. I) 110mm dia(one hundred ten millimetre) |
| 89 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. I) 110mm(one hundred ten millimetre) diameter. |
| 90 | II) 150 mm(one hundred fifty millimetre) diameter. |
| 91 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. completeincludingcarriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.I) 110mm(one hundred ten millimetre) diameter. |
| 92 | II) 150 mm(one hundred fifty millimetre) diameter. |
| 93 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete.I) 110mm(one hundred ten millimetre) diameter. |
| 94 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (onecement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement :two coarse sand :four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm (ninety X eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (Light duty) 450x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (thirty eight kilogram)(weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) includingcuring and carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
| 95 | Constructing soak pit 1.20x1.20x1.20 m (one point two zero X one point two zero X one point two zero metre) filled with brick bats including S.W. drain pipe 100 mm (one hundred millimetre) diametre and 1.20 m (one point two zero metre) long complete as per standard design including carriage of materials in all leads and lifts and as per directions of The Engineer – in – Charge complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
